Eneo HDR-5004AH1.0 User Manual

Digital Video Recorder

User s Manual

’

HDR-5004/5008/5008R/5016

Thank you for using our product.

1. This is user's manual for H.264 HD DVR (Digital Video Recorder).

2. This manual contains product specification and introduction, installation guide, operating guide and other necessary matters for easy understanding. Users should read this user's manual carefully for proper use.

3. Contents in this manual may be changed according to the specification change and f t i t ith t tifi ti

feature improvement without any notification.

4. This user's manual shall never be copied without prior agreement and violating this may be a reason for legal punishment on piracy.

CONTENTS

2-2-2. Connecting External Device

3-2-1. Li

3-4. Se

tup Mode

5. Firmware Upgrade

Contents

CH 1. Product Introduction

1-1. Product Contents 5 1-2. Specifications 7 1-3. Product Characteristics 8 1-4. Name of Each Part 10

CH 2. Installation Guide and Cautions

2-1. Cautions 16 2-2. Product Installation 19

2-2-1. Power Connection 19

CH 3. How to Use

3-1. General Usage Information 22 3-2. Live Mode 23

ve mode contro

3-2-2. Live mode feature 25

3-3. Search Mode 30

3-3-1. Search selection type 30 3-3-2. Play mode 34

3-4-1. Display 35 3-4-2. Record 37 3-4-3. Device 42 3-4-4. Network 49 3-4-5. System 52

CONTENTS

Appendix D

How to Connect POS

Contents

T rouble Shooting 58

Appendix A Connecting using Web browser 59

Appendix B Catcheye for Android mobile 62

Appendix C Catcheye for iPhone 68

CH 1 Product Introduction

pppp p

CH1. Product Introduction

1-1. Product Contents(HDR-5004/5008)

After removing packing materials of this product, check whether all following contents are included.

Main Body (DVR):

This converts the analog video and audio signal to the digital signal and saves on HDD.

Adapter:

This 12V ada

ter supplies power to the product.

Power Cable:

This connect the adapter and the power source.

ram CD:

Pro

This contains the User’s manual and Client Program for DVR.

Remote Controller:

This is an IR remote controller for convenience.

Battery:

These are 2(two) battery for the remote controller.

CH 1 Product Introduction

This 12V adapt

1-1. Product Contents(HDR-5008R/5016)

After removing packing materials of this product, check whether all following contents are included.

Main Body (DVR):

This converts the analog video and audio signal to the digital signal and saves on HDD.

Adapter:

er supplies power to the product.

Power Cable:

This connect the adapter and the power source.

rogram CD:

This contains the User’s manual and Client Program for DVR.

Remote Controller:

This is an IR remote controller for convenience.

Battery:

These are 2(two) battery for the remote controller.

CH 1 Product Introduction

Model

Embedded Li

NTSC

60fps@1080

120fps@1080

Backup

POS Interface

1-2. Specifications

HDR-5004 HDR-5008 HDR-5008R HDR-5016

Camera input 4 BNC 8 BNC 8 BNC 16 BNC

Video

Audio

Sensor In 4 (NC, NO selectable)

Alarm out 1 relay 6 TTL, 2 relay 14 TTL, 2 relay

perating System

Display

Recording

Playbac

Network

The number of HDD

Function

Individual HD/Analog selectable All Hybrid(Patent Pending)

Available source 720p25,30,50,60/1080p25,30,50,60/1080i50,60/Composite/960H/Mixed

Output 1 HDMI+1 VGA (simultaneously) / 1 Programmable SPOT with OSD Audio input 4 RCA 8 RCA 16 RCA Output 1 RCA

Speed Real Time Resolution (Pixel) 1280X1024, 1280X720, 1920X1080 Split screen 1,4 1,4,8 1,4,8 1,4,6,8,9,13,16 CODEC H.264 / JPEG for 3G, Dual CODEC Resolution (Pixel) 720p, 1080p,1080i, 960H, 720H, Mixed Picture quality 4 steps (Super, High, Medium, Low)

Speed

Display 1,4 1,4,8 1,4,8 1,4,6,8,9,13,16 Search mode Calendar, Event ,POS , Panorama, Thumbnail

