Epson Stylus NX510 Service Manual

SERVICE MANUAL

Color Inkjet Printer

Epson Stylus NX510/NX515/SX510W/

SX515W/TX550W

Epson Stylus NX415/SX410/SX415/

TX410/TX419

Epson Stylus NX215/SX210/SX215/

TX210/TX213/TX219/
ME OFFICE 510

Notice:

 All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION.

 The contents of this manual are subject to change without notice.

 All effort have been made to ensure the accuracy of the contents of this manual. However, should any errors be detected, SEIKO EPSON would greatly appreciate being

informed of them.

 The above not withstanding SEIKO EPSON CORPORATION can assume no responsibility for any errors in this manual or the consequences thereof.

EPSON is a registered trademark of SEIKO EPSON CORPORATION.

General Notice: Other product names used herein are for identification purpose only and may be trademarks or registered trademarks of their

respective owners. EPSON disclaims any and all rights in those marks.

Copyright © 2009 SEIKO EPSON CORPORATION.

IJP LP CS QUALITY ASSURANCE DEPARTMENT

PRECAUTIONS

Precautionary notations throughout the text are categorized relative to 1) Personal injury and 2) damage to equipment.

DANGER Signals a precaution which, if ignored, could result in serious or fatal personal injury. Great caution should be exercised in performing procedures preceded by

DANGER Headings.

WARNING Signals a precaution which, if ignored, could result in damage to equipment.

The precautionary measures itemized below should always be observed when performing repair/maintenance procedures.

DANGER

1. ALWAYS DISCONNECT THE PRODUCT FROM THE POWER SOURCE AND PERIPHERAL DEVICES PERFORMING ANY MAINTENANCE OR REPAIR
PROCEDURES.

2. NO WORK SHOULD BE PERFORMED ON THE UNIT BY PERSONS UNFAMILIAR WITH BASIC SAFETY MEASURES AS DICTATED FOR ALL ELECTRONICS
TECHNICIANS IN THEIR LINE OF WORK.

3. WHEN PERFORMING TESTING AS DICTATED WITHIN THIS MANUAL, DO NOT CONNECT THE UNIT TO A POWER SOURCE UNTIL INSTRUCTED TO DO
SO. WHEN THE POWER SUPPLY CABLE MUST BE CONNECTED, USE EXTREME CAUTION IN WORKING ON POWER SUPPLY AND OTHER ELECTRONIC
COMPONENTS.

4. WHEN DISASSEMBLING OR ASSEMBLING A PRODUCT, MAKE SURE TO WEAR GLOVES TO AVOID INJURIER FROM METAL PARTS WITH SHARP EDGES.

WARNING

1. REPAIRS ON EPSON PRODUCT SHOULD BE PERFORMED ONLY BY AN EPSON CERTIFIED REPAIR TECHNICIAN.

2. MAKE CERTAIN THAT THE SOURCE VOLTAGES IS THE SAME AS THE RATED VOLTAGE, LISTED ON THE SERIAL NUMBER/RATING PLATE. IF THE
EPSON PRODUCT HAS A PRIMARY AC RATING DIFFERENT FROM AVAILABLE POWER SOURCE, DO NOT CONNECT IT TO THE POWER SOURCE.

3. ALWAYS VERIFY THAT THE EPSON PRODUCT HAS BEEN DISCONNECTED FROM THE POWER SOURCE BEFORE REMOVING OR REPLACING PRINTED
CIRCUIT BOARDS AND/OR INDIVIDUAL CHIPS.

4. IN ORDER TO PROTECT SENSITIVE MICROPROCESSORS AND CIRCUITRY, USE STATIC DISCHARGE EQUIPMENT, SUCH AS ANTI-STATIC WRIST
STRAPS, WHEN ACCESSING INTERNAL COMPONENTS.

5. REPLACE MALFUNCTIONING COMPONENTS ONLY WITH THOSE COMPONENTS BY THE MANUFACTURE; INTRODUCTION OF SECOND-SOURCE ICs OR
OTHER NON-APPROVED COMPONENTS MAY DAMAGE THE PRODUCT AND VOID ANY APPLICABLE EPSON WARRANTY.

6. WHEN USING COMPRESSED AIR PRODUCTS; SUCH AS AIR DUSTER, FOR CLEANING DURING REPAIR AND MAINTENANCE, THE USE OF SUCH
PRODUCTS CONTAINING FLAMMABLE GAS IS PROHIBITED.

About This Manual

ADJUSTM ENT

REQUIRED

CAUTION

CHECK

P O I N T

W ARNING

This manual describes basic functions, theory of electrical and mechanical operations, maintenance and repair procedures of the printer. The instructions and procedures included
herein are intended for the experienced repair technicians, and attention should be given to the precautions on the preceding page.

Manual Configuration

This manual consists of six chapters and Appendix.

CHAPTER 1.PRODUCT DESCRIPTIONS

Provides a general overview and specifications of the product.

CHAPTER 2.OPERATING PRINCIPLES

Describes the theory of electrical and mechanical operations of the
product.

CHAPTER 3.TROUBLESHOOTING

Describes the step-by-step procedures for the troubleshooting.

CHAPTER 4.DISASSEMBLY / ASSEMBLY

Describes the step-by-step procedures for disassembling and assembling
the product.

CHAPTER 5.ADJUSTMENT

Provides Epson-approved methods for adjustment.

CHAPTER 6.MAINTENANCE

Provides preventive maintenance procedures and the lists of Epson­approved lubricants and adhesives required for servicing the product.

APPENDIX Provides the following additional information for reference:

• Exploded Diagram

• Parts List

Symbols Used in this Manual

Various symbols are used throughout this manual either to provide additional
information on a specific topic or to warn of possible danger present during a
procedure or an action. Be aware of all symbols when they are used, and always read
NOTE, CAUTION, or WARNING messages.

Indicates an operating or maintenance procedure, practice or condition
that is necessary to keep the product’s quality.

Indicates an operating or maintenance procedure, practice, or condition
that, if not strictly observed, could result in damage to, or destruction of,
equipment.

May indicate an operating or maintenance procedure, practice or
condition that is necessary to accomplish a task efficiently. It may also
provide additional information that is related to a specific subject, or
comment on the results achieved through a previous action.

Indicates an operating or maintenance procedure, practice or condition
that, if not strictly observed, could result in injury or loss of life.

Indicates that a particular task must be carried out according to a certain
standard after disassembly and before re-assembly, otherwise the
quality of the components in question may be adversely affected.

Revision Status

Revision Date of Issue Description

A May 7, 2009 First Release

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

Contents

Chapter 1 PRODUCT DESCRIPTION

1.1 Features................................................................................................................... 9

1.2 Printing Specifications. ........................................................................................ 10

1.2.1 Basic Specifications. ................................................................................... 10

1.2.2 Ink Cartridge. .............................................................................................. 11

1.2.3 Print Mode ................................................................................................... 12

1.2.4 Supported Paper. ......................................................................................... 18

1.2.5 Printing Area. .............................................................................................. 20

1.3 Scanner Specifications. ........................................................................................ 20

1.3.1 Scanning Range . ............................................................................................... 21

1.4 General Specifications. ........................................................................................ 21

1.4.1 Electrical Specifications ................................................................................... 21

1.4.2 Environmental Conditions . ............................................................................... 22

1.4.3 Durability. ......................................................................................................... 22

1.4.4 Acoustic Noise. ................................................................................................. 22

1.4.5 Safety Approvals (Safety standards/EMI) . ....................................................... 23

1.5 Interface................................................................................................................ 23

1.5.1 USB Interface . .................................................................................................. 23

1.5.2 Network Interface (NX510 series only) . .......................................................... 24

1.5.3 Memory Card Slots. .......................................................................................... 26

1.6 Control Panel ........................................................................................................ 27

