SVGA TFT LCD Unit
DM-LR121SV
Copyright© 2000,2001,2003 by Seiko Epson Corporation
Overview
This product an input/output device for IM-310/320. This unit has the
following features:
❏ It displays 800 x 600 dots on the 12.1 type (12.1 inches) color TFT
LCD
2
❏ A high-luminance backlight with 340 cd/m
panel)
❏ Input data by a touching on the touch panel by a finger or exclusive
pen
(except for touch
English
401256005
❏ Water-resistant surface on the touch panel equivalent to IEC 529
IPX1 (JIS C 0920 waterproof Class I)
❏ Slide adjustment for easy positioning of screen viewing angle
❏ MSR unit (DM-MR123) or the 28 keyboard unit (DM-KR028) can be
connected
❏ Power management function can turn off backlight
1
Safety Precautions
This document uses the two headings shown below to call attention to
potential hazards. Failure to observe the information provided under
or alongside these headings may lead to injury or heading damage to
your equipment. Be sure that you understand the meaning of each
heading before you proceed.
WARNING
Indicates a potentially lethal hazard. Failure to observe a
WARNING may result in severe injury or death.
CAUTION
Failure to observe a CAUTION may result in personal injury, or in
damage to equipment or other property.
WARNING
❏ Shut down your equipment immediately if it produces smoke,
a strange odor, or unusual noise. Continued use may lead to
fire or electric shock.
Immediately turn the power off and contact your dealer or a
SEIKO EPSON service center for advice.
❏ Never disassemble or modify this product.
Tampering with this product may result in injury, fire, or electric shock.
❏ Do not allow foreign matter to fall into the equipment.
Penetration of foreign objects may lead to fire or shock.
❏ If water or other liquid spills into this equipment, immediately
turn the power off and contact your dealer or a SEIKO EPSON
service center for advice.
Continued usage may lead to fire or shock.
2
CAUTION
❏ Do not plug in the cables differently to the instructions in this
manual.
Wrong connection may cause equipment damage and fire.
Do not inflict a strong impact by dropping the unit or treating it roughly.
❏
A glass panel may break, and it may cause injury.
❏ Do not place this product in high temperature or high humidity,
and never allow condensation on this product.
Problems could occur such as malfunction or poor display
quality.
❏ This product includes a lamp component that contains mercury
(Hg). Please consult your state and local regulations regarding
disposal or recycling. Do not put in the trash.
EMC and Safety Standard Applied
Product Name:LCD Unit
Type Name: M157A
The product conforms to the following Directives and Norms
Directive:89/336/EEC
EN 55022 Class A
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
English
WARNING
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
3