Speed

Fast/Slow speed

Network Interface Gigabit Ethernet

Speed 60fps@1080p 60fps@1080p 120fps@1080p

Protocol TCP/IP, HTTP, DHCP Application Windows 2000 / XP / Vista / 7 / 8 (PC Client system& IE)/MAC Web Browser Internet Explorer

Smart phone App Android, iPhone for live and search Interface USB 2.0 X 2 USB 2.0 X 3

Backup device External HDD, CD&DVD-RW, Network, Thumb Drive

•Full GUI with alpha blending

•Individual setting of resolution, frame rates and picture quality

•Instant Replay

•Digital Zoom

•Mouse Control

•Weekly scheduler with holiday by 10 minutes setting

•Covert, Disable and Private function of cameras

•Motion Detection with 352 area setting

•Relay alarm output

•PTZ control by RS-485

•Daylight Saving Time and Network Time Setting

•Multi User Authority up to 8 Users Deinterlacer upon live and playback

•12 languages with full graphic

•Individual Network port setting

•Auto Deletion

•Import and Export the configuration Mirroring

NTSC area

PAL area

area

PAL area

120fps@1080p 100fps@1080p

100fps@1080p

Normal, REW & FF [recorded speed x2, x4, x8, x16,x32,x64,x1/2,x1/4], Frame

2 SATA(No capacity limit ; 4TB of more)4 SATA + 1 eSATA(upto 12 bays, No

Compact type 19” rack type

8(NC, NO selectable)16(NC, NO selecta

nux

240fps@1080p 200fps@1080p

200fps@1080p

to frame, Pause

240fps@1080p 200fps@1080p

200fps@1080p

capacity limit ; 4TB or more)

480fps@1080p 400fps@1080p

200fps@1080p

ble)

Others

•Dual CODEC engine for independent video transmission

•Interactive setup via network Power Consumption 50W 150W

Operating Temperature 5 ~40℃(41~104F)

Relative Humidity Maximum 80% non-condensing

Dimension 340(W)×250(D)×60(H) mm 430(W)×420(D)×88(H)

CH 1 Product Introduction

)

With Embedded hardware and software design, this maintains higher product

Pentaplex

System allows live, recording, backup, networking and playback

With using exclusive line or Internet network, you can search or monitor recorded

1-3. Product Characteristics

1) Full HD real time and All Hybrid

This DVR can record HD and Full HD video with extreme quality. Also it displays real HD(1920X1080) resolution, and therefore it provides the most clear image quality and the best security level. Furthermore, HDR series can mix any input such as analog, 960H and HD-SDI. All video input is detected automatically. (Patent Pending)

2) High reliability

reliability.

3) Simple usage

This allows users to use it conveniently by placing control buttons similar to existing

ones on VCR, and users can easily learn the usage.

4) Pentaplex System

simultaneously.

5) Selectable recording setup

For recording methods, users can select the frame rate, resolution and video quality individually in order to be appropriate for user's environment.

6) Remote monitoring

images remotely by installing exclusive client program on Windows PC or Mac.

7) Backup

You can backup with a versitile external USB devices.

8) Audio recording

You can record 4 sound inputs simultaneously. Moreover, you can listen to the sound in search and live monitoring and play mode.

9) Various recording methods

This provides convenient use with manual recording, recording by dates and days, hourly schedule recording, sensor and motion detection event recording and others to enable unmanned monitoring.

10) Various total monitoring features

You can cover any security scenario through various sensor inputs and contact output control.

CH 1 Product Introduction

Thi

11) Display information in easy-to-understand information method

s enhanced convenience of user by displaying information (date, time, recording method, recording frame number, HDD capacity and others) in monitoring, recording and playing mode in easy-to-understand way.

12) P/T/Z control

By built in RS485, various P/T/Z cameras can be used.

13) Dual CODEC for video transmission

DVR can send 120 fps (based on CIF) regardless of the local recording and viewing setup regardless with recording setup.

14) Web browser support

You can monitor and playback the video and control the PTZ camera by internet explorer.

15) Built in S.M.A.R.T.

You can automatically check the health of the hard disk drives.

16) Language pack

Basically DVR has multiple language set, furthermore you can choose the language set if you want.

17) Mirroring by internal HDD

If you install two HDDs, you can use the second HDD for backup for maximum fault tolerance.

18) Spot monitoring

Spot out can be enable to monitor sequentially in other place.

19) Touch LED Switch

You can operate with touch LED switch in front panel.

20) Text inserter(POS Interface)

You can operate with the POS and ATM.

1-4. Name of Each Part

NETWORK

[Front Panel]

<HDR-5004, HDR-5008>

1. IR Window : the window for remote controller

CH 1 Product Introduction

3. STATUS RAMPS

1. IR WINDOW

2. USB

2. USB ports : These USB ports are for mouse and USB devices. You should

connect correctly the USB devices and mouse as picture directed.

3. Status lamps

POWER : Blue color back light. Power indicator. RECORD : Red. Indicate the recording.

: Green. Lit on connecting the networ

[Front Panel]

ode, it w

automatically changed to the

stant

ode. ‘Stop’ butto

ode, t w be auto at ca y c a ged to t e sta t ay ode. Stop butto

4) DISPLAY : It will change the screen splitting sequentially from 1 to 20

can be

9) PANIC : This button is used in emergency status. If you push this button

If you hold the shuttle, push the 10+ button while grabbing the shuttle

<HDR5008R, HDR-5016>

CH 1 Product Introduction

3. Function Keys

1. Playback Buttons

9. Backup Device

8. Number Buttons

4. Status Ramps

7. IR Window

5. Jog Shuttle2. Enter & Arrow Keys

6. USB

1. Playback buttons : It will be used on playback. If you press these buttons in live

ill be

Play m

changes from the play mode to the live mode.

2. ARROW, ENTER : This button is used to change settings for the product in

MENU Mode or used in Search Mode.

3. Function keys

1) MENU : It will move to the setup screen from the live mode.

2) SEARCH : It will change to the playback mode from the live mode.

3) BACKUP : It will move to the backup screen from the live or play mode. . It

adapted both live and play mode.

5) SWITCHING : It will change to switching mode except 20 splitting.

6) ZOOM : It will go to the digital zoom directly.

7) PTZ : It will change to the pan, tilt and zoom control mode from the live mode.

8) LOCK/EXIT : If you want move to the upper menu or exit without saving, press

this button. On playback, it will disappear the search list for the better viewing. On live viewing, it performs the system lock.

the DVR starts to record with maximum speed regardless of setting value.

4. Status lamps

POWER : Blue color back light. Power indicator. RECORD : Red. Indicate the recording. NETWORK : Green. Lit on connecting the network ALARM : Red. It will be lit on when the events happen

5. Jog Shuttle : You can use this wheel for fast retrieving and playback back and pro.

6. USB ports : These USB ports are for mouse and USB devices.

7. IR Window : the window for remote controller

CH 1 Product Introduction

button is used for Hold while Jog Shuttle action.

<HDR

5004>

() y ( )

( Warning Lamp and others)

8. Number buttons : If you press this button, it will be changed to full screen in live

viewing or playback If you want to go to 20ch, push the 10+ button twice. Also 10+

‘

’

(※ In menu and password setting, it is automatically converted to number buttons)

9. Backup device : You can use the versatile backup devices such as CD-RW and

DVD-RW.

[Rear Panel]

9.SENSOR IN

11.AUDIO OUT

3. LAN

4.SPOT

6. POWER

8.RELAY

7.RS485

13.Xbox

Extender

(option)

1.FAN

2.VIDEO IN

10. AUDIO IN

12.HDMI

5. VGA

1. Cooling Fan

2. Video In: This receives ima

es from SDI cameras(04) or any camera(04+).

3. LAN Port: This is the Gigabit Ethernet LAN cable connection terminal.

4. SPOT Out : To CRT 4:3 monitor for spot video.

5. VGA port: video output for analog RGB display

6. DC Power : DC12V 4.16A or up

7. RS485 port : For control the pan and tile cameras. Make sure that the polarity.

8. Relay out : This terminal blocks connect external electric devices to the product

9. Sensor In : This terminals can be connected to external sensors.

10. Audio In: RCA audio in terminals. You can record four channels at the same

time.

