Eneo HDB-2080MIR User Manual

INSTALLATION AND OPERATION MANUAL

for

HDB-2080MIR

1

Table of contents

1. Safety Instructions and Notes….......................................................................................................

2. General Descriptions............................................................................……………………………...

3

3

3. Supplied Items......................................................................................……………………………...

4. Part names…………………………….…...................................................…………………………...

5. Installation Instructions......................................................................................……………………...

6. Setup Menu ……………............................................................................…………………………...

7. Specifications ………………………………………………..................................................................

8. Dimensional Drawings ……………………………………………............................................................

5

6

7

10

22

23

2

Caution

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.

The symbol is intended to alert the user to the presence of

uninsulated "dangerous voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock
to persons.

To prevent electric shocks
and risk of fire hazards, do
NOT use other than specific
power source.

Warning(NTSC version) -- This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

Caution -- Any changes or modifications in construction of this device which are not expressly approved by

the party responsible for compliance could void the user's authority to operate the equipment.

Mains power quality should be that of a typical commercial environment. If the user of the model requires

continued operation during power mains interruptions, it is recommended that the model be powered from

an uninterruptible power supply (UPS) or a battery.”

Notice -- The images used in manual are processed to help comprehension and may
differ from actual video of the camera.

WARNING

NEVER USE THIS CAMERA

1. IN AREA WHERE HAS SHOCK OR VIBRATION WHICH RESULTS IN THE
PROBLEM.

3

1. Safety Instructions and Notes

• Please read this safety and operating instructions before putting the camera into
operation.

• Keep the manual in a safe place for later reference.

• Pay attention to safety when laying the connection cable and observe that the cable is not

subjected to heavy loads, kinks or damage and no moisture can get in.

• Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.

• Maintenance and repair have to be carried out only by authorized service centers.

• Use only a mild detergent to clean the housing.

• The camera should never be operated beyond the technical specifications. This can lead

to destruction.

• The camera should never be operated in the water.

2. General Descriptions

FULL HD WDR HD-SDI CAMERA, 1920 x 1080/30p(25p)
Highly detailed pictures can be achieved and color reproducibility deserves attention.

With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can accepts the infrared light

With Intelligent Focus Indicator and FOCUS ADJUST menu,

- Offers easy adjustment of Focus

- Eliminates the mistake of the erratic focus adjustment

With 24VAC/12VDC dual power design,

- Offers the flexibility of installation

- Ensures the reliability

Main features are;

• Full HD, 1920 x 1080/30p(25p)

• True Wide Dynamic Range

• DUAL Filter Switcher – No Focus Shift at Night.

• Day & Night Simulation

• Built-in Mega Pixel Vari-focal Lens (f=2.8~10mm)

• Non Compression digital streaming up to 1.485Gbps

• Intelligent Focus Status Indicator on Screen

• Pointing Zoom which enables the flexible zooming at any area.

4

• Smart Motion Zoom in combining with Pointing Zoom.

• Scale down the image to 720p without loss of field of view

• Top performance at low light sensitivity (Sense-up On)

• Improved Noise figure with the enhanced 3D-NR

• D-WDR, BLC/HLC, Digital Zoom(1.1x~8x)

• Motion Detect, Privacy Mask, Anti-Fog, Sense-up(x8)

• LSC(Lens Shade Compensation)

• RS-485(Pelco-D)

• OSD MENU & CVBS Video Sub-out port for easy installation & Maintenance

• Circuit protection against faulty connection.

• Isolated power supply against ground loop problem.

• Dual Window

• External Zoom & Focus Adjustment

• One touch locking bracket

• Easy installation pad

• IP 68 Protection

• 40 LEDs

5

①

②

③

④

⑤

3. Supplied Items

• 1x Weatherproof Bullet camera

• 1x Installation and Operating Instructions

• 1x Mounting template

• 1x ⓓ Sunshield panel with ⓐ Fixing screw for Sunshield panel

• 1x Easy Bracket

• 1x ①3mm Hex L-wrench

• 4x ②anchors

• 4x ③Wall fixing screws

• 4x ④Wrench Bolts

• 1x ⑤Video Sub-out cable

6

ⓕ Arm assembly

ⓙ

4. Part Names

4.1 Front view

ⓓ

ⓐ

ⓑ

ⓒ

ⓐ Fixing screw for Sunshield(x2)

ⓑ IR LED

ⓒ Window

ⓓ Bracket Foot

ⓔ Foot mount Hole(x4)

ⓔ

ⓕ

ⓖ

ⓗ

ⓘ

ⓖ Sunshield panel

ⓗ Bracket Lock

ⓘ OSD cover

4.2 Rear side view

ⓚ

ⓛ

ⓜ

ⓙ Focus adjustment

ⓚ Zoom adjustment

ⓛ Hook for Easy Bracket

ⓜ Cable Exits(x5)

7

4.3 Easy Bracket

CAUTION - Easy Bracket can not be

ⓞ

ⓝ

ⓝ Peg for Easy Bracket Hook(ⓛ)

ⓞ Wall Mount hole(x4)

ⓟ Bracket foot fixing hole(x4)

ⓟ

CAUTION - Easy Bracket can not be installed on the ceiling.

When it is installed on the wall, ⓝPeg for Easy bracket Hook must be placed upwardly.

5. Installation Instructions

• Make sure the power is removed before the installation.

• Follow the order for applying power.

First, connect the low voltage (AC24V or DC12V), then plug the AC adapter to AC outlets to avoid an
improper reset from power jitter and a damage from the surge voltage when no load.

5.1. Mounting the camera on wall

5.1.1 Without using an Easy Bracket.

1) Drill the holes on wall or ceiling using a supplied template.

2) Insert the ②anchors to the drilled holes

3) Match ⓔFoot mount Hole(x4) to the drilled position

4) Fix the bracket by using ③Wall fixing screws

5.1.2 With using an Easy Bracket.

1) Drill the holes on wall using a supplied template.

2) Insert the ②anchors to the drilled holes

3) Match the EASY BRACKET to the drilled position

4) Fix the EASY BRACKET by using ③Wall fixing screws

5) Connect hook(ⓛ) to peg(ⓝ)

6) Fix ⓓBracket Foot to EASY BRACKET by using

④wrench bolts through ⓔFoot mount Hole(x4)

installed on the ceiling.
When it is installed on the ceiling,

ⓝPeg for Easy bracket Hook must be
placed upwardly.