1.6.1 Operation Buttons & LEDs .............................................................................. 27

1.6.2 Control Panel Functions in Each Mode ............................................................ 30

1.7 Specification for Each Function . ......................................................................... 34

1.7.1 Stand-alone Copy Function . ....................................................................... 34

1.7.2 Scan Function (NX510/SX210 series only) . .............................................. 36

1.7.3 Memory Card Direct Print Function. .......................................................... 36

1.7.4 Camera Direct Print Function (PictBridge) (NX510/SX410 series only) .. 42

1.7.5 Reprint/Restore Photos Function (NX510 series only) .............................. 43

1.7.6 Setup Mode. ................................................................................................ 44

Chapter 2 OPERATING PRINCIPLES

2.1 Overview .............................................................................................................. 49

2.1.1 Printer Mechanism. ..................................................................................... 49

2.1.2 Motors & Sensors . ...................................................................................... 50

2.1.3 Printhead...................................................................................................... 52

2.2 Power-On Sequence ............................................................................................. 53

2.3 Printer Initialization. ............................................................................................ 55

Chapter 3 TROUBLESHOOTING

3.1 Overview .............................................................................................................. 57

3.1.1 Specified Tools ............................................................................................ 57

3.1.2 Preliminary Checks. .................................................................................... 57

3.2 Troubleshooting.................................................................................................... 58

3.2.1 Motor and Sensor Troubleshooting . ........................................................... 58

3.3 Error Indications and Fault Occurrence Causes. ................................................. 59

3.3.1 Error Message List. ..................................................................................... 59

3.3.2 Troubleshooting by Error Message . ........................................................... 62

3.3.3 Superficial Phenomenon-Based Troubleshooting . ..................................... 81

3.4 Network Troubleshooting (NX510 series only) . ................................................. 89

Chapter 4 DISASSEMBLY/ASSEMBLY

4.1 Overview .............................................................................................................. 92

4.1.1 Precautions................................................................................................... 92

4.1.2 Tools ............................................................................................................ 93

4.1.3 Work Completion Check. ........................................................................... 93

4.1.4 Procedural Differences between the Models. ............................................. 95

4.2 Disassembly Procedures. ..................................................................................... 97

4.3 Removing the Housing. ....................................................................................... 98

4.3.1 Paper Support Assy . ................................................................................... 98

4.3.2 Stacker Assy ................................................................................................ 98

4.3.3 Document Cover/ASF Cover. ..................................................................... 99

6

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

4.3.4 Scanner Unit/Hinge . ................................................................................. 100

4.3.5 Upper Housing/Card Slot Cover. .............................................................. 103

4.4 Removing the Circuit Boards . ........................................................................... 105

4.4.1 Main Board Unit . ............................................................................................ 105

4.4.2 Panel Unit/LCD Unit . ..................................................................................... 108

4.4.3 Power Supply Unit. ......................................................................................... 111

4.5 Disassembling the Printer Mechanism . ............................................................. 113

4.5.1 Printhead . ........................................................................................................ 113

4.5.2 CR Scale . ........................................................................................................ 115

4.5.3 Hopper . ........................................................................................................... 116

4.5.4 Removing the Printer Mechanism (Lower Housing)...................................... 117

4.5.5 Left Frame . ..................................................................................................... 119

4.5.6 Front Frame/Right Frame . .............................................................................. 120

4.5.7 Star Wheel Holder Assy ................................................................................. 122

4.5.8 EJ Roller . ........................................................................................................ 122

4.5.9 PF Encoder Sensor. ......................................................................................... 123

4.5.10 PF Scale . ....................................................................................................... 124

4.5.11 PF Motor. ...................................................................................................... 125

4.5.12 CR Motor . ..................................................................................................... 127

4.5.13 Main Frame Assy. ......................................................................................... 128

4.5.14 CR Unit. ........................................................................................................ 131

4.5.15 Upper Paper Guide . ...................................................................................... 132

4.5.16 ASF Unit. ...................................................................................................... 132

4.5.17 Ink System Unit . ........................................................................................... 134

4.5.18 Front Paper Guide. ........................................................................................ 137

4.5.19 PF Roller. ...................................................................................................... 138

4.5.20 Waste Ink Pads . ............................................................................................ 139

4.6 Disassembling the Scanner Unit. ....................................................................... 141

4.6.1 Upper/Front Scanner Housing . ....................................................................... 141

4.6.2 Scanner Carriage Unit. .................................................................................... 142

4.6.3 Scanner Motor Unit ........................................................................................ 144

4.7 Differences in Disassembling/Reassembling SX410 series . ............................. 146

4.7.1 Main Board Unit (SX410 series) .................................................................... 146

4.7.2 Panel Unit/LCD Unit (SX410 series) ............................................................. 148

4.7.3 Printhead (SX410 series) . ............................................................................... 150

4.7.4 Removing the Printer Mechanism (Lower Housing) (SX410 series)............. 152

4.8 Differences in Disassembling/Reassembling SX210 series . ............................. 154

4.8.1 Main Board Unit (SX210 series) . ............................................................. 154

4.8.2 Panel Unit/LCD Unit (SX210 series) ....................................................... 155

4.8.3 Printhead (SX210 series) . ......................................................................... 158

4.8.4 Removing the Printer Mechanism (Lower Housing) (SX210 series)....... 160

Chapter 5 ADJUSTMENT

5.1 Adjustment Items and Overview. ...................................................................... 162

5.1.1 Servicing Adjustment Item List. ............................................................... 162

5.1.2 Required Adjustments . ............................................................................. 165

5.2 Using the Adjustment Program . ........................................................................ 167

5.2.1 TOP Margin Adjustment . ......................................................................... 167

5.2.2 First Dot Position Adjustment . ................................................................. 167

5.2.3 Head Angular Adjustment . ....................................................................... 168

5.2.4 Bi-D Adjustment. ...................................................................................... 169

5.2.5 PF Adjustment ........................................................................................... 170

5.2.6 PF Band Adjustment. ................................................................................ 171

5.2.7 Bottom Margin Adjustment (NX510/SX410 series only). ....................... 172

5.2.8 MAC Address Setting (NX510 series only). ............................................ 173

Chapter 6 MAINTENANCE

6.1 Overview ............................................................................................................ 176

6.1.1 Cleaning..................................................................................................... 176

6.1.2 Service Maintenance. ................................................................................ 176

6.1.3 Lubrication................................................................................................. 177

Chapter 7 APPENDIX

7.1 Exploded Diagram / Parts List . ......................................................................... 183

7

PRODUCT DESCRIPTION

CHAPTER

1

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

CHECK

P O I N T

Notation Product name

NX510 series Epson Stylus NX510/NX515/SX510W/SX515W/TX550W

SX410 series Epson Stylus NX415/SX410/SX415/TX410/TX419

SX210 series

Epson Stylus NX215/SX210/SX215/TX210/TX213/
TX219/ME OFFICE 510

1.1 Features

In this chapter, the product names are called as follows:

This section describes the features of these three models; NX510/SX410/SX210 series.
All the models are color inkjet printers with the scanner function.

 Common features

 Printer

• Printing from a computer or directly printing from a memory card.

• Maximum print resolution: 5760 (H) x 1440 (V) dpi

• Four independent ink cartridges is installed.

• Newly developed pigment ink is employed.

• Borderless printing on specified EPSON brand paper is available.

 Scanner

• Scanning from a computer

 Copy

• Stand alone copy using the scanning and printing functions

 Memory card slot

• Available as USB memory card slot for PC

 Differences of NX510/SX410/SX210 series

The differences between NX510/SX410/SX210 series are described below.

Table 1-1. Differences of NX510/SX410/SX210 series

Item NX510 series SX410 series SX210 series

Printhead

Color LCD

Scanner resolution
(Main scan x Sub scan)

Network interfaces*3Available

USB Host Port

Number of Memory
Card Slots

Scan Function

Note *1 : For the nozzle configuration, see Table 1-3.

*1

O6-chips Turbo II D4-chips Turbo II D2-chips Turbo II

2.5-inch color a-TFT
stripe LCD
(with tilt function)

*2

2.5-inch color a-TFT
stripe LCD
(with tilt function)

1.5-inch color LCD
(Cannot be tilted.)

2400 dpi x 2400 dpi 1200 dpi x 2400 dpi 1200 dpi x 2400 dpi

*4

*5

*6

*7

*2 : For the details of the scanner specifications, see “ 1.3 Scanner Specifications ” (p.20).