11. Audio Out: RCA audio out terminal.

12. HDMI : HDMI output for HD monitor

13. VGA Extender (option) : Connect EXTEND FTP cable to Receiver

※

For more details, refer to [CH 2. Installation Method and Cautions].

[Rear Panel]

※

For more details, refer to [CH 2. Installation Method and Cautions]

<HDR-5008>

CH 1 Product Introduction

9.SENSOR IN

11.AUDIO OUT

3. LAN

4.SPOT

6. POWER

8.RELAY

7.RS485

13.Xbox

Extender

(option)

1.FAN

2.VIDEO IN

10. AUDIO IN

12.HDMI

5. VGA

1. Cooling Fan

2. Video In: This receives images from analog/960H/SDI cameras.

3. LAN Port: This is the Gigabit Ethernet LAN cable connection terminal.

4. SPOT Out : To CRT 4:3 monitor for spot video.

5. VGA port: video output for analog RGB display

6. DC Power : DC12V 4.16A or up

7. RS485 port : For control the pan and tile cameras. Make sure that the polarity.

8. Relay out : This terminal blocks connect external electric devices to the product

( Warning Lamp and others).

9. Sensor In : This terminals can be connected to external sensors.

10. Audio In: RCA audio in terminals. You can record four channels at the same

time.

11. Audio Out: RCA audio out terminal.

12. HDMI : HDMI output for HD monitor

13. VGA Extender (option) : Connect EXTEND FTP cable to Receiver

[Rear Panel]

<HDR

5008R>

5. RS232C

: This is Serial communication(RS232C) cable connection terminal

11. VGA port

: video output for VGA display

CH 1 Product Introduction

12. Sensor, Alarm, RS485

9. Audio In

1.Video In

2.Audio Out

13. Extend

5. RS232C

6. e-SATA

10.HD Out

11. VGA

14.Spot Out

7. LAN

8. USB

1. Video In : This receives images from cameras and sends them to monitors. Loop Out : This sends the images from the cameras to the other devices.

2. Audio Out : RCA audio out terminal.

3. Power Switch

4. Adapter : Connect DC12V only.

6. e-SATA

7. LAN Port: This is LAN cable connection terminal.

8. USB ports : This USB port is for mouse and USB devices.

9. Audio In: RCA audio in terminals. You can record 16 channels at the same

time.

10. HD Out : Real HD(1920X1080) output for high resolution monitor

3. Switch

4.Adapter

12. Sensor, Alarm, RS485 : For external sensor and external electric devices to

these terminal block. There are 16 inputs, 2 relay output and 14 TTL output. For control the pan and tile cameras. Make sure that the polarity.

13. VGA Extend (option) : Connect EXTEND FTP cable to Receiver

14. Spot Out : For spot CRT monitor, composite signal comes out.

※

For more details, refer to [CH 2. Installation Method and Cautions].

[Rear Panel]

<HDR

5016>

5. RS232C

: This is Serial communication(RS232C) cable connection terminal

11. VGA port

: video output for VGA display

CH 1 Product Introduction

14.Spot Out

7. LAN

8. USB

9. Audio In

12. Sensor, Alarm, RS485

1.Video In

2.Audio Out

13. Extend

5. RS232C

6. e-SATA

10.HD Out

11. VGA

1. Video In : This receives images from cameras and sends them to monitors. Loop Out : This sends the images from the cameras to the other devices.

2. Audio Out : RCA audio out terminal.

3. Power Switch

4. Adapter : Connect DC12V only.

6. e-SATA

7. LAN Port: This is LAN cable connection terminal.

8. USB ports : This USB port is for mouse and USB devices.

9. Audio In: RCA audio in terminals. You can record 16 channels at the same

time.

10. HD Out : Real HD(1920X1080) output for high resolution monitor

3. Switch

4.Adapter

12. Sensor, Alarm, RS485 : For external sensor and external electric devices to

these terminal block. There are 16 inputs, 2 relay output and 14 TTL output. For control the pan and tile cameras. Make sure that the polarity.

