Epson S5U13T04P00C100 User Manual

S5U13T04P00C100
Evaluation Board User Manual

Document Number: XA3A-G-001-00

SEIKO EPSON CORPORATION

Rev. 1.0

Page 2

Evaluation board/kit and Development tool important notice

1. This evaluation board/kit or development tool is designed for use for engineering evaluation,

demonstration, or development purposes only. Do not use it for other purpose. It is not intended to
meet the requirement of design for finished product.

2. This evaluation board/kit or development tool is intended for use by an electronics engineer, and it is

not a consumer product. The user should use these goods properly and safely. Seiko Epson dose not
assume any responsibility and liability of any kind of damage and/or fire caused by usage of it. The
user should cease to use it when any abnormal issue occurs, even during proper and safe use.

3. The parts used for this evaluation board/kit or development tool may change without notice.

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko
Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any
liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or
circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as,
medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no
representation or warranty that anything made in accordance with this material will be free from any patent or copyright
infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic
products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the
Ministry of Economy, Trade and Industry or other approval from another government agency.

All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

©SEIKO EPSON CORPORATION 2013, All rights reserved.

S5U13T04P00C100 Evaluation Board User Manual XA3A-G-001-00
Revision 1.0 Issue Date: 2013/03/15

Seiko Epson Corporation

Page 3

Table of Contents

1 Introduction ......................................................................................................................... 4

2 Features ............................................................................................................................. 5

3 Setup and Configuration ..................................................................................................... 6

4 Connectors ......................................................................................................................... 7

4.1 J1 Panel Interface Connector ................................................................................................... 8

4.2 J2 Power Connector ................................................................................................................. 8

4.3 J3 Host Interface Connector ..................................................................................................... 9

4.4 J4 Production Test Connector .................................................................................................. 9

5 Parts List ............................................................................................................................10

6 Schematic Diagram ............................................................................................................11

7 References ........................................................................................................................13

8 Change Record ..................................................................................................................14

XA3A-G-001-00 S5U13T04P00C100 Evaluation Board User Manual
Issue Date: 2013/03/15 Revision 1.0

Seiko Epson Corporation

Page 4

1 Introduction

This manual describes the setup and operation of the S5U13T04P00C100 reference board.
This reference board is designed as an evaluation platform for the S1D13T04 EPD Timing Controller.

The S5U13T04P00C100 reference board has a host interface connector, EPD panel connector, and a 2.0
inch EPD panel.

This user manual is updated as appropriate. Please check the Seiko Epson Website at

http://www.epson.jp/device/semicon_e/product/lcd_controllers/index.htm for the latest revision of this

document before beginning any development.
We appreciate your comments on our documentation. Please contact us via email at

[e-mail].

S5U13T04P00C100 Evaluation Board User Manual XA3A-G-001-00
Revision 1.0 Issue Date: 2013/03/15

Seiko Epson Corporation

Page 5

2 Features

The S5U13T04P00C100 reference board includes the following features:

• Supports SPI host interface

• Epson’s S1D13T04 EPD Timing Controller.

• Power connector

• Panel Interface connector.

• 2.0 inch EPD panel.

XA3A-G-001-00 S5U13T04P00C100 Evaluation Board User Manual
Issue Date: 2013/03/15 Revision 1.0

Seiko Epson Corporation

Page 6

S1D13T0

4

J3

Host

I/F

U1

Reserved

For Testing

J4

Panel

I/F

J1

2.0

Inch

EPD

Panel

Power

J2

JP2

HVDD

Q1

JP

1

RVDD

CNF0

JP3/JP4

SVT13T0

4 board

3 Setup and Configuration

The main functional blocks of the evaluation board are shown below.

Figure 3-1 S5U13T04P00C100 Reference Board Block Diagram

CNF0 is configured with jumpers JP3 and JP4 as shown in the following table.

Table 3-1 CNF0 Configuration Selection

CNF0 JP3 JP4

0 Open Short H_RDY signal is all ways driven (Default)
1 Short Open H_RDY signal is open drain signal

Comments

S5U13T04P00C100 Evaluation Board User Manual XA3A-G-001-00
Revision 1.0 Issue Date: 2013/03/15

Seiko Epson Corporation

Page 7

4 Connectors

The S5U13T04P00C100 reference board has four connectors for Host Interface, Panel Interface, Power
and Reserved for Production Test (J1, J2, J3 and J4). The location of these connectors is shown in the
following figure.

J1

J4

J2 J3

Figure 4-1 S5U13T04P00C100 Reference Board Top View / Connector Locations

Figure 4-2 S5U13T04P00C100 Reference Board Bottom View

XA3A-G-001-00 S5U13T04P00C100 Evaluation Board User Manual
Issue Date: 2013/03/15 Revision 1.0

Seiko Epson Corporation

Page 8

4.1 J1 Panel Interface Connector

The panel interface pins of the S1D13T04 are connected through J2.

