Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
R4CB56
Bluetooth Rev. B
COVER.FM A5 size
10/29/02
R
User’s Guide
®
xxxxxxx-00
xxx
Copyright © 2003 by SEIKO EPSON CORPORATION, Nagano, Japan.
Printed in XXXX
ii
R4CB56
Bluetooth Rev. B
BLUETOC.FM A5 size
10/29/02
L
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Contents
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Warnings, Cautions, and Notes . . . . . . . . . . . . . . . . . . . . . . . . . 1
When using this product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
About This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Names of Component Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connecting with/disconnecting from a printer . . . . . . . . . . . . . . . . 4
Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Disconnecting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Set Bluetooth preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting items and values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting up the Bluetooth Passkey (Bluetooth PIN). . . . . . . . . . 8
Print Settings and Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Print settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Specifications of This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Basic specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Profiles supported. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Wireless Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . 13
Copyrights and Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Safety Instructions
Before using this product, read all of the instructions in this
section and also refer to the documentation packed with your
printer.
Warnings, Cautions, and Notes
w
Warnings
must be followed carefully to avoid bodily injury.
c
Cautions
must be observed to avoid damage to your equipment.
Notes
contain important information and useful tips on the operation of your
printer.
When using this product
w
Warning:
❏ Do not use this product near medical equipment.
Radio wave may adversely affect cardiac pacemakers and
electrical medical equipment. Do not use this product inside
medical facilities.
❏ Use this product at least 22 cm away from the region where
the cardiac pacemaker is implanted.
Radio wave may adversely affect the functionality of the
cardiac pacemaker.
❏ Do not use this product near automatically controlled devices
such as automatic doors and fire alarms.
Radio wave may adversely affect these devices, and may cause
accidents due to malfunctions.
❏ Do not disassembly or modify this product.
Doing so will cause injury, electric shock and/or fire.
2
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
L
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
About This Product
This product is a wireless communication module used to print
from digital cameras and other devices with Bluetooth™ wireless
technology without cables when connected with EPSON printers.
The illustration above shows an image.
Note:
❏ While compatible with the Bluetooth wireless technology standard,
this product has not been confirmed to be compatible with all
products enabled with Bluetooth wireless technology. Further, this
product cannot be guaranteed to work when connected with other
products that are enabled with Bluetooth wireless technology.
❏ To obtain technical support, refer to the documentation attached to
the printer.
❏ Although the wireless communication range of this product is
approximately 10 meters, this may vary depending on conditions
including obstacles between the communication devices, the
electromagnetic signal quality, magnetic fields, static electricity and
electromagnetic interference, software used, operating system,
reception sensitivity of communicating devices, and antenna
performance.
1. Execute printing from
a device with Bluetooth
wireless technology.
2. Print from a printer.
3
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
About Profiles
Profiles are standards for Bluetooth wireless communication.
Multiple profiles are defined according to the features and
purpose of each product. To perform Bluetooth wireless
communication, the communicating devices must have mutually
compatible profiles.
Note:
The profiles that can be used with this product are Basic Imaging Profile
(BIP) and Hardcopy Cable Replacement Profile (HCRP). This product
cannot communicate with products with Bluetooth wireless technology
that cannot use BIP and HCRP.
Names of Component Parts
Light
It is on when Bluetooth wireless
communication can be performed.
It flashes during data reception.
Connector
Insert this product into the Bluetooth
port in the rear of the printer.
4
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
L
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Connecting with/disconnecting from a
printer
Connecting
1. Turn off the printer power.
c
Caution:
Do not connect while the printer power is on. Doing so may
cause the printer to malfunction.
2. Insert this product into the Bluetooth port in the rear of the
printer.
3. Turn on the printer power.
The power light comes on.
5
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Disconnecting
1. Turn off the printer power.
Verify that the LCD panel display goes off.
c
Caution:
Do not disconnect this product while the printer power is on.
Doing so may cause the printer to malfunction.
2. Remove this product from the Bluetooth port in the rear of the
printer by holding the sections as shown in the figure below.
c
Caution:
Do not remove this product by holding its upper section.
