EnGenius EWS385AP Quick guide
Package Contents
Managed Access Point Installation with Wireless Management Switch
Quick Installation Guide
Tri-Band Wireless Indoor Access Point
Management Switch Setup
3
A)
Open a web browser on your computer. In the address bar of the web
browser, enter 192.168.0.239 and enter.
B)
A login screen will appear. By default, username is admin and the
password is password. Enter the current username and password of
the Wireless Management Switch and then click Login.
*
Your model number may be
different in the web browser
interface.
EWS385AP
version l.0
Quick Installation Guide
Minimum Requirements
+
Broadband Internet Service
(Cable or DSL Modem)
+
Internet Browser
(Internet Explorer, Safari, Firefox, Chrome, Edge)
+
EnGenius Wireless Management L2 Switch
(To use with EWS Series Management Switches)
Adding Managed AP
4
(Through EnGenius Wireless Management Switch GUI)
A)
All Managed AP(s) connected to the same network as the Wireless
Management Switch will appear on the right side of the screen, under
the Access Point AP(s) Detected list. Locate and select the Managed
AP by checking the box and click Add to manage the device.
EWS310AP
88:DC:96:0D:C6:E0
EWS320AP
88:DC:96:01:9B:86
Connecting the Access Point
1
(Through EnGenius Wireless Management Switch)
A)
Connect one end of the Ethernet Cable into an Ethernet Port on the front
panel of t he EnGenius Wireless Management Switch and the other end to the
Ethernet Port on the computer.
B)
Connect another Ethernet Cable into the LAN Port of the Managed AP
and the other end to the Ethernet Port on the Wireless Management Switch.
With the Wire less Mana gement Switches, the Managed AP is able to obtain
proper assigned IP address for further configurations.
Configuring Managed AP
5
(Through EnGenius Wireless Management Switch GUI)
Confi gure Managed AP(s) through the GUI interface from the switch for
A)
WLAN settings under Device Management. Click the “Device Name” in
order to confi gure your Managed AP.
EWS310APOnline
88:DC:96:0D:C6:E0
EWS320APOnline
EWS375AP
88:DC:96:01:9B:86
EWS310AP
EWS310AP
Add Managed AP(s) to specifi c AP Cluster to save repetitive configuration
B)
tasks.
192.168.0.12
EWS310AP
192.168.0.11
EWS375AP
EWS320AP
IP Address Configuration
2
A)
Once your computer is on, ensure that
your TCP/IP is set to On or Enabled.
Open Network Connections and then click
Local Area Connection. Select Internet
Protocol Version 4 (TCP/IPv4)
B)
If your computer is already on a network,
ensure that you have set it to a Static IP
Address on the interface.
(Example: 192.168.0.88 and the Subnet
Mask address as 255.255.255.0.)
C)
Users may create several clusters simultaneously to accommodate
their deployments under AP Clusters.
88:DC:96:0D:C6:E0
D)
For distinct settings, EnGenius Wireless Management switches still
off er individual Managed Access Point customization for cluster
members such as diff erent channels that best adapt your local WLAN
deployments.
C)
The EnGenius Wireless Management Switch User Interface will appear.
Make sure the Controller State is set to Enabled.
EWS310AP
EWS320AP
You may confi gure your Managed AP(s) after you successfully
B)
connected to the Wireless Management Switch through its GUI.
88:DC:96:0D:C6:E0
88:DC:96:01:9B:86
EWS310AP
EWS320AP
192.168.0.12
192.168.0.11
EWS310AP
Stand-alone Access Point Installation
Connecting the Access Point
1
A)
Connect one end of the Ethernet cable into the LAN port of the
Access Point and the other end to the Ethernet port on the computer.
B)
Connect the Power Adapter to the DC-IN port of the Access Point and
plug the other end into an electrical outlet.
Note: The Access Point supports both IEEE 802.3at PoE ( Power over
Ethernet ) or the included power adapter. You may use either one as the
power source. DO NOT use both at the same time.
Technical Support
Country of Purchase Service Center
North America
www.engeniuscanada.com
www.engeniustech.com
Canada
Los Angeles, USA
Service Information
rma@engeniuscanada.comToll
Free: (+1) 888 397 2788Local:
(+1) 905 940 8181
support@engeniustech.comToll
Free: (+1) 888 735 7888Local:
(+1) 714 432 8668
IP Address Configuration
2
Once your computer is on, ensure that
A)
your TCP/IP is set to On orEnabled.
Open Network Connections and then
click Local Area Connection. Select
Internet Protocol Version 4 (TCP/IPv4).
If your computer is already on a
B)
network, ensure that you have set it to
a Static IP Address on the interface.
(Example: 192.168.1.10 and the
Subnet Mask address as
255.255.255.0.)
Notes
Access Point Setup
3
A)
Open a web browser on your computer.
In the address bar of the web browser,
enter 192.168.1.1 and enter.
B)
A login screen will appear. By default,
the username of the Access Point is
admin and the password is admin
Enter the current username and
password of the Access Point and
then click Login.
C)
The EnGenius Access Point User Interface will appear. This device
can operate in Access Point operating mode.
EWS385AP
Tri RadioAP+2T2R, 400Mbps+867Mbps+867Mbps
* Your model number may be diff erent in the web browser interface.
.
EWS385AP
EWS385AP
Europe
www.engeniusnetworks.eu
Africa
CIS
Middle East
Russia
www.engenius-me.com
Asia
Oceania
www.engeniustech.com.sg
Others
www.engeniusnetworks.com
Netherlands
Dubai, UAE
Singapore
Taiwan, R.O.C
support@engeniusnetworks.eu
(+31) 40 8200 887
support@engenius-me.com
Toll Free:
U.A.E.: 800-EnGenius
800-364-364-87
General: (+971) 4 357 5599
support@engeniustech.com
Toll Free: (+1) 888 735 7888
Local: (+1) 714 432 8668
technology@senao.com
Maximum data rates are based on the IEEE standards. Actual throughput and range may vary depending on
many factors including environmental conditions, distance between devices, radio interference in the
operating environment, and mix of devices in the network. Features and specications subject to change
without notice. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Trademarks and
registered trademarks are the property of their respective owners. For United States of America: Copyright
©
2019 EnGenius Technologies, Inc. All rights reserved.
Loading...