Epson CX9400FAX User Manual

Start Here

Epson Stylus® CX9400Fax Series

1

Caution: Do not open ink cartridge packages until you are ready to install
the ink. Cartridges are vacuum packed to maintain reliability.

If anything is missing, contact Epson as described on the back
in “Any questions?”.

Remove the tape.

Unpack

(Included for Canada only)

2

1 Connect the power cable.

Caution: Do not connect to your computer yet.

2 Press the On button.

Turn on

3

Make settings

1 Select your language and country.

Press or to
select the desired
option.

Press OK when done.

2 For the Daylight Time setting, select Summer if your region uses

Daylight Saving Time and it’s currently in effect. (DST is effective
from spring through summer.) Otherwise select Winter to turn off
the setting.

3 Press or to select the date format, then press .

4 Use the numeric keypad to set the date.

5 Press or to select the time format, then press .

6 Use the numeric keypad to set the time.

7 Press OK when done.

4

Note: Don’t load paper before installing the ink cartridges.

Install ink cartridges

1 Lift up the scanner.

2 Open the cartridge cover.

3 Shake the ink cartridges,

then unpack them.

4 Remove only the yellow tape from each cartridge.

Caution: Don’t remove any other seals from the cartridges.

5 Insert the cartridges in the

holder for each color.

6 Press the cartridges down until they click.

7 Close the ink cartridge cover and press it

down until it clicks.

8 Close the scanner.

9 Press the OK button to

charge ink. Charging
takes about 2 minutes.

Caution: Don’t turn off
the CX9400Fax Series
while the ink system
is initializing or you’ll
waste ink.