Table 4-1 J1 Panel Interface Connector

Connector : J1
Manufacture : HIROSE FH12S-40S-0.5SH 40pin

Pin No. Signal Name

1 CSB EPD Chip Select 21 C15P
2 BUSY EPD BUSY 22 C14M

3 ID Set ID to 0 23 C14P
4 SCLK Serial Clock 24 C13M Charge Pump
5 SI Serial data output 25 C13P
6 SO Serial data input 26 C12M Charge Pump

7 RESETB EPD Reset 27 C12P
8 ADC_IN N.C. 28 C11M Charge Pump

9 VCL EPD VCL Capacitor 29 C11P
10 C42P
11 C42M 31 VCC +3.3V for analog
12 C41P
13 C41M 33 GND Ground
14 C31P
15 C31M 35 VGL EPD VGL
16 C21P
17 C21M 37 VDL EPD VDL
18 C16P
19 C16M 39 VST EPD VST

20 C15M

Description Pin No. Signal Name Description

Charge Pump
Capacitor

Charge Pump
Capacitor

Capacitor

Capacitor

Capacitor

Charge Pump
Capacitor

Charge Pump
Capacitor

Charge Pump
Capacitor

Charge Pump
Capacitor

Charge Pump
Capacitor

Charge Pump
Capacitor

30 VCOM_DRIVER VCOM from Driver IC

32 VDD +3.3V for digital

34 VGH EPD VGH

36 VDH EPD VDH

38 BORDER EPD BORDER

40 VCOM_PANEL EPD VCOM

4.2 J2 Power Connector

Power for the S5U13T04P00C100 Evaluation Board is supplied through J2.

Table 4-2 J2 Panel Interface Connector

Pin No. Signal Name Description

1 VCC Power supply +3.0V
2 GND Ground

S5U13T04P00C100 Evaluation Board User Manual XA3A-G-001-00
Revision 1.0 Issue Date: 2013/03/15

Seiko Epson Corporation

Page 9

4.3 J3 Host Interface Connector

The host interface pins of the S1D13T04 are connected through J3.

Table 4-3 J3 Host Interface Connector

Pin No. Signal Name Direction Description

1 GND Power Ground
2 H-MOSI Input SPI interface master to slave data
3 H-MISO Output SPI interface slave to master data
4 H-SCLK Input SPI interface serialize clock
5 H-SS Input SPI interface slave select signal
6 H-RDY Output 0 = S1D13T04 is busy

1 = S1D13T04 is ready

7 H-WAKEUP Input 0 = Puts the S1D13T04 in sleep mode

8 H-STAT Output 0 = S1D13T04 is in sleep mode

9 H-RESET Input 0 = Reset is active

10 GND Power Ground

1 = Puts the S1D13T04 in run mode

1 = S1D13T04 is in run mode

1 = Reset is inactive

4.4 J4 Production Test Connector

J4 is reserved for Production Testing and should not be used.

XA3A-G-001-00 S5U13T04P00C100 Evaluation Board User Manual
Issue Date: 2013/03/15 Revision 1.0

Seiko Epson Corporation

Page 10

5 Parts List

Table 5-1 S5U13T04P00C100 Bill of Materials

Item Quantity

1 1 D1 BAT54SW NXP
2 1 J1 FH12S-40S-0.5SH(55) HIROSE
3 2 Q3,Q2 2N7002 NXP
4 1 Q1 ZXMP6A13FTA DIODES Inc.

5 1 U2 SN74LVC1G08IDCKR
6 1 U1 S1D13T04 EPSON P-TQFP064-1010-0.50
7 2 C11,C32 GRM21BB31A106KE18L MURATA 2012 10uF ±10% DC10V

8 11
9 1 C5 GRM21BB31E475KAL75L MURATA 2012 4.7uF ±10% DC25V
10 1 C31 GRM188B11E104KA01 MURATA 1608 0.1uF ±10% DC25V
11 1 C13 GRM21BF61A225KA01 MURATA 2012 2.2uF ±10% DC10V X5R

12 7
13 2 C27,C28 GRM188F61C225KA12 MURATA 1608 2.2uF ±10% DC25V X5R

14 5
15 1 C24 GRM155R11C104KA88D MURATA 1005 0.1uF ±10% DC16V
16 1 C29 GRM188R71A105KA61 MURATA 1608 1uF ±10% DC16V
17 3 R1,R7,R8 RK73B1JTTP1002F KOA 1608 10.0K ±5% 0.063W
18 1 R4 RK73B1ETTP202J KOA 1005 2.0K ±5% 0.063W
19 1 R5 RK73B1JTTD333J KOA Nomount (1608 33K ±5% 0.1W)
20 1 JP4 RK73Z1JTTD KOA 1608 0 — 1A
21 1 J2 6-102974-0 TE 2/10 -pin
22 1 J3 6-102974-0 TE 10-pin
23 1 J4 961108-5500-AR-PR 3M 10-pin
24 1
25 3 JP3,R2,R3 RK73Z1JTTD KOA Nomount (1608 0 — 1A)
26 1 R6 RK73B1JTTD103J KOA Nomount (1608 10K — 1A)

Reference Part Manufacture Description

Texas
Instruments

C1,C2,C3,C4,C6,
C7,C8,C9,C10,
C12,C30 GRM155B11A104K MURATA 1005 0.1uF ±10% DC16V

C14,C15,C17,
C20,C21,C22,
C23 GRM188F61C225KE15 MURATA 1608 2.2uF ±10% DC16V X5R

C16,C18,C19,
C25,C26

GRM319F61E225KA12 MURATA 3216 2.2uF ±10% DC25V X5R

—

— 2.0inch EPD panel

S5U13T04P00C100 Evaluation Board User Manual XA3A-G-001-00
Revision 1.0 Issue Date: 2013/03/15

Seiko Epson Corporation

Page 11

6 Schematic Diagram

1

28.8mm

1 1Thursday, March14 , 2013

1

<Doc> 1.0

57 mm

SVT13T04Board(S5U13T04P00C100)

A3

Title

Size Document Number Rev

Date: Sheet of

2

2

EPD PANEL

Module

8.1mm

3

4.5

mm

J1

1

2mm

Panel

Connector

40

13mm

3

62mm

4

81mm

J4

D13T04

5

J3

Power

S1D13T04 Board

6.08

mm

Connector

J2

SVT13T04 Boar d

D D

C C

Host I/F

Connector

3.54

mm

Hole center Offset

x: 3.0mm / y: 3.0mm

M3 (Hole size 3.2mm)

B B

A A

Figure 6-1 S5U13T04P00C100 Schematic Diagram (1 of 2)

XA3A-G-001-00 S5U13T04P00C100 Evaluation Board User Manual
Issue Date: 2013/03/15 Revision 1.0

