Epson ES-1200c Product Support Bulletin

EPSON PRODUCT SUPPORT BULLETIN

Date:
PSB #:
Reference:
Product(s):
Subject:

This bulletin was created to inform you of the part numbers used for the thumbscrews (mounting
screws) that secure the transparency units to the scanner.

Reason:

Epson Customers may need to replace these thumbscrews because they are missing or
misplaced. Epson Dealers and Customer Care Centers may call Technical Support for assistance
in locating the reference or part number for the thumbscrews. The location of the thumbscrews on
the Product diagram is on the right hand side, and is often overlooked (See red box below)

04/07/2003
PSB.2003.04.004
N/A
EPSON Scanner Options
Part numbers for transparency adapter mounting screws (thumbscrews)

Originator:

Authorization:

Total Pages:

TC

1

The correct part and reference numbers for the Expression 1600/1680 Transparency Unit
(B813182) lock-down thumbscrews are respectively: 1012588 and 815. The Parts Price List (PPL)
description is S. THUMB SCREW M4X10 F/NI, Quantity = 2.

Note: The part number is subject to change but the reference number will remain the same.

These screws are used on the following scanners and options: ES-600C/800C/1000C/1200C
options (ADF & TPU), and the Expression 636/800/1600/1680 options (ADF & TPU). The part and
reference number for Expression 1600/1680 Transparency Unit (B813182) can be used to order
replacement thumbscrews for all models and options listed above.

Page 1 of 1

EPSON AMERICA, INC.

Product Support Bulletin

Subject: OS/2 Warp 3.0 and Epson TWAIN
Date: 1/26/95

Page(s): 1 of 4

This bulletin describes the necessary steps to implement the Epson TWAIN driver
in a Windows 3.1 session under OS/2 Warp 3.0. This procedure will cover both
current versions of Epson TWAIN (1.03 and lower as well as 2.02 and higher) using
bidirectional parallel and SCSI interfaces.

NOTE:

TWAIN
use TWAIN 2.02 or higher. If you are using the ES-1200C with a program that has

Epson scanner support, you may need install the EPSN.SYS device driver for that
Windows session. To do this, follow steps 6 through 16 below. You will need to
obtain EPSNSY.EXE from the Epson BBS. This file has the EPSN.SYS driver

included in it. Simply copy the driver to the root directory of your boot drive.

~1.03

and lower will not work with the Epson ES-1200C scanner. You must

PSB No: P-0103A
Originator: CEB

Bidirectional Parallel Interface

Epson TWAIN v2.xx

There is no special procedure required to setup this version of the driver to run in a
Windows session under OS/2 Warp 3.0. Simply launch Windows and install the
driver.

Epson TWAIN

Follow the steps below to enable Epson TWAIN

1.

From the OS/2 desktop, double click on the OS/2 SYSTEM folder

2.

Double click on the COMMAND PROMPTS folder

3.

Double click on the Win-OS/2 icon.

4.

Once Windows is loaded, follow the TWAIN installation procedure. When the
installation program asks if you wish to make changes to the CONFIG.SYS or

the CONFIG.ADD, select CONFIG.ADD.

5.

Once the installation has completed, exit Windows.

6.

If the COMMAND PROMPTS folder is not open, follow steps 1 and 2.

7.

Move the mouse to the WIN-OS/2 FULL SCREEN icon. Click on the right

mouse button.

~1.0~

~1.0~: