Epson RUNSENSE SF-310, RUNSENSE SF-710, RUNSENSE SF-510 IPHONE GUIDE
SF-310/510/710 Smartphone User's Guide
Introduction
Introduction
Thank you very much for purchasing this GPS Sports Monitor "RUNSENSE".
To use the product correctly, make sure you read the Smartphone User's Guide with the Quick Start Guide and User
Manual.
The illustrations and screens shown in the Smartphone User's Guide are for the SF-710.
Descriptions in the Smartphone User's Guide
Important:
c
Note:
Menu Name Indicates menu items displayed on the screen of the device.
A/B/C/D
U
Trademarks
EPSON and EXCEED YOUR VISION are registered trademarks of the Seiko Epson Corporation.
iPhone is a trademark of Apple Inc. registered in the U.S.A. and other countries.
App Store is the name of a service provided by Apple Inc. that allows iPhone users to download application software.
The trademark IOS is used according to the Cisco's licence in the U.S.A. and other countries.
The Bluetooth
marks by the Seiko Epson Corporation is under licence.
Other product names are the trademarks or registered trademarks of their respective companies.
word mark and logos are the registered trademarks owned by Bluetooth SIG, Inc. and any use of such
®
Indicates things you must or must not do. Ignoring these instructions or
mishandling this device could cause malfunction or operational problems
to the device.
Indicates additional explanations and related information.
Indicates the device buttons.
Indicates related pages. Click the link in blue text to display the related
page.
Cautions:
❏ Unapproved copying of part or all of this guide is strictly forbidden.
❏ The content of this guide is subject to change without prior notice.
❏ Although every effort has been made to ensure the accuracy of this guide, contact us if you have any questions or
notice any errors in descriptions in the content of this guide.
❏ Despite the preceding clause, we cannot accept any responsibility for mishandling due to errors in this guide.
❏ We cannot accept any responsibility for any injuries or obstructions that were caused by ignoring the contents of
this guide, inappropriate handling of the device, or repairs or modifications performed by a third party who is not
appointed by us.
2
SF-310/510/710 Smartphone User's Guide
Introduction
What you can do with this smartphone APP
This app allows you to communicated using Bluetooth with your RUNSENSE product and share data wirelessly with
the RUNSENSE View web application for analysis. You can also send and save product settings to and from the
RUNSENSE device and your phone.
Note:
This guide describes how you can transfer the data to iPhone and manage it with the web application (RUNSENSE View).
Refer to the User Manual for how you can manage the data via a personal computer.
Supported devices
iPhone 4S, iPhone 5, iPhone 5C, and iPhone 5S
* Use iPhones that support Bluetooth 4.0 to communicate with this product.
Supported iOS
iOS 6 or later
iPhone application (Run Connect)
Run Connect has the following features.
❏ Upload measurement data to the web application (RUNSENSE View)
❏ Access the web application (RUNSENSE View) to view the measurement
data
❏ Access the web application (RUNSENSE View) to enter the body weight
and body fat information.
❏ Update measurement settings such as AT Lap, Target Pace, Waypoint,
and Interval, user settings, and system settings.
❏ Reduces the GPS positioning time (iPhone only)
❏ Pairs RUNSENSE device and iPhone to communicate via Bluetooth
❏ Manage your RUNSENSE account settings.
3
SF-310/510/710 Smartphone User's Guide
Contents
Contents
Introduction
What you can do with this smartphone APP...... 3
Preparation
Install the Run Connect app to your iPhone. . . . . . . 6
Create and configure your RUNSENSE View
account................................. 7
Creating an account...................... 7
Configuring the account................... 9
Enabling Bluetooth on your iPhone............ 10
Pair the RUNSENSE device with your iPhone..... 11
Uploading and Checking
Measurement Data
Uploading Measurement Data................ 14
Checking Uploaded Measurement Data......... 17
About Web Application (RUNSENSE View)
.................................... 18
Entering Weight and Body Fat................ 18
Changing the Settings
Settings................................. 21
How to Configure....................... 21
List of Settings......................... 24
Advanced Settings (SF710 Only).............. 29
Displaying the Advanced Settings........... 29
Setting the AT Lap Function............... 30
Setting the Target Pace Function............ 33
Setting the Waypoint Function............. 37
Setting the Interval Function............... 39
Reducing the GPS Positioning Time (AGPS). . . . . 43
Troubleshooting
Problem Solving.......................... 46
Unpairing Devices........................ 48
Operations on the iPhone................. 48
Operations on the Product................ 50
Contacting us About this Product............. 51
4
SF-310/510/710 Smartphone User's Guide
Preparation
Preparation
For important safety and operation instructions for RUNSENSE devices please refure to the main product User
Manual.
You need to make the following preparations before use.
U “Install the Run Connect app to your iPhone” on page 6
U “Create and configure your RUNSENSE View account” on page 7
U “Enabling Bluetooth on your iPhone” on page 10
U “Pair the RUNSENSE device with your iPhone” on page 11
5
SF-310/510/710 Smartphone User's Guide
Preparation
Install the Run Connect app to your iPhone
Access the App Store and install Run Connect.