*3 : For the details of the network interfaces, see “ 1.5.2 Network Interface (NX510 series

only) ” (p.24).

*4 : Supports both wired network and wireless network.

*5 : Supported devices for NX510 series and SX410 series differ. For the details, see

“ 1.5.1 USB Interface ” (p.23).

*6 : CF Card slot is not mounted on SX210 series. For the details of supported memory

cards, see “ 1.5.3 Memory Card Slots ” (p.26).

*7 : For the details of the functions, see “ 1.7.2 Scan Function (NX510/SX210 series

only) ” (p.36).

Yes Yes No

2 2 1

Yes No Yes

Not Available Not Available

PRODUCT DESCRIPTION Features 9

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

SX410 series

SX210 series

NX510 series

 Dimensions

Table 1-2. Dimensions

NX510 series SX410 series SX210 series

Dimensions

Weight

Note *1 : Paper support and stacker are closed. Rubber feet are excluded

*1

*2

*2 : Excluding the weight of ink cartridges and power cable

450 mm (W) x 342 mm (D) x 182 mm (H)

6.1 kg 5.8 kg 5.7 kg

Figure 1-1. External View

1.2 Printing Specifications

1.2.1 Basic Specifications

Table 1-3. Printer Specifications

Item Specification

Print method On-demand ink jet

NX510 series

Nozzle configuration

Print direction Bi-directional minimum distance printing, Unidirectional printing

Print resolution

Control code

Input buffer size

Paper feed method Friction feed, using the ASF (Auto Sheet Feeder)

Paper path Top feed, front out

Paper feed rates
(at 25.4 mm feed)

PF interval Programmable in 0.01764 mm (1/1440 inch) steps

SX410 series

SX210 series

Horizontal x Vertical (dpi)

• 360 x 120 • 1440 x 720

• 360 x 360 • 1440 x 1440*1

• 360 x 720 • 5760 x 1440

• 720 x 720

• ESC/P Raster command

• ESC/P-R (RGB) command

• EPSON Remote command

NX510 series 132 Kbytes

SX410 series

SX210 series

NX510 series

SX410 series

SX210 series TBD

Black: 128 nozzles x 3
Color: 128 nozzles x 3 (Cyan, Magenta, Yellow)

Black: 90 nozzles x 1
Color: 90 nozzles x 3 (Cyan, Magenta, Yellow)

Black: 29 nozzles x 1
Color: 29 nozzles x 3 (Cyan, Magenta, Yellow)

64 Kbytes

95 msec. (Draft 16 ips*2), 113 msec. (Default 12 ips*2)

Note *1 : SX410 series only

*2 : ips = inch per second

PRODUCT DESCRIPTION Printing Specifications 10

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

C A U T I O N

1.2.2 Ink Cartridge

Specifications for the ink cartridges for each series are explained below.

Table 1-4. Cartridge types for NX510 series

Color EAI Latin Euro CISMEA/Asia

T0971 (L2)

Black

Cyan

Magenta

Yellow

T0681 (S)
T0691 (2S)

T0682 (2S)
T0692 (3S)

T0683 (2S)
T0693 (3S)

T0684 (2S)
T0694 (3S)

T1031 (L1)

T1032 (S)

T1033 (S)

T1034 (S)

Table 1-5. Cartridge types for SX410 series

Color EAI Latin Euro CISMEA/Asia

Black

Cyan

Magenta

Yellow

T0681 (S)
T0691 (2S)
T0881 (3S)

T0692 (3S)
T0882 (4S)

T0693 (3S)
T0883 (4S)

T0694 (3S)
T0884 (4S)

T0731HN (S)
T0731N (2S)

T0732N (3S)

T0733N (3S)

T0734N (3S)

T1001 (L1)
T0711H (S)
T0711 (2S)

T1002 (S)
T0712 (3S)

T1003 (S)
T0713 (3S)

T1004 (S)
T0714 (3S)

T0711H (S)
T0711 (2S)
T0891 (3S)

T0712 (3S)
T0892 (4S)

T0713 (3S)
T0893 (4S)

T0714 (3S)
T0894 (4S)

T1031 (L1)
T0731HN (S)
T0731N (2S)

T1032 (S)
T0732N (3S)

T1033 (S)
T0733N (3S)

T1034 (S)
T0734N (3S)

T0731HN (S)
T0731N (2S)

T0732N (3S)

T0733N (3S)

T0734N (3S)

 Shelf life

Two years from production date (if unopened), six months after opening package.

 Storage Temperature

Table 1-7. Storage Temperature

Situation Storage Temperature Limit

When stored in individual boxes

When installed in main unit

-20 oC to 40 oC
(-4oF to 104oF)

-20 oC to 40 oC

(-4oF to 104oF)

1 month max. at 40 oC (104oF)

 Dimension

12.7 mm (W) x 68 mm (D) x 47 mm (H)



Do not use expired ink cartridges.

 The ink in the ink cartridge freezes at -16 °C (3.2 oF). It takes

about three hours under 25 °C (77oF) until the ink thaws and
becomes usable.

Table 1-6. Cartridge types for SX210 series

Color EAI Latin Euro CISMEA/Asia ECC/EHK

Black

Cyan

Magenta

Yellow

T0681 (S)
T0691 (2S)
T0881 (3S

T0692 (3S)
T0882 (4S)

T0693 (3S)
T0883 (4S)

T0694 (3S)
T0884 (4S)

)

T0731HN (S)
T0731N (2S)

T0732N (3S)

T0733N (3S)

T0734N (3S)

T0711H (S)
T0711 (2S)
T0891 (3S)

T0712 (3S)
T0892 (4S)

T0713 (3S)
T0893 (4S)

T0714 (3S)
T0894 (4S)

T0731HN (S)
T0731N (2S)

T0732N (3S) T1092 (2S)

T0733N (3S) T1093 (2S)

T0734N (3S) T1094 (2S)

T1091 (2S)

PRODUCT DESCRIPTION Printing Specifications 11

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

1.2.3 Print Mode

 NX510 series

Table 1-8. Print Mode for NX510 series (Color)

Media Print Mode

• Plain paper

• Premium Bright
White Paper (EAI)

• Premium Bright
White Inkjet Paper
(others)

• Ultra Premium
Glossy Photo Paper
(EAI)

• Ultra Glossy Photo
Paper (others)

• Photo Paper Glossy
(EAI)

• Glossy Photo Paper
(others)

• Premium Photo
Paper Glossy (EAI)

• Premium Glossy
Photo Paper (others)

• Premium Photo
Paper Semi-Gloss
(EAI)

• Premium Semigloss
Photo Paper (other)

Resolution

(H x V dpi)

Draft 1 /

Draft 2

Normal 2 360x360

Fine 2 360x720

Photo 1 720x720

Best Photo 1440x720

Fine 1 360x720

Best Photo 1440x720

Draft 2 360x120

Fine 1 360x720

360x120

Dot Size

(cps)

Eco

(400cps)

VSD1

(300cps)

VSD2

(300cps)

VSD3

(285cps)

VSD3

(285cps)

VSD1

(300cps)

VSD3

(285cps)

Eco

(400cps)

VSD1

(300cps)

Micro

Bi-d

Weave

ON OFF N/A

ON OFF N/A

ON ON N/A

ON ON N/A

ON ON OK

ON ON OK

ON ON OK

ON OFF N/A

ON ON OK

Border-

less

Table 1-8. Print Mode for NX510 series (Color)

Media Print Mode

Photo Paper* (other)

• Premium
Presentation Paper
Matte (EAI)

• Matte Paper Heavy­weight (others)

• Photo Quality Inkjet
Paper* (others)

Envelope

Note* : Not supported in EAI.

