Page 1
Datasheet
• Airport Terminals
• Rail Station
• Stadiums & Arena
• Warehouse Operations
• Shopping Malls
• Medical Centers
• College classrooms
• Resort Properties
• Luxury homes & Estates
• Corporate workspace
SkyKey Series
SkyKey I
Cloud Access or Local
Access Management
The SkyKey series solution can be applied to manage
EnGenius Wireless Access Points and switches from both
remote and local sites intuitionally and easily. The solution
is also supported to power by either 802.3af/at PoE
(Power Over Ethernet) or DC12V power.
EnGenius Wireless Management system is a flexible, robust, and
affordable solution designed for deploying on the versatile
application which could handle multi-requirements to fulfill
customers’ desire from pro-users to large scope deployment under
a corporate easily and intuitionally.
The simple and edge design could realize plug and play easily
without complicated installation on your personal computers or
servers. SkyKey series can be worked with EnGenius PoE switches
or other ones throughout Ethernet, as well as stacked on rack or
desktop easily.
Features & Benefits
• Built-in Qualcomm Quad-core CPU with supporting powerful
computing for driving and boosting performance effectively.
• Compliance with 802.3af/at or DC12V Input power source.
• 2 x 10/100/1000 Mbps Ethernet ports that use to network
with switches or servers easily.
• Expanding Micro SD slot for backing up configurations of
this SkyKey.
• Built-in management soſt ware to organize systemic and
distributed managerial system for controlling 100 sets of
EnGenius Access Points and switches directly.
• Built-in 1GB DRAM and 4GB eMMC flash storage to control
and to manage statistical information up to 7days.
Wireless Management solution is ideal for deployment in these venues:
1
Page 2
Hardware Specification
CPU:
Model: Qualcomm IPQ4019
Architecture: 32-bit
Clock Rate: ARM A7 Quad Core 717MHz
Hardware Encryption Acceleration: Yes
Memory:
System Memory: 1GB DDR3
Storage:
eMMC: 4GB (MLC)
Interfaces and LEDs
2 x 10/100/1000 Mbps RJ45 ports (1 x PoE) 1 x Micro
SD Slot
1 x DC-Input Jack
1 x Reset Button
1 x Power LED (Orange)
2 x LAN LED (Green)
Mechanical & Environment
Dimension
100x59x23mm
Weight (Without accessories)
79g
Operating:
Temperature: 0°C~40°C (32°F~104°F)
Humidity: 0%～90% typical
Storage:
Temperature: -40°C~80°C (-40°F~176°F)
Humidity: 0%～90% typical
Compliance Regulatory
FCC
Subpart15 B
CE
EN 55032
EN 55035
Low Voltage Directive 2014/30/EU
Mounting
Wall Mounting
Mount Access Point on a flat wall via included
accessories
Magnets
Magnets in bottom to cling to metal surfaces
Controlling capability
Managing Qty of Access Points
Maximum 100 pcs of EnGenius Access Points and
switches
Reserving duration of managerial data
Maximum 7 days if users control and manage 100pcs
of Access Points and switches on a SkyKey solution.
Dashboard
Managed Access Points / Switches
Users can realize status of Access Points and Switches
System Resource Usage
CPU: Usage (%) of CPU for this SkyKey
Memory: Usage (%) of Memory for this SkyKey
Disk: Usage (%) of Disk for this SkyKey
System Overview
Users can realize ezMaster software version on this
SkyKey
Recent Projects
Updated or revised projects are listed in the right side
bar.
Global Settings
Account Management (Multi-Tenant)
Master: A supervisor user can be considered as a
under a Skykey.
Users: Master can assign one of users to a project.
well as block/allow client devices to access Internet.
Guests
any information, except for configuration.
E-Mail Alert
Provide a network monitoring tool for administrators to
stay informed the configuration change.
Backup/Restore
Backup overall setting of a ezMaster account under this
one ezMaster easily.
Option 1: Backup configure files to SkyKey.
Option 2: Backup config files to Micro SD card. The
maximum sets of saved config files is 5.
Reboot/Reset SkyKey
Reboot this ezMaster under this SkyKey.
Reset all configuration to default value on this SkyKey.
Background Scanning
Regular scanning signal level of an environment to
power and auto channel.
Diagnostic
Enable this function to detect the connecting status of
this ezMaster under the SkyKey.
Auto Transmit Power
Automatically adjust power level when EWS access
points work at an environment.
Auto Channel
Automatically assign a clearly channel to perform RF
transmission under a pervasive environment.
Software Update
Update ezMaster under this SkyKey throughout
throughout one-click-update function
Inventory
Put AP to this SkyKey inventory list before managing.