6
SF-310/510/710 Smartphone User's Guide
Preparation
Create and configure your RUNSENSE View account
Creating an account
You need to create an account for the Web application
(RUNSENSE View.)
Note:
If you already have a RUNSENSE View account, you can
use it with this device.
U “Configuring the account” on page 9
Start Run Connect on your iPhone.
A
Tap OK.
B
Note:
The following screen is displayed if you start Run
Connect the second time onwards. Tap Account
and proceed to step 3.
7
SF-310/510/710 Smartphone User's Guide
Preparation
Tap Create Account.
C
Create an account.
D
Enter Login ID (e-mail address) and Password.
When you have created an account,
E
follow the instruction on the screen to
configure the account.
Read the Terms of Use, select the checkbox, and
tap Create Account.
XXXXXXX@XXXXX.XX.XX
XXXXXXX@XXXXX.XX.XX
Note:
The entry does not satisfy the conditions when the
entry field is displayed in red. Check the message on
the screen and make sure your entry satisfies the
conditions.
8
SF-310/510/710 Smartphone User's Guide
Preparation
Configuring the account
Configure the account you have created.
Start Run Connect on your iPhone.
A
Enter Login ID and Password, and
C
then tap Set.
Check that you have configured your
D
account and tap OK.
Tap Account.
B
9
SF-310/510/710 Smartphone User's Guide
Preparation
Enabling Bluetooth on your iPhone
You need to enable Bluetooth settings on your iPhone
before communicating with this device.
Tap Settings on the iPhone.
A
Enable Bluetooth.
C
Tap Bluetooth.
B
10
SF-310/510/710 Smartphone User's Guide
Preparation
Pair the RUNSENSE device with your iPhone
You need to register this product to your iPhone before
communicating with the iPhone.
Start Run Connect on your iPhone.
A
Tap Start Pairing.
C
Hold down D on this product.
D
Bluetooth communication starts.
Tap Pairing.
B
Note:
You can also start Bluetooth communication from
the Settings menu on this product. Refer to
"Settings" in the User Manual for details.
11
SF-310/510/710 Smartphone User's Guide
Preparation
Tap OK on the iPhone.
E
Enter the Passcode (6-digit number)
F
to the iPhone and tap Pair.
Check that pairing has completed and
G
tap OK.
Note:
The screen differs slightly on iOS 6. Tap Pairing.
12
SF-310/510/710 Smartphone User's Guide
Uploading and Checking Measurement Data
Uploading and Checking Measurement Data
This chapter describes how to upload and check measurement data.
U “Uploading Measurement Data” on page 14
U “Checking Uploaded Measurement Data” on page 17
U “Entering Weight and Body Fat” on page 18
13
SF-310/510/710 Smartphone User's Guide
Uploading and Checking Measurement Data
Uploading Measurement Data
Upload measurement data to the web application
(RUNSENSE View.)
Take the following two steps to upload data via an
iPhone.
Uploading outline data
Upload data such as the distance, speed, HR, and
calories.
Uploading detailed data
Upload the running route in addition to the outline
data.
Important:
c
❏ You need to log in to RUNSENSE View and
register this product to the iPhone.
U “Preparation” on page 5
❏ Enable Bluetooth on the iPhone before
uploading measurement data.
Start Run Connect on your iPhone.
A
Tap Watch Data.
B
U “Enabling Bluetooth on your iPhone”
on page 10
Note:
It is recommended to upload the data via a personal
computer by setting this device in the cradle when
uploading data worth several hours such as
measurement data of a full marathon (uploading 4-hour
worth data with iPhone takes roughly 12 minutes.) Refer
to "Data Management Using the Web Application
(RUNSENSE View)" in the "User Manual" for how to
upload data via a personal computer.
Hold down D on this product.
C
Bluetooth communication starts.
14
SF-310/510/710 Smartphone User's Guide
Uploading and Checking Measurement Data
Note:
You can also start Bluetooth communication from
the Settings menu on this product. Refer to
"Settings" in the User Manual for details.
Tap OK on the iPhone.
D
The alarm on the product sounds and the outline
data upload starts.
Uploading outline data is complete.
To review the outline data select the item you
want to check from Watch Data List and tap
RUNSENSE View at the bottom right to display.
U “About Web Application (RUNSENSE
View)” on page 18
Proceed to step 6 if uploading detailed data.
Tap the data item you want to upload
F
and tap Upload.
Note:
Try again if the communication fails.
Tap Get Next Data when you have a
E
large volume of measurement data.
Get Next Data is displayed only when there is a
large volume of measurement data.
Hold down D on this product.
G
Bluetooth communication starts.
Note:
You can also start Bluetooth communication from
the Settings menu on this product. Refer to
"Settings" in the User Manual for details.
15
SF-310/510/710 Smartphone User's Guide
Uploading and Checking Measurement Data
Tap OK on the iPhone.
H
The alarm on the product sounds and the
detailed data upload starts.
The RUNSENSE View screen is displayed when
the upload has completed.
Note:
❏ Try again if the communication fails.
❏ The uploaded detailed data item is deleted
from Watch Data List.
❏ Repeat step 6 to 8 if you are uploading more
than one detailed data item from Watch Data
List.
16
Loading...