SVGA TFT LCD Unit
DM-LR121SL
User’s Manual/ /
Copyright© 2003 by Seiko Epson Corporation
404285104
Overview
This product is an input/output device for the IR-310/320. This unit has the following features:
A High resolution display of 800 x 600 dots, using a 12.1" color TFT LCD
Brightness of 120 cd/m2 (except for the touch panel)
Input data by a touching on the touch panel with a finger or exclusive pen
Water-resistant surface on the touch panel equivalent to IEC 529 IPX1 (JIS C 0920 waterproof Class I)
Slide adjustment for easy positioning of screen viewing angle
MSR unit (DM-MR123) or the 28 keyboard unit (DM-KR028) can be connected
Power management function can turn off the backlight
<![endif]>English
1
Safety Precautions
This document uses the two headings shown below to call attention to potential hazards. Failure to observe the information provided under or alongside these headings may lead to injury or damage to your equipment. Be sure that you understand the meaning of each heading before you proceed.
WARNING
Indicates a potentially lethal hazard. Failure to observe a
WARNING may result in severe injury or death.
CAUTION
Failure to observe a CAUTION may result in personal injury or damage to equipment or other property.
WARNING
Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire or electric shock.
Immediately turn the power off and contact your dealer or a SEIKO EPSON service center for advice.
Never disassemble or modify this product.
Tampering with this product may result in injury, fire, or electric shock.
Do not allow foreign matter to fall into the equipment. Penetration of foreign objects may lead to fire or shock.
If water or other liquid spills into this equipment, immediately turn the power off and contact your dealer or a SEIKO EPSON service center for advice.
Continued usage may lead to fire or shock.
2
CAUTION
Do not plug in the cables differently from the instructions in this manual.
Wrong connection may cause equipment damage and fire.
Do not inflict a strong impact by dropping the unit or treating it roughly.
A glass panel may break, and it may cause injury.
Do not place this product in high temperature or high humidity, and never allow condensation on this product. Problems could occor such as malfunction or poor display quality.
This product includes a lamp component that contains mercury (Hg). Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
EMC and Safety Standards Applied
Product Name: LCD Unit |
WARNING: |
||
Type Name: |
M157A |
||
You are cautioned that changes or |
|||
The following standards are applied only |
|||
modifications not expressly approved by |
|||
to the units that are so labeled. |
SEIKO EPSON Corporation could void |
||
Europe: |
EMC: CE marking |
your authority to operate the equipment. |
|
|
<![endif]>English
3