13. VGA Extend (option) : Connect EXTEND FTP cable to Receiver

14. Spot Out : For spot CRT monitor, composite signal comes out.

※

For more details, refer to [CH 2. Installation Method and Cautions].

CH 2 Installation Method and Cautions

shock.)

CH2. Installation Method and Cautions

2-1. Cautions

WARNING

Risk of electric shock.

Do not open the cover of the product.

Servicing of this product by unauthorized personnel is

prohibited and will result in a void of warranty.

In order to ensure the most stable

conditions for power, the use of a UPS (Uninterrupted

Power Supply) is recommended.

- Avoid installing the product where there are direct rays or it is hot by locating near

from heat generator. (May cause fire)

- Do not put vase, flowerpot, cup, cosmetics, drug, and anything the contain water on

product. (May cause fire or electric shock, and it may injure people by falling)

- Do not insert or drop any metal object (coin, hair pin) or flammable object (match,

paper) into air hole. (May cause fire or electric shock)

- Do not put any heavy object on it. (May injure people by being fell or destroyed.)

- Put power plug surely not to be moved. (If not, this may cause fire.)

- Unplug power plug and antenna when there are thunders and lightening. (May

cause fire.)

- For cleaning the product, wipe surface with dry towel. Using chemical agent or

cleaner may change the color and unpeel paint. Do not put several plugs at same time. (May cause electric shock.) If there is smoke or strange smell, stop operation. In this case, turn the power off and unplug it, and then contact our service center. (If you keep using it, this may cause fire or electric shock.)

- Do not unplug by pulling cord. (If cord is damaged, it may cause fire or electric

- Do not plug or unplug with wet hands. (May cause electric shock.)

CH 2 Installation Method and Cautions

Do not touch power adaptor or signal controller. (May cause electric shock.)

- Keep the power cord untwisted. (May cause fire or electric shock.)

- Use proper adapter. (Using too much electric power may cause fire or electric shock.)

- Do not install it at where exposed to rain and wind and water drop. (May cause fire,

electric shock and transformation.)

- Keep away from fire. (May cause fire.)

-Do not disassemble or remodel on your own. (May cause malfunction or electric

shock.)

- Do not put next to flammable materials like flammable spray. (May cause fire.)

- Do not install it at a place with too much dirt. (May cause fire.)

- Do not install it on unstable places like shaking table and inclined place or shaking

place. (May injure users by falling down or being upside down.)

- Do not put an heavy object on power cord or avoid it from being pressed by the

device. (May cause fire or electric shock.)

- In case of using extension cord, do not use several devices at same time. (May cause

fire with abnormal heating of extension.)

- When there are dirt on power plug pin or power outlet, clean it nicely. (May cause

fire.)

-Do not damage on power cord or plug, and bend or twist or pull too much, and put it

between other objects or heat. If power outlet insertion part is not tight, do not use it. (May cause fire or electric shock.)

-Do not drop or give a shock to the product. (May injure people or cause malfunction.)

- Do not put any object too close to block cooling fan. (May cause fire.)

- In case of exchanging batteries with improper type, there might be danger of

explosion.

- For used batteries, throw away separately from other garbage.

- When you take out batteries, avoid children from eating them by mistake. Keep them

away from children. (If a child ate them, contact a doctor right away.)

CH 2 Installation Method and Cautions

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

FCC Warning :

yq q

Note :

This equipment has been tested and found to comply with the limits for a Class A provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

This device complies with the part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations.

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

CE Warning : This is a Class A product. In a domestic environment this may cause radio interference in which case the user ma

be required to take adequate measures.

This product has obtained EMI registration.

2-2 Product Installation

Thi

dditi

1) How to Connect External Video/Audio Device

CH 2 Installation Method and Cautions

s product may be composed of camera and monitor in default, and a

onally

the sensor, microphone, speaker and PC for network can be connected if necessary.

2-2-1. Power Connection

1) Connect adapter cable to power connection terminal at rear side.

2) Input AC power to the adapter. (free voltage from 100V to 240V, 50/60Hz)

※ You must operate it at the rated voltage instructed on the user's manual. In case power higher than the rated voltage is supplied, it may cause damages on product.