Doing so may damage the product.
6
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
L
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Set Bluetooth preferences
Set the preferences for Bluetooth on the printer’s LCD panel.
Setting items and values
The items and values of the preferences for Bluetooth set on the
LCD panel are as follows.
Setting item Setting value Description
Printer ID Printer name-Any
number from 0
through 9
(Default value: 1)
If there are multiple printers within a
range where Bluetooth wireless
communication is possible, printers
can be identified by assign ing a printer
ID to each printer.
Printer ID settings will take effect when
the printer power is turned off once
and then on again.
Connectivity Public/Private/
Bonding
Public This mode allows
search and
printing from
devices with
Bluetooth wireless
technology.
Private This mode
prohibits search
from devices with
Bluetooth wireless
technology.
To print, it is
therefore
necessary to
search for this
product in Public
mode first.
Bonding This mode
requires a
Bluetooth Passkey
to search and
print from devices
with Bluetooth
wireless
technology.
7
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Settings
1. Connect this product with your printer. For connecting the
unit, refer to “Connecting with/disconnecting from a printer”
on page 4.
c
Caution:
Be sure to connect this product after turning off the printer
power. If this product is connected while the printer power is
on, the printer may malfunction.
Encryption On/Off (Default
setting: Off)
The content of communication can be
encrypted. The entry of a Bluetooth
Passkey is required for encryption.
Passkey Any 4-digit
number (Default
value: 0000)
If a Bluetooth Passkey (any 4-digit
number) is set as the Passkey setting, it
must always be entered on a digital
camera or other device before
printing. This is used to prevent
interference from other products with
Bluetooth wireless technology.
To use a Bluetooth Passkey, select
Bonding in Connectivity.
Device
Address
(Example)
11-11-11-11-11-11
Displays the unique Bluetooth
communication address of this
product. If it is necessary to enter the
device address of this product on
another device that will communicate
with this product, communication may
not be possible if the device address
displayed here is entered. If that
happens, contact EPSON.
8
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
L
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
2. Press the d or u button to select Advanced Settings, and
then press , button.
3. Select a setting item with d or u, and then change its setting
value. Refer to “Setting items and values” o n pa ge 6 fo r se t ti n g
items and values.
Note:
If you are not sure of the LCD panel operating procedure, refer to the
User’s Guide that comes with your printer.
Setting up the Bluetooth Passkey (Bluetooth PIN)
Once you set up a Bluetooth Passkey, the entry of a Bluetooth
Passkey is always required on devices with Bluetooth wireless
technology.
The default value has been set to 0000.
9
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
1. Select Passkey with d or u, and then press , button.
2. Select a number for the first digit with d or u, and then press
, button.
3. Select a number for the second through fourth digits in the
same manner, and then press , button.
When Apply appears, press , button to apply the Bluetooth
Passkey.
10
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
L
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
This example sets “1234.”
Note:
Press - button to go back to the previous digit.
Print Settings and Printing
Perform print settings and printing on the printer’s LCD panel or
a device that sends printing data to the printer.
Print settings
The items that can be set on the printer’s LCD panel and those
that can be set on the device sending print data vary with the
profile used.
Note:
The setting items and their values on the device sending print data vary
with the device used. For more information, refer to the user’s manual
of the device used.
11
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Print settings when using Basic Image Profile
Print settings when using Hardcopy Cable Replacement
Profile
Note:
If data was printed using Hardcopy Cable Replacement Profile (HCRP),
the size of the data increases. Therefore, it takes longer to print.
Printing
For information about how to print from a digital camera or other
device with Bluetooth wireless technology, refer to the user’s
manual that comes with the device as well as the user’s manual
that comes with your printer.
Settings LCD panel
Setting
Device Setting Remarks
Print Mode No setting required Set to One.
Paper Type Enable Disable
Quality Enable Disable
Paper Size Enable Disable
Layout Enable Disable
Copies Enable Disable
Select Photo Disable Enable
Settings LCD panel
Setting
Device Setting Remarks
Print Mode Disable Enable Prints according
to the settings of
the device that
sends print data.
