CX7000F
Table of contents
Loading...
*410923300*
*410923300*
Start Here
Epson Stylus® CX7000F Series
1
If anything is missing, contact Epson® as described on the back in
“Any Questions?”.
1 Remove all the tape on the outside.
Unpack
2 Lift up the scanner.
3 Remove the tape from the ink cartridge holder.
4 Close the scanner.
2
1 Connect the power cable.
2 Press the On button.
Turn On the CX7000F Series
3 You see Region on the display screen. Press the
Start Color/OK button.
4 You see USA. Press the Start Color/OK button.
5 You see Date/Time. Press the Start Color/OK button.
6 Use the number keys to enter the month, day, and year.
Press the Start Color/OK button.
7 Use the number keys to enter the hour and minutes.
Press the Start Color/OK button.
8 Press 1 to select AM or press 2 to select PM.
9 You see No Cyan Magenta Yellow Black. Press the
Start Color/OK button.
3
Caution: Do not open ink cartridge packages until you are ready to install
the ink. The ink cartridges are vacuum packed to maintain reliability.
Install Ink Cartridges
Note: Don’t load paper before installing the ink cartridges.
1 Lift up the scanner.
2 Open the ink cartridge cover.
3 Shake the ink cartridges, then unpack them.
4 Remove the yellow tape from each cartridge.
Caution: Don’t remove any other seals from the cartridges.
5 Insert the cartridges in the holder for each color.
6 Press the cartridges down until they click.
7 Close the ink cartridge cover and press it down until it clicks.
8 Close the scanner.
9 Press the Start Color/OK button to charge ink. Charging takes
about 2 minutes.
Caution: Don’t turn off the CX7000F Series while Charging appears
on the display screen.
Note: The first time you install ink cartridges, the printer uses some
ink to charge the printing system, so print yields may be lower with
the first cartridges. Subsequent ink cartridges will last their full rated
life.
Loading...