Endress+Hauser CYP02D Specifications

TI00481C/07/EN/17.18
71424912
2018-09-30

Products Solutions Services

Technical Information

Memocheck CYP02D /
Memocheck Sim CYP03D

Testing tools for analysis measuring points

Simulation of sensors with Memosens Technology

Application

• Chemicals and process engineering

• Food, pharmaceutical industry and biotechnology

• Water and wastewater treatment

• Hazardous areas

Your benefits

• Increased plant safety thanks to complete sensor and error simulation

• Easy, quick and reliable sensor simulation with user-definable measured values for
CYP03D and fixed values for CYP02D

• Error simulation

• Verification of all parameters: pH (glass and ISFET), ORP, conductivity (conductive
and toroidal), dissolved oxygen (amperometric and optical), chlorine, turbidity and
nitrate

• High degree of flexibility when commissioning the measuring point

• Utmost reliability owing to Memosens Technology:
– No contact corrosion
– Completely watertight
– No interference from external potential thanks to galvanic isolation of simulator

and transmitter

Function and system design

3

SIMU

1

2

3

OK

Memocheck CYP02D / Memocheck Sim CYP03D

Simulation setup in non­hazardous areas

Sensor simulation in a complete measuring system consists of:

• Memocheck CYP02D or Memocheck Sim CYP03D

• Transmitter with Memosens Technology, e. g. Liquiline M CM42 or Liquiline CM44x

• Memosens data cable CYK10

A0025995

 1 Measuring system with Memocheck Sim CYP03D

1 Transmitter Liquiline CM44x
2 Memosens data cable CYK10
3 Memocheck Sim CYP03D

 2 Measuring system with Memocheck CYP02D

1 Liquiline M CM42 transmitter
2 Memosens data cable CYK10
3 Memocheck CYP02D

A0025994

2 Endress+Hauser

Memocheck CYP02D / Memocheck Sim CYP03D

II 2G

II 1G

II 3G

Ex ia

Zone 1

Zone 0

Zone 2

CYK10

CYP03D

not permitted

only with ATEX­Approval

Simulation setup in hazardous areas

Sensor simulation in a complete measuring system consists of:

• Memocheck Sim CYP03D

• Transmitter with Memosens Technology and Ex approval, e. g. Liquiline M CM42

• Memosens data cable CYK10

A0026198-EN

 3 Operation in hazardous areas

Endress+Hauser 3

Performance characteristics

Memocheck CYP02D / Memocheck Sim CYP03D

Memocheck CYP02D simulation values

Memocheck CYP02D consists of two interconnected sensor plug-in heads which are independent of
one another, and which each supply one specific parameter. You can simulate the following values
depending on your order:

Simulation values output for pH glass and pH ISFET

Fixed simulation
value

pH glass 4 25 ˚C (77 ˚F)

pH ISFET 7 60 ˚C (140 ˚F)

Temperature

Simulation values output for pH glass and pH glass

Fixed simulation
value

pH glass 4 25 ˚C (77 ˚F)

pH glass 7 60 ˚C (140 ˚F)

Temperature

Simulation values output for pH glass and ORP

Fixed simulation
value

pH glass 4 25 ˚C (77 ˚F)

ORP potential 750 mV 90 ˚C (194 ˚F)

Temperature

Simulation values output for pH glass and oxygen

Fixed simulation
value

pH glass 4 25 ˚C (77 ˚F)

Oxygen 60 nA

1) Sensor current

1)

Temperature

60 ˚C (140 ˚F)

Simulation values output for pH glass and conductive measurement of conductivity

Fixed simulation
value

pH glass 4 25 ˚C (77 ˚F)

Conductivity 20 µS/cm 60 ˚C (140 ˚F)

Temperature

Simulation values output for pH glass and chlorine

Fixed simulation
value

pH glass 4 25 ˚C (77 ˚F)

Chlorine 60 nA

1) Sensor current

1)

Temperature

25 ˚C (77 ˚F)

The data listed above are displayed on the transmitters.

Memocheck CYP02D is maintenance-free.