Paper Type
Quality
Paper Size
Layout
Copies
Select Photo
12
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
L
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Specifications of This Product
Bluetooth Unit C824✽✽✽
Note:
The asterisk is a substitute for the last digit of the product number, which
varies by location.
Basic specifications
Profiles supported
Basic Imaging Profile
Hardcopy Cable Replacement Profile
Communication system Bluetooth Standard Version 1.1
Output Bluetooth Standard Power Class 2
Communication distance Line-of-sight distance: Approximately 10 m
(*This may vary depending on various
conditions including obstacles between the
communication devices, the
electromagnetic signal quality, magnetic
fields, static electricity and electromagnetic
interference, software used, operating
system, reception sensitivity of
communicating devices, and antenna
performance.)
Operating frequency
band
2.4GHz bandwidth (2.400 GHz - 2.4835 GHz)
13
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/02
R
Proof Sign-off:
M.Yamada CRE Kawakami
J.Miyakoshi
editor name
Wireless Regulatory Information
The device must be used instrict accordance with the instructions
as described below.
For European Users
This product conforms to CE marking requirements in
accordance with the R & TTE directive 1999/5/EC.
EPSON cannot accept responsibility for any failure to satisfy the
protection requirements resulting from a non-recommended
modification of the product.
Für europäische Anwender
Pour les utilisateurs européens
Only indoor operation is permitted in France.
Para usuarios europeos
Per gli Utilizzatori della Comunità Europea
License required for use in Italy.
Para Utilizadores Europeus
14
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/2 9/ 02
L
Proof Sign-of f:
M.Yamad a CRE Kawa kam i
J.Miya koshi
ed itor na me
For No rth America Users
USA
This product conforms to part 15 of the FCC rules.
EPSON cannot accept responsibility for any failure to satisfy the
protection requirements resulting from a non-recommend ed
modification of the product.
CANADA
This product conforms to IC, Low Power Licence-Exempt
Radio communication Devices (RSS-210).
EPSON cannot accept responsibility for any failure to satisfy the
protection requirements resulting from a non-recommend ed
modification of the product.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device.
15
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/2 9/ 02
L
Proof Sign-of f:
M.Yamad a CRE Kawa kam i
J.Miya koshi
ed itor na me
FCC Part 15 Subpart B Class B
NOTICE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
16
R4CB56
Bluetooth Rev. B
BLUE.FM A5 size
10/29/0 2
R
Proof Sign-of f:
M.Yamad a CRE Kawa kam i
J.Miya koshi
ed itor nam e
Copyrights and Trademarks
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherw i se, without the prio r wr itten permission of SEIKO EPSON
CORPORAT ION . The infor mation contai ned herein is designed onl y for u se w ith t his EPSON
printer. EPSON is not responsible for any use of this inform ation as appl ied to other printers.
Neither SEIKO EPSON CORPORATION nor its affili ates shall be liable to the purchaser of
this product or third parties for damages, losses, costs, or expenses incurred by the purchaser
or third parties as a result of accident, misuse, or abuse of this product or unauthorized
modi fications, repairs, or alterations to this product, or (excludin g the U.S.) failure to strictly
comply wi th SEIKO EPSON CORPORATION 's operating and maint enance instructions.
SEIK O EPSON CORPORATI ON shall n ot be liable for any damages or problems arising from
the use of any options or any consumable products other than those designated as Origi nal
EPSON Products or EPSON Appr oved Products by SEIKO EPSON CORPORATI ON .
SEIK O EPSON CORPORATION shall not be held liable for any damage resulting from
electr omagnetic interference that occurs from the use of any interface cables other than those
designated as EPSON Appr oved Products by SEIKO EPSON CORPORATION.
EPSON is a registered trademark and EPSON Stylus is a trademark of SEIKO EPSON
CORPORATION.
The BLUETOOTH tr ademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to
SEIK O EPSON CORPORATION.
General Notice: Other product names used herein are for identification pur poses only and
may be trademarks of their respecti ve owners. EPSON disclaims any and all righ ts in those
marks.
Copyright © 2003 by SEIKO EPSON CORPORATION, Nagano, Japan.
Loading...