Points and switches.
Scheduler Settings
Reboot: Reboot Access Points under a project at a time
for every weeks or specified days.
Scheduler for SSIDs: Enable this function to allow one
of SSIDs for enabling during a session or days of week.
Finger Printing
The value added solution collect information of client
receiving data, and signal level.
Cluster Setting (Group Setting)
SSID Setting
Support 8 SSIDs on both 2.4GHz and 5GHz radios
Users can consider to enable either 2.4GHz or 5GHz
SSID.
Hidden SSID in beacons
Hide this SSID to avoid users for finding it.
VLAN Per SSID
Integrate VLAN ID with a SSID interface to forward
packets over the defined path.
Fast Roaming (802.11k)
Collect parameters of neighborhood Access Points to
transition key to handover between AP.
Band Steering
Steer client devices to a proper frequency band for
Point.
NAS IP
The NAS IP address to be sent in RADIUS packets from
that server.
NAS ID
It is primarily used to notify the source of RADIUS
Policy for that request.
NAS Port
Assign a port to be sent in Radius packets from that
server.
Wireless Encryption Standard
WPA3/WPA2 AES
WPA3/WPA2 Enterprise (WPA-EAP AES)
* WPA3 will be supported in Q3, 2019.
L2 Isolation
Block the communication between the associated
on the same subnet.
Technical Specifications
manually update Update ezMaster under this SkyKey
The maximum Qty is supported up to 100 Access
master which can implement any managerial behavior
Users can edit, manage, remove, Add Access Points, as
: Master can assign one of guests to a
specified project. Under this project, a guest can review
SkyKey. Users can restore this settings/configuration to
devices including name of devices, IP address, MAC
address, Operating system version, transmitting and
radios’ interfaces, as well as enable both radios under a
find the optimal AP, then client devices will use a fast
getting more bandwidth and speed under an Access
access request so that, the RADIUS server can choose
provide parameters for performing Auto Transmit
clients to communicate with other clients from all hosts
Page 3
Scheduler Settings
Reboot: Reboot Access Points under a project at a time
for every weeks or specified days.
Scheduler for SSIDs: Enable this function to allow one
Whited List/Blocked List per SSID
Whited List: Enable a list to allow client devices for
accessing to this SSID.
Blocked List: Enable a list to block client devices for
accessing to this SSID.
Captive Portal (NAT / Bridge mode)
Differentiate the authority of users on using Internet
access
MAC Address Filtering
Filter up to 32 sets of MAC addresses per SSID
Traffic Shaping
Controls the bottle of bandwidth to offer the limited
Access Point.
Monitoring
Rogue AP Detection
Enable the function to detect the fake access points in
the environment.
Active Clients
The page will show clients’ information including client
Tx, Rx, and RSSI information.
Statistic Information
Access Point
Top ten traffic for the Managed AP. We can reserve
data up to 7 days.
Wireless Client Information
Top 100 traffic for wireless client devices.
Visualization
Topology View
Topology view could assist users to realize status of
EnSky switch.
Map View
Enter this view to find locations of Access Points or
filter one of APs from google map easily.
Floor Plan View
Upload a floor plan for this project. Users can put a
switches on this view.
Mesh View
Mesh view also can be realize the overall topology for
mesh.
Hotspot Service
Captive Portal profile setting will be set a profile to
redirect page types and redirect behavior
System Overview
Users can realize ezMaster software version on this
SkyKey
Recent Projects
Updated or revised projects are listed in the right side
bar.
Maintenance
Bulk Update
Throughout this function to proceed mass upgrade
procedure on a specific AP.
Bulk Update (Switch)
Throughout this function to proceed mass upgrade
procedure on a specific switch.
AP Remote Log
Synchronize clients’ information of AP to a remote log
server.
EnGenius Networks Europe BV
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range
of SSIDs for enabling during a session or days of week.
bandwidth for an individual SSID or each client per
your network and then find abnormal devices for
trouble shooting easily, when using in combination with
switches on global view of google map. You may also
known floor plan and then place Access Points or
name, getting IP, MAC address, Client OS*, SSID, Band,
apply on one of SSIDs. Users can configure
authentication types, session of connecting clients,
Fellenoord 180, 5611 ZB Eindhoven - Nederland
Email: sales@engeniusnetworks.eu | Phone: +31 40 8200 888 |
Website: engeniusnetworks.eu
Version 20190827EU
may vary depending on distance between devices or traffic and bandwidth load in the
network. Features and specifications subject to change without notice. Trademarks and
registered trademarks are the property of their respective owners. All rights reserved.
Loading...