Seiko Epson Corporation

4

5

Page 12

1

2

3

4

CSB

BUSYIDSCLKSISO

RESETB

ADC_IN

VCL

C42P

C42M

C41P

C41M

C31M

C31P

C21M

C21P

C16M

C16P

C15M

C15P

C14M

C14P

C13M

C13P

C12M

C12P

C11M

C11P

VCOM_DRIVER

VCC

VDD

GND

VGH

VGL

VDH

VDL

BORDER

VST

VCOM_PANEL

J1

123456789

CSB

T04 AVDD pas con

C10

0.1uF/10V

HVDD

T04 HVDD pas con

HVDD

60pin

C30

55pin

C9

0.1uF/10V

40pin

C8

0.1uF/10V

C7

0.1uF/10V

C6

0.1uF/10V

45pin 21pin8pin

C5

4.7uF/25V

50pin

C4

0.1uF/10V

HVDD

10k

R7

R1

HVDD

0.1uF/10V

5

4

Y

Vcc

U2

A

GND

B

SN74LVC1G08

132

10k

H-RESET

D-RESET

RESET_T03

10111213141516171819202122232425262728293031323334353637383940

SCLK

RESET

SOSIBUSY

ID

2.2uF/16V/Y5V

C14

C15

2.2uF/10V/Y5V

C13

2.2uF/16V/Y5V

2.2uF/25V/Y5V

2.2uF/25V/Y5V
C20

C18

C16

2.2uF/16V/Y5V

2.2uF/16V/Y5V

2.2uF/25V/Y5V

C17

C21

C19

2.2uF/16V/Y5V

C22

2.2uF/16V/Y5V

2.2uF/16V/Y5V

C23

RVDD

H-WAKEUP

H-RDY

H-STAT

VPP

45pin

C3

0.1uF/10V

OPEN

JP3JP4

SHORT

C2

0.1uF/10V

23pin7pin

T04 LVDD pas con

C1

LVDD

0.1uF/10V

OPEN

SHORT

1

0

CNF0

No Mount

0

JP3

HVDD

JP4 0

RESET_X

49

LVDD

50

NC

51

NC

52

NC

53

CNF0

54

HVDD

55

VSS

56

NC

57

NC

58

NC

59

AVDD

60

NC

61

NC

62

NC

63

NC

64

484746454443424140393837363534

VIN

VSS

VOUT

HRDY

HVDD

PPWM

HSTAT

RSV_H

HWKUP

U1

NC

NC

VPP

RSV_L

RSV_L

S1D13T04

NC

PS2MDI

VSS

PM2SDO

PSCLK

PRESET

LVDD

HVDD

HS2MDINCHM2SDO

123456789

HSCLKNCNC

10111213141516

HIROSE

FH12S-40S-0.5SH

0

0

R3

R2

No Mount

No Mount

R4

BAT54SW

D1

C24

33

NC

VSS

SHTDWN

PDISCHRG

2k/5%

NC
HCSB
NC
DCLK
RSV_L
DSIO
DST2
PBUSY
NC
LVDD
PCSB
HVDD
VSS
NC
NC
NC

1uF/10V/X7R

C29

2.2uF/16V/Y5V

C28

2.2uF/16V/Y5V

C27

2.2uF/25V/Y5V

C26

2.2uF/25V/Y5V

C25

No Mount

33k/5%

R5

Q3

2N7002

Q2

0.1uF/16V/X7R
2N7002

32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17

DSIO

H-SS

DST2

DCLK

1 1Monday, March 18, 2013

1

<Doc> 1.0

SVT13T04 Board (S5U13T04P00C100)

A3

Title

Size DocumentNumber Rev

Date: S heet of

2

3

4

RVDD

12

..

JP1

SHORT

G

G

TOSHIBA

S D

Q1

SSM3J305T

5

S D

JP2

SHORT

..

HVDD

12

D D

LVDD

HVDD

D-RESET

DST2

DCLK

1234567

DSIO

8

3M

961108-5500

A A

H-SCLK

H-S2MDI

C12

0.1uF/10V

C11

10uF/10V

1

2

J2

6-102974-0 2/10pin

R6

HVDD

No Mount

C C

H-M2SDO

H-S2MDI

10 K

123456789

J3

H-RESET

H-SCLK

H-SS

H-STAT

H-RDY

H-WAKEUP

10

H-M2SDO

HVDD

Internal Use Only

6-102974-0 10pin

+7.0V

VPP

B B

R8

10kJ4

10uF/10V

C32

0.1uF/25V

C31

Figure 6-2 S5U13T04P00C100 Schematic Diagram (2 of 2)

S5U13T04P00C100 Evaluation Board User Manual XA3A-G-001-00
Revision 1.0 Issue Date: 2013/03/15

Seiko Epson Corporation

5

Page 13

7 References

Epson Research and Development, Inc., S1D13T04 Hardware Functional Specification, document
number XA3A-A-001-xx.

XA3A-G-001-00 S5U13T04P00C100 Evaluation Board User Manual
Issue Date: 2013/03/15 Revision 1.0

Seiko Epson Corporation

Page 14

8 Change Record

XA3A-G-001-00 Revision 1.0 - Issued: March 14, 2013

• Release document as rev 1.0

S5U13T04P00C100 Evaluation Board User Manual XA3A-G-001-00
Revision 1.0 Issue Date: 2013/03/15

Seiko Epson Corporation

International Sales Operations

AMERICA

EPSON ELECTRONICS AMERICA, INC.

214 Devcon Drive,
San Jose, CA 95112, USA
Phone: [phone] FAX: [phone]

EUROPE

EPSON EUROPE ELECTRONICS GmbH

Riesstrasse 15, 80992 Munich,
GERMANY
Phone: [phone] FAX: [phone]

ASIA

EPSON (CHINA) CO., LTD.

7F, Jinbao Bldg., No.89 Jinbao St.,
Dongcheng District,
Beijing 100005, CHINA
Phone: [phone] FAX: [phone]

SHANGHAI BRANCH

7F, Block B, Hi-Tech Bldg., 900 Yishan Road,
Shanghai 200233, CHINA
Phone: [phone] FAX: [phone]

SHENZHEN BRANCH

12F, Dawning Mansion, Keji South 12th Road,
Hi-Tech Park, Shenzhen 518057, CHINA

Phone: [phone] FAX: [phone]

EPSON HONG KONG LTD.

Unit 715-723, 7/F Trade Square, 681 Cheung Sha Wan Road,
Kowloon, Hong Kong.
Phone: [phone] FAX: [phone]

EPSON TAIWAN TECHNOLOGY & TRADING LTD.

14F, No. 7, Song Ren Road,
Taipei 110, TAIWAN
Phone: [phone] FAX: [phone]

EPSON SINGAPORE PTE., LTD.

1 HarbourFront Place,
#03-02 HarbourFront Tower One, Singapore 098633
Phone: [phone] FAX: [phone]

SEIKO EPSON CORP.
KOREA OFFICE

5F, KLI 63 Bldg., 60 Yoido-dong,
Youngdeungpo-Ku, Seoul 150-763, KOREA
Phone: [phone] FAX: [phone]

SEIKO EPSON CORP.
MICRODEVICES OPERATIONS DIVISION

IC Sales & Marketing Department

421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN
Phone: [phone] FAX: [phone]

Document Code: XA3A-G-001-00

Revised October 2012 in JAPAN

First Issue March 2013