Epson X39, W39, S39 User Manual
PowerLite® S39/X39/W39
Quick Setup
PowerLite S39/X39
Before using the projector, make sure you read the safety instructions in the
online User’s Guide.
Note: Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide for details.
Computer
PowerLite W39
USB cable
HDMI cable
VGA cable
Audio cable
Component video to VGA cable
HDMI cable
RCA video cable
(composite video)
RCA audio
cable
USB device or Epson DC-07 document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07
document camera to the projector’s USB-A (flat) port.
PowerLite W39
USB cable
PowerLite S39/X39
USB cable
HDMI cable
VGA cable
Audio cable
HDMI port
Connect one end of an HDMI cable to one of the projector’s HDMI ports shown
above and the other end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to the projector’s Computer1 or Computer2
port, and the other end to your laptop or computer’s monitor port. Make
sure to switch your laptop to external display (see “Troubleshooting” on the
back of this sheet). You can also connect an audio cable.
USB port
Connect the square end of a USB cable to the projector’s USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
PowerLite S39/X39
USB cable
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. See the online User’s Guide for details.
Turn on your equipment
Turn on your computer or video source.
1
Plug in the projector. The power light on the projector turns blue.
2
Windows Vista® or later: After turning on the projector, follow the on-screen
instructions to install the Epson® USB Display software (EMP_UDSE.EXE; only
on first connection). If the software screen does not display automatically, open
My Computer, Computer, or This PC, then double-click EPSON_PJ_UD.
OS X 10.7.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Video device
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them.
PowerLite W39
Component video to VGA cable
HDMI cable
Open the A/V Mute slide all the way.
3
Press the power button on the projector or remote control. The
4
projector beeps, the Status light flashes blue, and then stays on.
RCA video cable
(composite video)
RCA audio
cable
Note: To shut down the projector, press the power button twice.
Use the arrow buttons on the remote control to highlight any of the
5
options on the Home screen that appears, then press to select it.
You can switch between projection sources and quickly access various
adjustment options from this screen.
Using the remote control
Install the batteries as shown (two AA batteries).
The default language of the menu system is English. To select another
6
language, press the Menu button on the projector or remote control.
Select Extended and press . Select Language and press . Select
your language and press . Press the Menu button to exit the menu
system.
Adjust the image
If you don’t see an image, press the Source Search button on the
1
projector or remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
To raise the image, press the foot release button and lift the front of the
2
projector. Release the button to lock the foot in position.
Turn projector
on and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online User’s Guide.
Choose which source
to display
Navigate projector
menus
Access the Home
screen
Project over a wired
To reduce or enlarge the image, turn the zoom ring.
3
To sharpen the image, turn the focus ring.
4
If your image looks like or , you may have placed the projector
5
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can’t
move the projector, use the horizontal keystone slider on the projector to
correct the image shape.
network
Follow the steps here to configure your projector for your wired network using
the projector’s menu system (PowerLite X39/W39).
Plug in and turn on the projector.
1
Press the Menu button on the remote control, select the Network menu,
2
and press .
Select Network Configuration and press .
3
Select the Basic menu and press .
4
Your projector automatically adjusts images that look like or ,
6
but if necessary you can press the or button on the projector to
correct it.
Select the Projector Name setting and enter a name (up to 16 characters
5
long) to identify your projector over the network.
Use the displayed keyboard to enter characters. Press the arrow buttons
on the remote control to highlight the characters and press to select
them.
Note: See the online User’s Guide for information on adding passwords.
Loading...