
Start Here
Point de départ
Epson Stylus®C88
Please read these instructions before using the printer.
Lisez ces instructions avant d’utiliser l’imprimante.
1
Unpack
+
Déballez l’imprimante
If anything is missing, contact Epson®as described on the back of this sheet.
S’il manque un élément, communiquez avec Epson®tel qu’indiqué au verso.
Remove all the tape.
Retirez tout le ruban adhésif.
2
Turn On the Printer
Allumez l’imprimante
1 Connect the power cable.
Branchez le cordon d’alimentation.
2 Press the power button.
Appuyez sur le bouton d’alimentation .

3
Install Ink Cartridges
Installez les cartouches
1 Lower the output tray and open the cover.
Abaissez le plateau de sortie et ouvrez le capot.
2 Open the ink cartridge cover.
Soulevez le couvercle du support de cartouches d’encre.
3 Shake the ink cartridges, then unpack them.
Agitez les cartouches d’encre, puis déballez-les.
4 Insert the cartridges in the holder for each color.
Insérez les cartouches dans leur support en faisant correspondre
les couleurs.
5 Press the cartridges down until they click.
Appuyez sur les cartouches jusqu’à ce qu’elles s’enclenchent.

6 Close the ink cartridge cover. Make sure it clicks into place.
Fermez le couvercle du support de cartouches. Appuyez dessus
jusqu’à ce qu’il s’enclenche.
7 Close the printer cover.
Fermez le capot de l’imprimante.
8 Press the ink button to charge ink. Charging takes about 2 minutes.
Appuyez sur le bouton d’encre pour charger l’encre. Le chargement
prend environ 2 minutes.
Caution: Don’t turn off the printer while the power light is flashing
or you’ll waste ink.
Mise en garde : N’éteignez pas l’imprimante pendant que le témoin
d’alimentation clignote, sinon vous gaspillerez de l’encre.
4
Load Paper
Chargez le papier
1 Insert the paper support into the slot on the back.
Insérez le support à papier dans la fente au dos de l’imprimante.
2 Pull out the output tray extension.
Tirez la rallonge du plateau de sortie.