Resolution

(H x V dpi)

Fine 1 360x720

Best Photo 1440x720

Photo 2 720x720

Best Photo 1440x720

Photo 2 720x720

Best Photo 1440x720

Normal 2 360x360

Fine 2 360x720

Dot Size

(cps)

VSD1

(300cps)

VSD3

(285cps)

VSD2

(285cps)

VSD3

(285cps)

VSD2

(285cps)

VSD3

(285cps)

VSD1

(300cps)

VSD2

(300cps)

Micro

Bi-d

Weave

ON ON OK

ON ON OK

ON ON

ON ON

ON ON

ON ON

OFF OFF

OFF ON

Border-

less

OK

OK

N/A

N/A

N/A

N/A

Best Photo 1440x720

VSD3

(285cps)

ON ON OK

PRODUCT DESCRIPTION Printing Specifications 12

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

Table 1-9. Print Mode for NX510 series (Monochrome)

Media Print Mode

• Plain paper

• Premium Bright
White Paper (EAI)

• Premium Ink Jet
Plain papers (others)

• Ultra Premium
Glossy Photo Paper
(EAI)

• Ultra Glossy Photo
Paper (others)

• Photo Paper Glossy
(EAI)

• Glossy Photo Paper
(others)

• Premium Photo
Paper Glossy (EAI)

• Premium Glossy
Photo Paper (others)

• Premium Photo
Paper Semi-Gloss
(EAI)

• Premium Semigloss
Photo Paper (other)

Resolution

(H x V dpi)

Draft 3 /

Draft 4

Normal 1 360x360

Fine 2 360x720

Photo 1 720x720

Best Photo 1440x720

Fine 1 360x720

Best Photo 1440x720

Draft 4 360x360

Fine 1 360x720

360x360

Dot Size

(cps)

Eco

(400cps)

VSD1

(300cps)

VSD2

(300cps)

VSD3

(285cps)

VSD3

(285cps)

VSD1

(300cps)

VSD3

(285cps)

Eco

(400cps)

VSD1

(300cps)

Micro

Bi-d

Weave

ON OFF N/A

ON OFF N/A

ON ON N/A

ON ON N/A

ON ON OK

ON ON OK

ON ON OK

ON OFF N/A

ON ON OK

Border-

less

Table 1-9. Print Mode for NX510 series (Monochrome)

Media Print Mode

• Premium
Presentation Paper
Matte (EAI)

• Matte Paper Heavy­weight (others)

• Photo Quality Inkjet
Paper* (others)

Envelope

Note* : Not supported in EAI.

Resolution

(H x V dpi)

Photo 2 720x720

Best Photo 1440x720

Photo 2 720x720

Best Photo 1440x720

Normal 1 360x360

Fine 2 360x720

Dot Size

(cps)

VSD2

(285cps)

VSD3

(285cps)

VSD2

(285cps)

VSD3

(285cps)

VSD1

(300cps)

VSD2

(300cps)

Micro

Bi-d

Weave

ON ON OK

ON ON OK

ON ON N/A

ON ON N/A

OFF OFF N/A

OFF ON N/A

Border-

less

Best Photo 1440x720

Fine 1 360x720

Photo Paper* (other)

Best Photo 1440x720

VSD3

(285cps)

VSD1

(300cps)

VSD3

(285cps)

ON ON OK

ON ON OK

ON ON OK

PRODUCT DESCRIPTION Printing Specifications 13

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

 SX410 series

Media Print Mode

• Plain paper

• Premium Bright
White Paper (EAI)

• Premium Bright
White Inkjet Paper
(others)

• Ultra Premium
Glossy Photo Paper
(EAI)

• Ultra Glossy Photo
Paper (others)

• Photo Paper Glossy
(EAI)

• Glossy Photo Paper
(others)

• Premium Photo
Paper Glossy (EAI)

• Premium Glossy
Photo Paper (others)

• Premium Photo
Paper Semi-Gloss
(EAI)

• Premium Semigloss
Photo Paper (other)

Table 1-10. Print Mode for SX410 series (Color)

Resolution

(H x V dpi)

Fast Economy

/ Economy

Draft 360x120

Normal 360x360

Fine (360) 360x720

Fine (720) 720x720

Photo (1440) 1440x720

Photo 2 (1440) 1440x1440

Photo (5760) 5760x1440

Photo Draft 360x720

Photo (720) 720x720

Photo (1440) 1440x720

Photo 2 (1440) 1440x1440

Photo (5760) 5760x1440

360x120

Dot Size

(cps)

Eco

(400cps)

Eco

(400cps)

VSD1

(245cps)

VSD2

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD1

(245cps)

VSD2

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD3

(285cps)

Bi-d

ON OFF N/A

ON OFF N/A

ON OFF N/A

ON ON N/A

ON ON N/A

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON OK

Micro
Weave

Border-

less

Table 1-10. Print Mode for SX410 series (Color)

Media Print Mode

Photo Draft 360x720

Photo Paper* (other)

• Premium
Presentation Paper
Matte (EAI)

• Matte Paper Heavy­weight (others)

• Photo Quality Inkjet
Paper (others)

Envelope

Note* : Supports printing using the printer driver only.

Photo (720) 720x720

Photo (1440) 1440x720

Photo (720) 720x720

Photo (1440) 1440x720

Photo (720) 720x720

Photo (1440) 1440x720

Normal 360x360

Fine (720) 720x720

Resolution

(H x V dpi)

Dot Size

(cps)

VSD1

(245cps)

VSD2

(285cps)

VSD3

(285cps)

VSD2

(285cps)

VSD3

(285cps)

VSD2

(285cps)

VSD3

(285cps)

VSD1

(245cps)

VSD3

(285cps)

Micro

Bi-d

Weave

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON

ON ON

OFF OFF N/A

OFF ON

Border-

less

N/A

N/A

N/A

PRODUCT DESCRIPTION Printing Specifications 14

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

Table 1-11. Print Mode for SX410 series (Monochrome)

Media Print Mode

• Plain paper

• Premium Bright
White Paper (EAI)

• Premium Bright
White Inkjet Paper
(others)

• Ultra Premium
Glossy Photo Paper
(EAI)

• Ultra Glossy Photo
Paper (others)

• Photo Paper Glossy
(EAI)

• Glossy Photo Paper
(others)

• Premium Photo
Paper Glossy (EAI)

• Premium Glossy
Photo Paper (others)

• Premium Photo
Paper Semi-Gloss
(EAI)

• Premium Semigloss
Photo Paper (other)

Resolution

(H x V dpi)

Fast Economy

/ Economy

Draft 360x120

Normal 360x360

Fine (360) 360x720

Fine (720) 720x720

Photo (1440) 1440x720

Photo 2 (1440) 1440x1440

Photo (5760) 5760x1440

Photo Draft 360x720

Photo (720) 720x720

Photo (1440) 1440x720

Photo 2 (1440) 1440x1440

Photo (5760) 5760x1440

360x120

Dot Size

(cps)

Eco

(400cps)

Eco

(400cps)

VSD1

(245cps)

VSD2

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD1

(245cps)

VSD2

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD3

(285cps)

Micro

Bi-d

Weave

ON OFF N/A

ON OFF N/A

ON OFF N/A

ON ON N/A

ON ON N/A

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON OK

Border-

less

Table 1-11. Print Mode for SX410 series (Monochrome)

Media Print Mode

Photo Draft 360x720

Photo Paper* (other)

• Premium
Presentation Paper
Matte (EAI)

• Matte Paper Heavy­weight (others)

• Photo Quality Inkjet
Paper (others)

Envelope

Note* : Supports printing using the printer driver only.