2-2-2. Connecting External Device

※ Connect it when power of the product is off. ※ Read through user's manual for the device you are connecting carefully.

MIC

CAMERA

Connect cameras to VIDEO IN by channels. Connect microphone (AMP) to AUDIO IN by channels. Connect VIDEO OUT to VIDEO IN of monitor. Connect HD output to HD Monitor. Connect AUDIO OUT to AUDIO IN of monitor (or speaker). Connect Spot output to Composite Monitor.

CH 2 Installation Method and Cautions

terminal is relay output with 1A, 24V or 0.5A,125V

2) How to connect external sensor

Sensor terminal is composed of 1 input channel and 1 output channel. Sensor out

SENSOR

SIREN

POWER

Sensor In : Connect the sensors. The sensor are composed of both signal and ground

terminals, with a voltage difference of 5V. In the case that the sensor used for input is of the N/O (Normal Open) type, when the voltage difference between the signal and ground falls to 0V (short), the DVR can use this as a trigger to start alarm/sensor

ased recording.

Sensor Out : Connecting external electrical devices

The relay output terminal does not provide power, and functions only on an ON/OFF basis via a relay. Normally, the signal and ground should be on an OPEN basis, and the DVR will complete the relay connection.

3) Connecting with PC using LAN cable

If you want to connect DVR to PC directly, use LAN cable, and if you want to use HUB, connect cable via hub.

*Hub : This is a device connecting one office to devices located near with using

cable when you organize LAN

*Cable : This is standard UTP cable used for communication among

devices through Hub and others when you organize LAN

HUB

CH 2 Installation Method and Cautions

In case of

installing the hard disk drive, open the upper case and install the hard disk

4) Connection Using PTZ camera

In case of using pan and tilt cameras, connect PAN/TILT DRIVE to product as shown at following figure.

VIDEO CABLE

SPEED

DOME

RS485 CABLE

5) Installing Hard disk drive

drive on the hard bracket. Remember that the main power should be off to install the hard disk drive. If you have any trouble, please contact the technical support.

6) Installing KBD-2

In case of installing the System Keyboard with Joystick and Jog Shuttle KBD-2, connect KBD-2 to RS485 of DVR. The cable should be connect DOME2 of KBD-2. Be careful the polarity

VIDEO CABLE

SPEED

DOME

RS485 CABLE

CH 3 How to Use

ill b

CH3. How to Use

3-1. General Usage Information

The ULTIMA series DVR can be operated with a mouse or remote controller under the four main modes listed below:

Live Mode – This is the “main or default” mode. From this mode you can view in

real time all currently operating cameras, information regarding camera status, and have access to Pan/Tilt camera controls. In addition, system status information will

e shown during live mode, and other modes can be entered from Live mode.

Setup Mode – The user will be able to customize settings for Live viewing,

Recording, Backup, and Camera related devices under the Setup Mode.

Search Mode – In Search Mode, the user will be able to review all recorded footage

in the case that an event must be reviewed using a calendar or event based search.

Backup Mode –In Bac

the preferred supported media of their choice (ex. CD, DVD, USB Backup, Remote Client Software, etc.)

Password Protection – The DVR system will utilize a user ID and password system to prevent unauthorized usage of this product. Control of the system will only be possible after entering a proper ID and password as illustrated below. (Factory Default settings are blank for these fields).

IDs and passwords should be managed by a system administrator, as different users may be given different levels of access to the DVR.

up Mode, the user w

e able to archive the desired data to

3-2. LIVE Mode

ill k

CH 3 How to Use

n this section you w

now how to split the video mode into 1, 4, 6, 8, 9, 12, 16, as

well as auto sequencing, PTZ Control, Mouse control, Setup configurations, Backup

3-2-1. LIVE Mode Control

1) Live View Status

You may use the Live Menu Bar located at the bottom for quick shortcuts and view status of certain items.

Recording indicator

Event recording indicato

Motion detection indicator

Sensor activation indicator

POS indicator

2) Live Menu Bar

You may use the Live Menu Bar located at the bottom for quick shortcuts and view status of certain items.

+ 52 hidden pages

Eneo HDR-5004AH1.0 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual