Color Laser Printer
Paper Jam Guide
Jam A
Warnings must be followed
carefully to avoid bodily injure.
w
Notes: Contain information and useful tips on the operation of your printer.
When the LCD panel displays the Paper Jam XXX error message, choose the appropriate
description to clear the jammed paper.
For more information, see the Online User’s Guide.
Cautions must be observed to avoid
damage to your equipment.
c
1
2
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
3
4
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
Note:
Make sure to place the photoconductor
unit on the flat surface as shown below.
5
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
Caution:
Do not touch the rollers inside the
c
printer.
6
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
7
Jam A B
1
2
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
3
4
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
Note:
Make sure to place the photoconductor
unit on the flat surface as shown below.
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
Caution:
Do not touch the rollers inside the
c
printer.
6
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
8
9
10
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
5
7
Jam C A
1
Remove the paper set in the MP
tray. If the paper is jammed in the
MP tray, gently pull out any sheets
of paper with both hands.
2
Note:
The illustration shows the standard
lower cassette. If the optional paper
cassette unit is installed, check the
unit's cassettes in the same way.
3
Note:
Confirm that the jammed paper is not
still deep inside the printer.
4
5
6
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
7
8
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
Note:
Make sure to place the photoconductor
unit on the flat surface as shown below.
9
10
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
Caution:
Do not touch the rollers inside the
c
printer.
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
Continue to the next page
Jam C A Jam B Jam C A B
When transparencies are
11
Note:
When a paper jam occurs repeatedly at
the paper cassettes (Jam CA or Jam
CAB), jammed or crumpled paper may
still be inside the paper cassettes.
Remove the paper cassettes, then open
the green unit that is located on the top
part of the inside of the casse tte slot, and
check whether any jammed paper is
there. Before reinstalling the paper
cassette, make sure to close the green
unit completely, otherwise you may
damage the printer.
1
2
Note:
Be sure to remove the jammed paper by
pulling it upward.
Warning:
Be careful not to touch the fuser,
w
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
To clear the paper jam, first clear at
Jam CA, and then clear at Jam B.
jammed at the MP tray
Remove the paper from the MP tray
and remove any jammed paper. Open
cover A, check that no jammed paper
is left inside the cover, and close the
cover to clear the message on the LCD
panel. Then reload the paper. The
printer resumes printing from the
page that jammed.
Note:
❏ When using transparencies, load them
in the MP tray and set the Paper Type
setting to Transparency in the
printer driver.
❏ When the Paper Type setting in the
printer driver is set to
Transparency, do not load any other
type of paper except transparencies.
3
Copyright© 2005 Seiko Epson Corporation. All rights reserved.
Loading...