Paper setting
quantity30 sheets (55 g/m2 paper, maximum total
thickness under 6 mm)
Reliabilityload/eject:
(mean cyclesplain paper sheets - 20,000
between failure)transparency film - 10,000
hinge: 12,000 cycles
Electrical
Input voltage24-26.4 VDC
Input current0.8 A
Note: Optional ADFs sold outside the US market may operate at a
different voltage. Check the label on the back of the scanner for
voltage information.
Environmental
TemperatureOperation: 50 to 90 °F (10 to 32 °C
Storage: -4 to 140 °F (-20 to 60 °C)
HumidityOperation: 20 to 80%
(withoutStorage:10% to 85%
condensation)
AC Adapter
Input100-120 VAC, 50 to 60 Hz
Output24.0-26.4 VDC, 1.1 A
Transparency Unit
The transparency unit (film adapter) is built into the scanner
lid.
ElectricalSupply voltage: DC 24.0 to 26.4 V
Rated current: 0.5 A
Document Positive or negative film in these sizes:
specifications35 mm strips
35 mm slides
120/220 (6 × 9-cm) film
Readable area2.6 × 9.1 inches (66 × 231 mm)
2 - EPSON Perfection 31708/03
How to Scan
The ] Start button on your scanner automatically opens the
EPSON Smart Panel, making it easy for you to scan your
images for many different uses. Here’s how you can use the
] Start button and Smart Panel to scan photos and save them
as files.
1. Raise the scanner cover and place your photo face down on
the glass. Make sure the top right corner of the photo is
aligned with the top right corner of the scanner.
Then close the cover.
EPSON Perfection 3170
2. Press the ] Start button on your scanner.
Note: In Windows XP, you will see a message the first time you press
5. When you see the following screen, select a location and file
type for your scanned image, then click
Specify the path to the folder
where you want to save your
scanned image
Select a
file format
Save.
Starting a Scan
You can start a scan in several different ways:
❏ You can use the scanner buttons. Press the button for the
type of scan you want. Smart Panel automatically opens and
scans your documents. Then follow the easy on-screen
instructions to finish your task.
Note: If you are using Windows XP, you will have to select EPSON
Smart Panel and Always use this program for this action the
first time you press each of the buttons.
3. Click the
Scan and Save icon.
A progress meter appears on the screen and your photo is
automatically scanned. After your photo is scanned, the
View Image screen opens.
4. Click
Next to continue.
Scan to
Web
Scan to
E-mail
Copy
Start
❏ You can start Smart Panel by clicking the icon on your
desktop, and use it to perform various types of scans.
❏ You can start EPSON Scan from Adobe Photoshop
Elements or any other TWAIN-compliant program. You
can also start the EPSON Scan program directly from your
computer.
8/03EPSON Perfection 3170 - 3
EPSON Perfection 3170
Selecting the Scanning Mode
EPSON Scan has four scanning modes:
Choose your
scanning
mode
❏ Full Auto Mode for automatic control of scan settings.
❏ Home Mode for scanning film and more control over scan
settings, including Color Restoration.
❏ Office Mode for scanning text and multiple pages (available
only if the optional automatic document feeder
[B12B813341] is installed).
❏ Professional Mode for full control over all scan settings.
To change the scanning mode, choose the mode you want to
use from the list box at the top right of the window.
To change settings in Full Auto Mode, click the
then click
Options. If you’re using Home, Professional, or
Office Mode, the options window automatically appears. Then
select the settings you want to use for your scan.
Note: The selected mode and settings remain in effect until they are
changed.
Pause button,
Restoring Color in Photos
If you have faded photos or negatives, you can use the Color
Restoration setting in your software to improve the color of
your scan. You can select this setting in Smart Panel or in
EPSON Scan.
Smart Panel
To select the Color Restoration setting, open Smart Panel and
select
Color Restoration icon. (It is highlighted in blue when it is
selected.)
RePrint Photo. You see the screen below. Click the
Click Color
Restoration
Click here to
scan and print
4 - EPSON Perfection 31708/03
EPSON Perfection 3170
EPSON Scan
Color Restoration is available in Home and Professional Modes.
1. To select Color Restoration, start EPSON Scan. You see a
screen similar to this.
Click Color
Restoration
3. Follow the instructions for the type of film you are
scanning:
If you are scanning 35 mm film or negative strips or
medium-format (120/220) transparencies, slide the film
into the corresponding holder, with the film’s shiny side
facing down.
35 mm film or negative strips
Cover tab
Medium-format
transparencies: Slide the
film into the holder as
shown. Then lower the
cover and press the tab to
lock it in place.
2. Click the
3. Select the
Preview button at the bottom of the screen.
Color Restoration checkbox. (If you’re using
Professional Mode, you may need to scroll to the bottom of
the screen.)
Scanning Film and Transparencies
The scanner cover has a built-in transparency unit (film
adapter). To scan film or negative strips, slides, or
transparencies, you need to remove the document mat from the
scanner cover and insert the film in a holder.
The scanner comes with 3 different film holders: one for 35 mm
film or negative strips, one for 35 mm slides, and one for
medium-format (120/220) transparencies.
1. Make sure the film adapter cable is connected to
the scanner (see the Start Here sheet for instructions).
If you need to connect the cable, first turn the
scanner off. Then turn it back on again after
you connect the cable.
2. Lift the scanner cover all the way up and slide
the reflective document mat up and off of the
scanner cover.
Place the film holder on the scanner as shown. Make sure
the white triangle on the holder points to the upper-right
corner of the scanner.
Make sure this
calibration space
is uncovered
8/03EPSON Perfection 3170 - 5
EPSON Perfection 3170
If you are scanning slides, place the holder on the scanner.
Then place the slides in the holder. (Place the slides so the
“this side to lamp” indication is facing down.)
4. Close the scanner cover.
5. Start EPSON Scan and make sure the correct Document
Type is selected: either Color Negative Film, B&W
Negative Film, or Positive Film (for slides and
transparencies).
Indicator Light
The indicator light (on the ] Start button) indicates the status
of the scanner, as described below.
LightColor Status
OnGreen The scanner is ready to scan images.
FlashingGreen The scanner is initializing (warming up) or is
busy scanning.
FlashingRedCheck the following, then turn your
scanner off and back on to reset it:
❏ Make sure the transportation lock is
turned to the unlocked position. See
the Start Here sheet for details.
❏ Try restarting your computer and
turning the scanner off and then on
again.
If this does not eliminate the error, the
fluorescent lamp may need to be replaced
or the scanner may have another problem.
Consult your dealer or EPSON.
Off—The scanner is unplugged or turned off.
Related Documentation
Select Dust
Removal
Tip:Make sure your film is dust-free for the best scan. You can also
select the Dust Removal setting in EPSON Scan, as shown
above.
CPD-16343EPSON Perfection 3170 Photo Start Here
poster
CPD-16345EPSON Perfection 3170 Scanner Software
CD-ROM
CPD-16344EPSON Perfection 3170 Notices booklet
—Reference Guide (HTML)
6 - EPSON Perfection 31708/03
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.