Epson PRO-L1495U Quick Start Guide
Pro L1490U/L1495U/L1490UNL/L1495UNL
Quick Reference
This Quick Reference card gives brief instructions on connecting your
projector and using common features. For details, see the online User’s
Guide.
IMPORTANT: Before using this product, make sure you read these
instructions and the safety instructions in the online User’s Guide.
VGA cable
VGA-to-component cable
Ethernet cable
DVI cable
BNC-to-component cable
HDMI cable
5BNC-to-VGA cable
SDI cable
Stereo mini jack cable
Mini-to-RCA cable
Turning the Projector On
1. Turn on your computer or image
source.
2. Remove the lens cover.
3. Press the On button. After the
status light stays blue, the projector
is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the On button; just
plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the online User’s Guide.
4. If your image does not appear, see
“Switching Between Image Sources”
or “Troubleshooting.”
Changing the Language of the Projector Menus
The default language of the projector’s
menu system is English, but you can
change it as necessary.
1. Press the Menu button to acess the
projector’s menu system.
2. Select Extended > Language.
3. Select your language.
4. When you’re done, press the Menu
button to exit.
Switching Between Image Sources
Press the Search button or one of the
source buttons (remote control), or the
Source Search button (projector).
Selecting the Lens Type
Make sure the Lens Type setting is
correct for the lens you are using.
1. Press the Menu button.
2. Select Extended > Operation >
Advanced > Lens Type.
Note: If the Lens Type setting is greyed
out, the projector has automatically
detected the installed lens and you can
skip the remaining steps.
3. Select the lens you are using.
4. When you’re done, press the Menu
button to exit.
Changing Screen Type
Set the Screen Type setting to the
screen’s aspect ratio.
1. Press the Menu button.
2. Select Extended > Display >
Screen > Screen Type.
3. Select the screen’s aspect ratio.
Note: The displayed image should match
the screen’s size and shape.
Loading...