Epson STYLUS OFFICE B40W, STYLUS OFFICE T40W BROCHURE

Wireless Networking Basics

This booklet helps you setup a wireless connection between your printer and computers.
See the “Networking Guide” in the Online User’s Guide if you want help with other

network connections such as Wired LAN or Ad Hoc Mode.

Wireless LAN Connection

By using an access point (such as a wireless
router), computers and printers can
communicate wirelessly.

Setup Check Points

Before starting Wireless setup, check that
the access point (or wireless router) is
turned on.

Point 1. Firewall warning

Your firewall or anti-spyware software may display warnings during installation.
Create an exception for EpsonNet EasyInstall to allow it to carry out network
configurations.

For Windows XP Service Pack 2 or later

Confirm that the publisher is SEIKO EPSON, and then click Unblock.

For Mac OS X 10.5.1 or later

Configure the Application Firewall to allow access for EpsonNet EasyInstall.

Point 2. Select a connection method

You need an Ethernet (wired)
connection during installation.

Select the first or second
method depending on your
environment, and then click
Next.

English

Using SES or WPS (Wireless Auto-Set)

To use SES or WPS, they must be supported by your access point (or wireless router).
Complete the following steps without connecting an Ethernet cable.

1. Select the third method.

2. Enable SES or WPS on your access point.

3. Press and hold the WiFi button for three seconds, and then release. Check the two
LED lights flash alternately.

4. After checking that wireless auto setup is complete and the two LED lights are lit,
click Next.

Once you have finished making wireless settings, select a printer and then skip to Point

8.

Point 3. Connect an Ethernet cable

Connect the access point (or wireless router) or your computer to the printer with an
Ethernet cable.

Check the Ethernet cable is inserted in the
Ethernet port.

Point 4. Select a printer

The software searches for and
displays printers on the
network. Select your printer.

Click to refresh the
printer list.

Check that the printer is turned on.

❏ Check! ❏ Check!