Photo (720) 720x720

Photo (1440) 1440x720

Photo (720) 720x720

Photo (1440) 1440x720

Photo (720) 720x720

Photo (1440) 1440x720

Normal 360x360

Fine (720) 720x720

Resolution

(H x V dpi)

Dot Size

(cps)

VSD1

(245cps)

VSD2

(285cps)

VSD3

(285cps)

VSD2

(285cps)

VSD3

(285cps)

VSD2

(285cps)

VSD3

(285cps)

VSD1

(245cps)

VSD3

(285cps)

Micro

Bi-d

Weave

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON OK

ON ON

ON ON

OFF OFF N/A

OFF ON

Border-

less

N/A

N/A

N/A

PRODUCT DESCRIPTION Printing Specifications 15

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

 SX210 series

Media Print Mode

• Plain paper

• Premium Bright
White Paper (EAI)

• Premium Bright
White Inkjet Paper
(others)

• Ultra Premium
Glossy Photo Paper
(EAI)

• Ultra Glossy Photo
Paper (others)

• Photo Paper Glossy
(EAI)

• Glossy Photo Paper
(others)

• Premium Photo
Paper Glossy (EAI)

• Premium Glossy
Photo Paper (others)

• Premium Photo
Paper Semi-Gloss
(EAI)

• Premium Semigloss
Photo Paper (other)

Table 1-12. Print Mode for SX210 series (Color)

Resolution

(H x V dpi)

Fast Economy

/ Economy

Normal 360x360

Fine 360x720

Photo 720x720

Best Photo 1440x720

Photo RPM 5760x1440

Super Fine 360x720

Photo 720x720

Best Photo 1440x720

Photo RPM 5760x1440

360x120

Dot Size

(cps)

Eco

(400cps)

VSD1

(245cps)

VSD2

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD2

(285cps)

VSD2

(285cps)

VSD3

(285cps)

VSD3

(285cps)

Bi-d

ON OFF N/A

ON OFF N/A

ON ON N/A

ON ON OK

ON ON OK

ON ON N/A

ON ON N/A

ON ON OK

ON ON OK

ON ON N/A

Micro
Weave

Border-

less

Table 1-12. Print Mode for SX210 series (Color)

Media Print Mode

• Premium
Presentation Paper
Matte (EAI)

• Matte Paper Heavy­weight (others)

Envelope

Note* : Not supported in EAI.

Resolution

(H x V dpi)

Photo 720x720

Best Photo 1440x720

Normal 360x360

Fine 360x720

Dot Size

(cps)

VSD2

(285cps)

VSD3

(285cps)

VSD1

(245cps)

VSD2

(285cps)

Micro

Bi-d

Weave

ON ON

ON ON

OFF OFF

OFF ON

Border-

less

OK

OK

N/A

N/A

VSD2

(285cps)

VSD2

(285cps)

VSD3

(285cps)

ON ON N/A

ON ON OK

ON ON OK

Photo Paper* (other)

Super Fine 360x720

Photo 720x720

Best Photo 1440x720

PRODUCT DESCRIPTION Printing Specifications 16

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

Table 1-13. Print Mode for SX210 series (Monochrome)

Media Print Mode

• Plain paper

• Premium Bright
White Paper (EAI)

• Premium Bright
White Inkjet Paper
(others)

• Ultra Premium
Glossy Photo Paper
(EAI)

• Ultra Glossy Photo
Paper (others)

• Photo Paper Glossy
(EAI)

• Glossy Photo Paper
(others)

• Premium Photo
Paper Glossy (EAI)

• Premium Glossy
Photo Paper (others)

• Premium Photo
Paper Semi-Gloss
(EAI)

• Premium Semigloss
Photo Paper (other)

Resolution

(H x V dpi)

Fast Economy

/ Economy

Normal 360x360

Fine 360x720

Photo 720x720

Best Photo 1440x720

Photo RPM 5760x1440

Super Fine 360x720

Photo 720x720

Best Photo 1440x720

Photo RPM 5760x1440

360x120

Dot Size

(cps)

Eco

(400cps)

VSD1

(245cps)

VSD2

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD3

(285cps)

VSD2

(285cps)

VSD2

(285cps)

VSD3

(285cps)

VSD3

(285cps)

Micro

Bi-d

Weave

ON OFF N/A

ON OFF N/A

ON ON N/A

ON ON OK

ON ON OK

ON ON N/A

ON ON N/A

ON ON OK

ON ON OK

ON ON N/A

Border-

less

Table 1-13. Print Mode for SX210 series (Monochrome)

Media Print Mode

• Premium
Presentation Paper
Matte (EAI)

• Matte Paper Heavy­weight (others)

Envelope

Note* : Not supported in EAI.

Resolution

(H x V dpi)

Photo 720x720

Best Photo 1440x720

Normal 360x360

Fine 360x720

Dot Size

(cps)

VSD2

(285cps)

VSD3

(285cps)

VSD1

(245cps)

VSD2

(285cps)

Micro

Bi-d

Weave

ON ON

ON ON

OFF OFF

OFF ON

Border-

less

OK

OK

N/A

N/A

VSD2

(285cps)

VSD2

(285cps)

VSD3

(285cps)

ON ON N/A

ON ON OK

ON ON OK

Photo Paper* (other)

Super Fine 360x720

Photo 720x720

Best Photo 1440x720

PRODUCT DESCRIPTION Printing Specifications 17

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

1.2.4 Supported Paper

The table below lists the paper type and sizes supported by the printer. The supported paper type and sizes vary depending on destinations (between EAI, EUR, and Asia).

Table 1-14. Supported Paper

Paper Name Paper Size

Thickness

(mm)

Legal 215.9 x 355.6 mm (8.5”x14”)

Letter 215.9 x 279.4 mm (8.5”x11”) Y - Y - Y -

A4 210 x 297 mm (8.3”x11.7”) Y - Y - Y -

B5 182 x 257 mm (7.2”x10.1”) - - Y - Y -

Plain paper

A5 148 x 210 mm (5.8”x8.3”) - - Y - Y -

0.08-0.11

Half Letter 139.7 x 215.9 mm (5.5"x8.5”) Y - - - - -

A6 105 x 148 mm (4.2”x5.8”) Y - Y - Y -

User Defined

89 x 127- 329 x 1117.6 mm
(3.56”x 5.08” - 13.16”x44.7”)

Premium Inkjet Plain Paper A4 210 x 297 mm (8.3”x11.7”) 0.11

Premium Bright White Paper (EAI)
Bright White Inkjet Paper (Euro, Asia)

Letter 215.9 x 279.4 mm (8.5”x11”) 0.11

A4 210 x 297 mm (8.3”x11.7”) 0.13

Letter 215.9 x 279.4 mm (8.5”x11”)

A4 210 x 297 mm (8.3”x11.7”) - - Y Y Y Y
Ultra Premium Glossy Photo Paper (EAI)
Ultra Glossy Photo Paper (Euro, Asia)

8” x 10” 203.2 x 254 mm Y Y - - - -

0.30

5” x 7” 127 x 178 mm Y Y Y Y - -

4” x 6” 101.6 x 152.4 mm Y Y Y Y Y Y

Letter 215.9 x 279.4 mm (8.5”x11”)

A4 210 x 297 mm (8.3”x11.7”) - - Y Y Y Y

Premium Photo Paper Glossy (EAI)
Premium Glossy Photo Paper (Euro, Asia)

8” x 10” 203.2 x 254 mm Y Y - - - -

0.27

5” x 7” 127 x 178 mm Y Y Y Y Y Y

4" x 6

"

101.6 x 152.4 mm Y Y Y Y Y Y

16:9 wide 101.6 x 180.6 mm Y Y Y Y - -

Weight

64-90 g/m

(17-24 lb.)

80 g/m

(21 lb.)

90 g/m

(24 lb.)

92.5 g/m
(25 lb.)

290 g/m

(77 lb.)

255 g/m

(68 lb.)

2

2

2

2

2

2

EAI EUR Asia

*1

*2

*1

*2

P

B

P

B

*1

P

Y - Y - Y -

Y - Y - Y -

- - Y - Y -

Y - - - - -

- - Y - Y -

Y Y - - - -

Y Y - - - -

*2

B

PRODUCT DESCRIPTION Printing Specifications 18

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

Note *1 : “Y” in the “P” column stands for “the paper type/size is Supported”.

*2 : “Y” in the “B” column stands for “Borderless printing is available”.

C A U T I O N

 Make sure the paper is not wrinkled, fluffed, torn, or folded.
 Make sure to correct the warpage of the paper before use.
 When printing on an envelope, be sure the flap is folded neatly.
 Do not use the adhesive envelopes.
 Do not use double envelopes and cellophane window envelopes.

