Epson LS47P2, LS57P2 User Manual
After unpacking your TV and its accessories, follow the steps here to get it set up for viewing High Definition digital
TV broadcasts.
You’ll also find quick instructions for using your TV’s Photo on Demand™system for viewing, printing, and storing
your digital photos.
Make sure these items are included:
Write down the TV’s serial number on the line below. It is located on a sticker on the back left side of the TV.
Serial number __________________________________________
Lifting the TV
When lifting the TV, have two people grasp it as shown, using the two
handles in back and the top of the frame in front.
Warning
The TV is very heavy. Two people are required to lift or move the TV to avoid
injury. Never move the TV and its stand together or the TV may fall and cause
injury or be damaged.
Installing the Set-Top Shelf
The set-top shelf provides a convenient support for a center surround sound speaker or your HDTV tuner on top of
the TV. The shelf can hold up to 11 lb (5 kg).
Caution
Don’t fold the shelf backward on its hinge or it may break.
1 Fold the shelf into an upside-down L-shape with the shorter end on top.
2 Align the holes in the shelf with the holes on the back of the TV.
3 Using a Phillips screwdriver, secure the shelf to the TV with the four screws that came with it.
Tighten the screws.
Selecting a Location and TV Support
Select a suitable location for your TV and follow all of its safety instructions
to ensure it operates safely and effectively, as described in the User’s Guide.
You can use an optional Epson TV stand to support your TV.
Order part number V12H003R03 (for the LS47P2) or
V12H003R02 (for the LS57P2) from your dealer.
If you use your own stand, make sure it can securely support the TV as follows:
Specification LS47P2 LS57P2
Width of the base
(minimum) 47 inches (119 cm) 56 inches (142 cm)
Depth of the base
(minimum) 16 inches (41 cm) 18 inches (46 cm)
Weight capacity
(minimum) 331 lb (150 kg) 331 lb (150 kg)
Place the stand in a location that allows you access to the back of the TV and provides at least
12 inches (30 cm) of room for ventilation at the sides.
You may want to secure the TV to a wall or other support so it stays upright on its stand during
an earthquake or other situation. See your User’s Guide for details.
Quick Setup
Quick Setup
RF IN
L AUDIO R
OUTPUT SWITCH
HDTV LCD Projection Television LS47P2 • LS57P2
• TV
• Set-top shelf with screws
• Remote control with 2 AA batteries
• Package of paper (20 sheets)
• Ink cassette
• CD-R/RW drive with USB cable and power cable
• HDTV tuner, remote control, and User’s Guide
(not available in all locations)
• Component video and audio cables
(for connecting tuner; not available in all locations)
• Documentation kit
Connecting the TV
RF IN
L AUDIO R
OUTPUT SWITCH
Follow these instructions to connect the HDTV tuner and CD-R/RW drive to your TV (tuner is not available in all
locations). For instructions on connecting other equipment, see your TV User’s Guide. Make sure your TV is unplugged
before connecting to it.
Connecting the HDTV Tuner
1 Slide the OUTPUT SWITCH on the back of the tuner to Y Pb Br.
Back of TV
2 Connect one end of the component video cable to the Y (green), PB
(blue), and PR (red) Component Input 1 connectors on the back
of the TV, as shown. Be sure to match the colors of the cables to the
colors of the connectors.
3 Connect the other end of the cable to the Y, Pb, and Pr connectors on
the tuner.
Audio cable
4 Connect one end of the audio cable (with red/white connectors) to the
L–Audio–R connectors on the back of the TV.
HDTV tuner
5 Connect the other end of the audio cable to the L–Audio–R
connectors on the tuner.
6 Connect your antenna cable to the RF IN jack on the tuner.
See the tuner User’s Guide for details.
7 Plug the tuner’s power cord into an electrical outlet.
Connecting the CD-R/RW Drive
Note
The connectors on your CD-R/RW drive may be in different positions than shown.
1 Connect the square end of the included USB cable to the USB port
on your external CD-R/RW drive.
2 Connect the flat end of the USB cable to the EXT. I/F connector on
the back of the TV.
3 Connect the power cable and adapter that came with the
CD-R/RW drive to the drive’s power connector and to an
electrical outlet.
Antenna
cable
Back of TV
Component
video cable
External
CD-R/RW
drive
4 Turn on the CD-R/RW drive by flipping the power switch in back.
Connecting Other Equipment
See your TV User’s Guide for details on connecting other equipment.
Your TV is equipped with a DVI (Digital Video Interface) connector
that lets you display pictures from a digital source (such as a satellite
receiver or DVD player) without signal loss. Use this connection to
obtain the best possible image. If your video equipment does not
support DVI, connect it to one of the ports shown here.
The connectors on the front of the TV also let you connect a PC or
game console, video camera, and headphones.
Installing the Printer Ink Cassette
USB cable
Component
video (best)
S-video
(good)
Composite
video (fair)
1 Press and release the printer cover latch to open the cover.
2 Flip down the printer lock cover and turn the lock counterclockwise to loosen it. It spins freely when
it is unlocked.
3 Grasp the printer handle and pull the printer out as far as it goes.
4 Pull open the ink cover on the side of the printer.
continue
Loading...