Epson CX7800 User Manual

Start Here

Epson Stylus®CX7800

1

Remove all the tape.

Epson Stylus CX7800

If any of these parts are missing, contact Epson®as described on the back
of this sheet.

Unpack

4 ink cartridges

Film holder

(see the Basics Guide

for storage instructions)

Power cord

Basics Guide

Software CD-ROM

Photo Projects

Made Easy

2

1 Lift up the scanner.

2 Remove the tape from the ink cartridge holder.

Unlock the Printer

3 Close the scanner.

3

Turn On the Epson Stylus CX7800

1 Connect the power cable.

2 Press the On button.

4

Note: Don’t load paper before installing the ink cartridges.

1 Lift up the scanner.

2 Open the ink cartridge cover.

Install Ink Cartridges

3 Shake the ink cartridges, then unpack them.

4 Insert the cartridges in the holder for each color.

5 Press the cartridges down until they click.

6 Close the ink cartridge cover and press it down until it clicks.

7 Close the scanner.

8 Press the Start button to charge ink. Charging takes about

2 minutes.

Caution: Don’t turn off the Epson Stylus CX7800 while the On light is
flashing or you’ll waste ink.