Table 1-14. Supported Paper

Paper Name Paper Size

Thickness

(mm)

Letter 215.9 x 279.4 mm (8.5”x11”)

Photo Paper Glossy (EAI)
Glossy Photo Paper (Euro, Asia)

A4 210 x 297 mm (8.3”x11.7”) Y Y Y Y Y Y

0.25

5” x 7” 127 x 178 mm - - Y Y - -

4” x 6” 101.6 x 152.4 mm Y Y Y Y Y Y

Letter 215.9 x 279.4 mm (8.5”x11”)
Premium Photo Paper Semi-Gloss (EAI)
Premium Semigloss Photo Paper (Euro, Asia)

A4 210 x 297 mm (8.3”x11.7”) - - Y Y Y Y

0.27

4” x 6” 101.6 x 152.4 mm Y Y Y Y Y Y

Letter 215.9 x 279.4 mm (8.5”x11”)
Premium Presentation Paper Matte (EAI)
Matte Paper-Heavyweight (Euro, Asia)

A4 210 x 297 mm (8.3”x11.7”) - - Y Y Y Y

0.23

8” x 10” 203.2 x 254 mm Y Y - - - -

Photo Quality Inkjet Paper A4 210 x 297 mm (8.3”x11.7”) 0.13

#10 104.8 x 241.3 mm (4.125”x9.5”)

Envelopes

#DL 110 x 220 mm - - Y - Y -

-

#C6 114 x 162 mm - - Y - Y -

A4 210 x 297 mm (8.3”x11.7”)

Photo Paper

5” x 7” 127 x 178 mm - - Y Y - -

0.24

4” x 6” 101.6 x 152.4 mm - - Y Y Y Y

Weight

258 g/m

(68 lb.)

250 g/m

(66 lb.)

167 g/m

(44 lb.)

102 g/m

(27 lb.)

75-100 g/m

(20-27 lb.)

190 g/m

(51 lb.)

2

2

2

2

2

2

EAI EUR Asia

*1

*2

*1

*2

P

B

P

B

*1

P

Y Y - - - -

Y Y - - - -

Y Y - - - -

- - Y - Y -

Y - Y - Y -

- - Y Y Y Y

B

*2

PRODUCT DESCRIPTION Printing Specifications 19

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

Print Area

LM RM

TM

BM

BM

Cut Sheet (Standard) Cut Sheet (Borderless)

Paper SIze

LM RM

TM

BM

Print Area

LM RM

Print Area

Envelope

Paper Size

TM

Paper Feed Direction

1.2.5 Printing Area

The printing area for this printer is shown below.

Table 1-15. Printing Area (Margins)

Print Mode Paper Size

Standard print

Borderless

*

print

Note * : The margins for Borderless print are margins that bleed off the edges of paper.

Any size 3 mm 3 mm 3 mm 3 mm

Envelope 5 mm 5 mm 3 mm 20 mm

NX510
series

SX410
series

SX210
series

4” x 6”

Others 2.96 mm

A4/Letter to 2L/
5” x 7”/16” x 9”

4” x 6” 2.54 mm 3.53 mm

A4/Letter to 2L/
5” x 7”/16” x 9”

4” x 6” 2.82 mm

Left Right Top Bottom

2.54 mm 2.54 mm

2.54 mm 2.54 mm

2.54 mm 2.54 mm

Margin

2.8 mm

2.96 mm 4.02 mm

2.96 mm

3.39 mm

3.39 mm

1.3 Scanner Specifications

Table 1-16. Basic Specifications

Item Specification

Scanner type Flatbed, color

Scanning method Moving carriage, stationary document

Home position The front right corner

Photoelectric device CIS

Light source LED

Maximum document sizes A4 or US letter

Scanning range 8.5" x 11.7" (216 mm x 297 mm)

Main scan: 2400 dpi
Sub scan: 2400 dpi

Main scan: 1200 dpi
Sub scan: 2400 dpi

10,200 x 14,040 pixels

24 bit per pixel (output).

1 bit* / 8 bit per pixel (output)

Maximum resolution

Maximum effective pixels

Pixel depth

NX510 series

SX210 series

SX410 series

NX510 series 20,400 x 28,800 pixels

SX410 series

SX210 series

Color: 48 bit per pixel (input) and

Monochrome: 16 bit per pixel (input) and

Figure 1-2. Printing Area

PRODUCT DESCRIPTION Scanner Specifications 20

Note * : NX510 series only.

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

a

RW

RL

OTM

OLM

Scanning starting position

Scan area

Scan bed

Original

(facedown)

Home position

1.3.1 Scanning Range

Table 1-17. Scanning Range

RL (read length) RW (read width) OLM (left margin) OTM (top margin)

216 mm 297 mm 1.5 mm 1.5 mm

Figure 1-3. Scanning Range

1.4 General Specifications

1.4.1 Electrical Specifications

Table 1-18. Primary Power Specifications

Item 100-120 V model 220-240 V model

Rated power supply voltage 100 to 120 VAC 220 to 240 VAC

Input voltage range 90 to 132 VAC 198 to 264 VAC

NX510 series 0.6 A (1.3 A) 0.3 A (0.6 A)
Rated current
(Max. rated current)

Rated frequency 50 to 60 Hz

Input frequency range 49.5 to 60.5 Hz

Insulation resistance
(Primary - Secondary, 10 mA at 25 oC)

Energy conservation

Power consumption

Note* : Printing pattern: ISO/IEC24712

Note : When no operation is made with the control panel for more than 13 minutes, the panel

goes to the power save mode within two minutes.

SX410 series

SX210 series

NX510 series

SX410 series

SX210 series

0.6 A (1.0 A) 0.3 A (0.5 A)

3,000 V (for one minute)

International Energy Star Program compliant

Copy* Approx. 16 W Approx. 16 W

Ready Approx. 6.0 W Approx. 6.0 W

Sleep Approx. 3.5 W Approx. 4.0 W

Off Approx. 0.2 W Approx. 0.3 W

*

Copy

Ready Approx. 5.0 W Approx. 5.0 W

Sleep Approx. 2.5 W Approx. 3.0 W

Off Approx. 0.2 W Approx. 0.3 W

Copy

Ready Approx. 5.0 W Approx. 5.0 W

Sleep Approx. 2.5 W Approx. 2.5 W

Off Approx. 0.2 W Approx. 0.3W

Approx. 12 W Approx. 12 W

*

Approx. 11 W Approx. 11 W

PRODUCT DESCRIPTION General Specifications 21

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

CAUTION

10/50

27/80

35/9520/68

Temperature (°C/°F)

20

30

40

50

90

80

70

60

Humidity (%)

30/86 40/104

1.4.2 Environmental Conditions

Table 1-19. Environmental Conditions

*3

*1

Humidity

20 to 80%

Condition Temperature

Operating

Storage

(unpacked)

10 to 35°C

(50 to 95°F)

-20 to 40°C

(-4°F to 104°F)

Note *1 : The combined Temperature and Humidity conditions must be within the blue-shaded

range in Fig.1-4.

*2 : No condensation

*3 : Must be less than 1 month at 40°C.

5 to 85%

*1,2

Shock Vibration

1G

(1 msec or less)

10 to 55Hz

2G

(2 msec or less)

10 to 55Hz

0.15G,

0.50G,

1.4.3 Durability

Table 1-20. Durability

Model Total print life

Black 20,000 pages

NX510 series

(TBD)

Color 10,000 pages

*1

*2

Four billions shots

*3

(per nozzle) (TBD)

Printhead

(TBD)

SX410 series

SX210 series

Black 10,000 pages
Color 10,000 pages

*2

Five billions shots

*3

(per nozzle)

Note *1 : The specified value or five years whichever comes first

*2 : A4, 3.5% duty, ECMA pattern, Plain paper, Default mode

*3 : A4, ISO 24712 pattern, Plain paper, Default mode

1.4.4 Acoustic Noise

 NX510 series: 42.5 dB

 SX410 series: 41 dB

 SX210 series: 37.7 dB

Note : When printing from PC, on Premium Glossy Photo Paper, in highest quality

*1

Scanner carriage

30,000 cycles of
carriage movement

(TBD)

30,000 cycles of
carriage movement

Figure 1-4. Temperature/Humidity Range

 When returning the repaired printer to the customer, make sure

the Printhead is covered with the cap and the ink cartridge is
installed.

 If the Printhead is not covered with the cap when the printer is

off, turn on the printer with the ink cartridge installed, make
sure the Printhead is covered with the cap, and then turn the
printer off.

PRODUCT DESCRIPTION General Specifications 22

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

1.4.5 Safety Approvals (Safety standards/EMI)

USA UL60950-1

FCC Part15 Subpart B Class B

Canada CSA No.60950-1

CAN/CSA-CEI/IEC CISPR 22 Class B
Mexico NOM-019-SCFI-1998
Taiwan CNS13438 Class B

CNS14336 (IEC60950)
EU EN60950-1

EN55022 Class B

EN61000-3-2, EN61000-3-3

EN55024
Russia GOST-R (IEC60950, CISPR 22)
Korea K60950-1

KN22 Class B

KN61000-4-2/-3/-4/-5/-6/-11
Argentina IEC60950-1
Australia AS/NZS CISPR22 Class B

Singapore

Hong Kong

China

Note *1 : SX410 series is not compliant.

*1

*1

*1*2

IEC60950-1

IEC60950-1

GB8898

GB13837 Class B, GB17625.1

*2 : NX510 series is not compliant.

1.5 Interface

This printer has USB interface and memory card slots of the following specifications.

1.5.1 USB Interface

The mounted USB Interfaces differ between NX510/SX410/SX210 series. These
products are equipped with the USB Device Port to connect a computer. Moreover,
NX510/SX410 series are equipped with the USB Host Port to connect an external
device such as a DSC (Digital Still Camera), etc. The specifications of each USB port
are provided below.

Table 1-21. USB Interface Specifications

Item USB Device port USB Host port

• Universal Serial Bus
Specifications Revision 2.0

• Universal Serial Bus Device

Compatible standards

Transfer rate

NX510 series

SX410 series

Class Definition for Printing
Devices Version 1.1

• Universal Serial Bus Mass
Storage Class Bulk-Only
Transport Revision 1.0

480 Mbps (High Speed)

Data format

Compatible connector

Max. cable length

Note* : The following devices can be connected to the USB Host port. (Not supported for

SX210 series)

• Devices compliant with DPS Version 1.0/1.1 (PictBridge)

• Devices compliant with Universal Serial Bus Mass Storage Class Bulk-Only Transport
Revision 1.0, and the Subclass code is one of the followings. (NX510 series only)
0x06 (SCSI transparent command set)
0x05 (SFF-8070i command set)
0x02 (SFF-8020i command set)

USB Series B USB Series A

2 [m] or less

• Universal Serial Bus
Specifications Revision

2.0

480 Mbps (MAX)

12 Mbps (MAX)

NRZI

*

PRODUCT DESCRIPTION Interface 23

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

Table 1-22. Device ID

When IEEE 1284.4 is Enabled When IEEE 1284.4 is Disabled

@EJL<SP>ID<CR><LF>
MFG:EPSON;
CMD:ESCPL2,BDC,D4,D4PX,ESCPR1;
MDL:Model Name;
CLS:PRINTER;
DES:EPSON<SP>Model Name;
CID:EpsonRGB;

The “Model Name” is replaced as shown in the following table.

Table 1-23. Model Names Indicated in the Device ID

Destination North America Euro

NX510 series

SX410 series TBD TBD TBD ---

SX210 series

Epson Stylus

NX510

Epson Stylus

NX210

Epson Stylus

Epson Stylus

@EJL<SP>ID<CR><LF>
MFG:EPSON;
CMD:ESCPL2,BDC;ESCPR1;
MDL:Model Name;
CLS:PRINTER;
DES:EPSON<SP>Model Name;
CID:EpsonRGB;

Latin/Asia/

Pacific

Epson Stylus

SX510W

SX210

TX510W

Epson Stylus

TX210

OFFICE 510

China

---

Epson ME

1.5.2 Network Interface (NX510 series only)

NX510 series can be connected to the network via Wired or Wireless LAN connection.
(They can not be used simultaneously.) The following describes each Interface.

 Wired LAN

The following interface is equipped for the Wired LAN connection. The
communication mode can be selected from auto setting or fixed setting.

Table 1-24. Wired LAN

Item Content

Connector RJ-45 receptacle*: 1 port

Communication Speed For either 10Base-T or 100Base-TX, the Full Duplex or Half

Duplex can be selected.

Note* : 10Base-T/100Base-TX Ethernet is supported. MDI/MDI-X is selected automatically.

Table 1-25. Combination of the Wired LAN communication mode settings

Setting of this printer Setting of the connected device

Auto Setting (AUTO)

Auto Setting

100BASE-TX Full Duplex 100BASE-TX Full Duplex

100BASE-TX Half Duplex

10BASE-T Full Duplex 10BASE-T Full Duplex

10BASE-T Half Duplex

100BASE-TX Half Duplex

10BASE-T Half Duplex

Auto Setting (AUTO)

100BASE-TX Half Duplex

Auto Setting (AUTO)

10BASE-T Half Duplex

PRODUCT DESCRIPTION Interface 24

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

CHECK

P O I N T

 Wireless LAN

The following interface is equipped for the Wireless LAN connection.

:

Table 1-26. Wireless LAN

Item Content

Applied Standard
(2.4GHz spectrum band
wireless network
standards)

Wireless Operation Mode IEEE802.11b DS-SS (Half Duplex)

Communication Range
(line-of-sight distance)

Communication Mode Ad-hoc (IBSS) or Infrastructure (ESS)

Roaming Function Not supported

Output Signal Intensity 10mW

Antenna Built-in antenna (Diversity function is not supported)

Note " * " : Referential value. It depends on surrounding conditions.

Conforms to IEEE802.11b, IEEE802.11g

IEEE802.11g OFDM (Half Duplex)

IEEE802.11b (11Mbps) • 60m (indoor)

*

• 220m (outdoor)

IEEE802.11g (54Mbps) • 20m (indoor)

• 100m (outdoor)

 Switching Wired/Wireless LAN

This printer can be connect to the network via either Wired LAN or Wireless LAN
connection only.

Enabling/disabling the Wireless LAN can be made from the Control Panel. When the
Wireless LAN is enabled, it gets priority over the Wired Lan regardless of whether the
LAN Cable is connected. The default Wireless LAN setting is “Disabled”.

Table 1-28. Wireless LAN Setting from the Control Panel

Setting from Control Panel

Wireless LAN Disabled

(Default)

Enabled

Note* : No service via network is available without connecting the LAN Cable (because

network communication is not established.) except printing a status sheet or the like.

LAN Cable Connection State

Connected Disconnected

Wired LAN ---

Wireless LAN

*

Wireless LAN

When changing the networks while the power is on, wait at least for
10 seconds between disconnecting and reconnecting.

Table 1-27. Available Channels and Standard

Frequency Band

(GHz)

Channel IEEE Standard

2.400 - 2.4835 1 - 13 802.11b 11/5.5/2/1M

2.400 - 2.4835 1 - 13 802.11g 54/48/36/24/18/12/9/6M

2.471 - 2.497 14 802.11/11b 11/5.5/2/1M

Note " * " : The communication speed will be changed automatically, depending on radio wave

strength. bps = bit per second.

PRODUCT DESCRIPTION Interface 25

Communication Speed

*

(bps)

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

CAUTION

1.5.3 Memory Card Slots

If you insert a Memory Stick DUO to the Memory Card Slot
without using the adapter, make sure to turn off the printer first,
then remove the card using tweezers.

Table 1-29. List of Supported Memory Card

Priority

1

2

3

4

Note: • Memory Stick/PRO, SD/MMC and xD-Picture Card shares the same slot.

Slot Compatible memory card Standard Max. capacity Remarks

Memory Stick/
Memory Stick
PRO

SD/MMC SD (Security Digital) SD Memory Card Specifications / PART1. Physical Layer Specification

xD-Picture card xD-Picture card xD-Picture Card Specification Ver.1.20 compatible

CF Type II
(No slot provided
for SX210 series)

Memory Stick “Memory Stick Standard” Format Specification Ver.1.43-00 compatible 128MB Includes versions with memory select function

MagicGate Memory Stick Copy protection function is not supported

MagicGate Memory Stick Duo An adapter should be used

Memory Stick PRO Memory Stick PRO Format Specifications-without security specifications

Ver.1.02-00 compatible

Memory Stick Duo The Memory Stick Duo adapter should be used
Memory Stick Pro Duo The Memory Stick Duo adapter should be used.

Memory Stick micro The Memory Stick adapter for standard size should be used.

miniSD/microSD The SD adapter should be used

SDHC 32GB Speed Class is not supported
miniSDHC/microSDHC The SD adapter should be used

MultiMediaCard
MultiMediaCard Plus

Compact Flash CF+ and CompactFlash Specification Revision 4.1 compatible 32GB True-IDE compatible memory card only

Microdrive

Ver. 2.0 compatible

MultiMediaCard Standard Ver. 4.2 compatible

32GB

2GB

4GB/32GB

2GB

Copy protection function is not supported

Speed Class is not supported

Only MultiMediaCard Plus supports 32GB

Type M/H supported

cannot be accessed.

• When cards are inserted in the two slots at once, the slot which will be accessed first is
determined according to the priority shown in the table.

• To select a card that has been inserted in a non-active slot, first remove the card in the
active slot.

• In memory card direct printing mode, the image files in the active slot are valid and
have assigned frame numbers. The number of images will not change if a card is

(This is for Windows. For Macintosh, the card in the active slot will be mounted on the
desktop.)

• Does not support 5V type of memory cards.

• When a memory card is being accessed, do not touch the memory card.

• For detailed information on the supported file system and formatting the memory card,
refer to “ 1.7.3 Memory Card Direct Print Function ( p. 36 ) ”.

inserted in another nonselected slot.

• When the card inserted in the slot is accessed from the PC, only one drive is displayed
at a time as a removable disk* and only the card that is in the active slot can be
accessed via the removable disk. A card that has been inserted into a non-selected slot

PRODUCT DESCRIPTION Interface 26

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

Power button

Start button

Stop/Clear button

Copy button

Memory Card button

Scan button

Display/Crop button

Setup button

- button

Menu button

Back button

+ button

LCD

Power LED

Cross key and OK button

Note : The Card Access LED is provided near the memory card slot.

WiFi LED

Photo button

1.6 Control Panel

1.6.1 Operation Buttons & LEDs

 NX510 series

Table 1-30. NX510 series Buttons & LEDs

Button/LED Function

Power Turns the power ON/OFF.

Start Starts printing.

Stop/Clear

Setup

Button

Display/Crop

Menu Goes to the print setting menu screen.

OK Accepts the changed settings

Back Cancels the previous operation.

Cross Key

(Up/Down/Left/Right)

+

-

Copy Goes to the stand alone Copy mode.

Memory Card Goes to the memory card direct print mode.

Photo Goes to the Photo mode. (Repeat printing)

Scan Goes to the Scan mode.

Power (Green)

LED

WiFi (Green) • Flashes when wireless LAN connected

Card Access
(Green)

• Stops operation and displays the menu screen.

• Stops printing and ejects paper.

• Returns the print settings in the current mode to their default
and displays the Top screen. (Returns to the previous screen
during printing maintaining the current settings)

Goes to the Setup mode that provides maintenance menu (head
cleaning, head alignment, etc.) and various setting menu.

• Goes to the zoom setting screen for the selected image.

• Changes the image preview layout on the LCD.

Selects a menu item or a setting value.

Sets the number of copies.

• Flashes at power ON/OFF.

• Flashes during some sequence is in progress.

• Flashes when an fatal error occurs.

• Lights when a memory card is inserted.

• Flashes when a memory card is being identified or accessed.

Figure 1-5. NX510 series Control Panel

PRODUCT DESCRIPTION Control Panel 27

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

Power button

Start button

Stop/Clear button

Copy button

Memory Card button

Photo button

Display/Crop buttonSetup button

- button

Menu button

Back button

+ button

LCD

Power LED

Cross key and OK button

Note : The Card Access LED is provided near the memory card slot.

 SX410 series

Table 1-31. SX410 series Buttons & LEDs

Button/LED Function

Power Turns the power ON/OFF.

Start Starts printing.

• Stops operation and displays the menu screen.

• Stops printing and ejects paper.

Button

LED

Stop/Clear

Setup

Display/Crop

Menu Goes to the print setting menu screen.

OK Accepts the changed settings

Back Cancels the previous operation.

Cross Key

(Up/Down/Left/Right)

+

-

Copy Goes to the stand alone Copy mode.

Memory Card Goes to the memory card direct print mode.

Photo Goes to the Photo mode. (Repeat printing)

Power (Green)

Card Access
(Green)

• Returns the print settings in the current mode to their default
and displays the Top screen. (Returns to the previous screen
during printing maintaining the current settings)

Goes to the Setup mode that provides maintenance menu (head
cleaning, head alignment, etc.) and various setting menu.

• Goes to the zoom setting screen for the selected image.

• Changes the image preview layout on the LCD.

Selects a menu item or a setting value.

Sets the number of copies.

• Flashes at power ON/OFF.

• Flashes during some sequence is in progress.

• Flashes when an fatal error occurs.

• Lights when the status is other than above. (i.e. when in
stand-by / in setting operation using the control panel)

• Lights when a memory card is inserted.

• Flashes when a memory card is being identified or accessed.

Figure 1-6. SX410 series Control Pane

PRODUCT DESCRIPTION Control Panel 28

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

Power button

Start buttonStop/Clear button

Copy button

Photo button

Scan button

Paper Type button

- button

Left/Right button

+ button

LCD

Power LED

Note : The Card Access LED is provided near the memory card slot.

Index Sheet button

Paper LED

Paper LED

Zoom button

 SX210 series

Table 1-32. SX210 series Buttons & LEDs

Button/LED Function

Power Turns the power ON/OFF.

Start Starts printing.

• Stops operation and displays the menu screen.

• Stops printing and ejects paper.

Stop/Clear

Paper Type Selects paper type and size.

Zoom Goes to the zoom setting screen.

Button

Left/Right Selects a menu item or a setting value.

+

-

Copy Goes to the stand alone Copy mode.

Photo Goes to the memory card direct print mode.

Index Sheet Prints an index sheet.

Scan Goes to the Scan mode.

Index Sheet + Scan Goes to the Setup mode.

Power (Green)

LED

Paper (Green) Selected paper type and size light.

Card Access
(Green)

• Returns the print settings in the current mode to their default
and displays the Top screen. (Returns to the previous screen
during printing maintaining the current settings)

Sets the number of copies.

• Flashes at power ON/OFF.

• Flashes during some sequence is in progress.

• Flashes when an fatal error occurs.

• Lights when the status is other than above. (i.e. when in
stand-by / in setting operation using the control panel)

• Lights when a memory card is inserted.

• Flashes when a memory card is being identified or accessed.

Figure 1-7. SX210 series Control Pane

PRODUCT DESCRIPTION Control Panel 29

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510 Revision A

1.6.2 Control Panel Functions in Each Mode

This product provides the guidance for button operations for each mode on the LCD; therefore, the details of the control panel operations are omitted here. This section describes
print setting items in each mode, and the timing of saving and initialization.

1.6.2.1 Control Panel Functions for NX510 series

Table 1-33. Timing of Saving or Initializing Control Panel Settings (NX510 series)

Mode Print Setting Default Value Saving Timing Initializing Timing

Copy Number of copies 1 When the Start button is pressed When the Stop/Clear button is pressed

Copy Type Color

Layout With Border

Zoom Actual

Paper Size A4(Other), Letter(EAI)

Paper Type Plain Paper

Quality Standard

Density ±0

Expansion Standard

Memory Card Paper Size 4x6 inch When the Start button is pressed When the Stop/Clear button is pressed

Paper Type Prem. Glossy

Layout Borderless

Quality Standard

Expansion Standard

Date Off

Bidirectional On

Select (Print Index Sheet setting) All Photos

Information (Print Index Sheet setting) (EAI only) File Name

Photo Paper Size 4x6 inch When the Start button is pressed When the Stop/Clear button is pressed

Paper Type Prem. Glossy

Layout Borderless

Quality Standard

Expansion Standard

Color Restoration Off

Scan Select PC USB Connection When the OK button is pressed When the Stop/Clear button is pressed

*

PRODUCT DESCRIPTION Control Panel 30