4 Endress+Hauser

Memocheck CYP02D / Memocheck Sim CYP03D

Memocheck Sim CYP03D simulation values

With the Memocheck Sim CYP03D you can simulate the following data:

• Simulation values
– Main values
– Raw values
– Temperature

• Parameter
– pH glass (pH glass)
– pH glass, SIL sensor (pH glass SIL)
– pH ISFET (pH Isfet)
– ORP (ORP)
– pH + ORP combined sensor (pH + ORP)
– Conductivity conductive (Cond c)
– conductivity, conductive, 4-pin (Cond c 4-pol)
– conductivity, inductiveCond i)
– oxygen, amperometric (Oxygen (amp.))
– Oxygen, optical, Memosens (Oxygen (opt.Memo.))
– Oxygen, optical, fixed cable (Oxy. (opt.fixed))
– Chlorine (Chlorine)
– TurbidityTurbidity)
– Nitrate (Nitrate)
– SAC (SAC)

• The main simulation values can be selected as required within the context of the sensor
specification values

• Repeated ramp with any increment

• Error, e. g. glass breakage, alarm and warning

• Calibration values

You can freely configure all the values so that they match your process. The data listed above are
displayed on the transmitters.

The Memocheck Sim CYP03D can, with the quality or calibration certificate, also be used as a
qualification tool for your measuring point.

The quality and calibration certificates can be renewed:
For such services, you will need to return Memocheck Sim CYP03D to Endress+Hauser.
In the case of requalification, the device is tested fully and a new quality certificate is issued.
In the case of recalibration, in addition to requalification the device is also incorporated into a
calibration procedure. A quality certificate and a certificate of calibration are issued. The
recommended testing interval is 1 year.

Environment

Ambient temperature range Memocheck CYP02D

–15 to 70 °C (5 to 158 °F)

Memocheck Sim CYP03D

–20 to 50 °C (–4 to 120 °F)

Storage temperature Memocheck CYP02D

–15 to 70 °C (5 to 158 °F)

Memocheck Sim CYP03D

-20 to 55 °C (-4 to 130 °F)

Degree of protection Memocheck CYP02D

IP65

Memocheck Sim CYP03D

IP55

Endress+Hauser 5

Memocheck CYP02D / Memocheck Sim CYP03D

89 (3.5)

25.8 (1.02)

25.8 (1.02)

37.4 (1.47)

Ø 20 (0.79)

40.0 (1.57)

25.0 (0.98)

58.0 (2.28)

94.0 (3.7)

36.0 (1.42)

200.0 (7.87)

Electromagnetic compatibility

Dimensions

Interference emission and interference immunity as per EN 61326-1:2013, Class A for Industry

Mechanical construction

A0026004

 4 Memocheck CYP02D

 5 Memocheck Sim CYP03D
All dimensions in mm (in)

6 Endress+Hauser

A0026005

Memocheck CYP02D / Memocheck Sim CYP03D

Weight (CYP03D only, incl. batteries)

Materials

Batteries

 mark

0.3 kg (0.7 lbs)

Memocheck CYP02D:

White plastic: PET
Blue plastic: PPS GF 40

Memocheck Sim CYP03D:

Housing: ABS (UL 94 HB)

No batteries are required for the Memocheck CYP02D.

For the Memocheck Sim CYP03D, use only the following battery types, as only these are covered by
the Ex approval:

• Energizer, EN91 (AA, 1.5 V, LR6 as per IEC), x 3

• Battery storage temperature: -20 to 35 ˚C (-4 to 95 ˚F)

Certificates and approvals

The product meets the requirements of the harmonized European standards. As such, it complies
with the legal specifications of the EU directives. The manufacturer confirms successful testing of the
product by affixing to it the  mark.

Ex approvals

Memocheck Plus CYP02D

• ATEX/IECEx II 2G Ex ia IIC T6 Gb

• FM/CSA IS NI Cl.I Div.1&2, Group A-D

Memocheck Sim CYP03D

• ATEX II 2G Ex ia IIC T4 Gb

• IECEx Ex ia IIC T4 Gb

• CSA IS NI Cl. I, Div. 1&2, Group A-D

Endress+Hauser 7

Ordering information

Memocheck CYP02D / Memocheck Sim CYP03D

Product page

Product Configurator

Scope of delivery

www.endress.com/cyp02d

www.endress.com/cyp03d

On the product page there is a Configure button to the right of the product image.

1. Click this button.
 The Configurator opens in a separate window.

2. Select all the options to configure the device in line with your requirements.
 In this way, you receive a valid and complete order code for the device.

3. Export the order code as a PDF or Excel file. To do so, click the appropriate button on the right
above the selection window.

For many products you also have the option of downloading CAD or 2D drawings of the
selected product version. Click the CAD tab for this and select the desired file type using
picklists.

Memocheck Plus CYP02D

• 1 Memocheck CYP02D with 2 plug-in heads

• 1 Operating Instructions (de + en)

Memocheck Sim CYP03D

• Memocheck Sim CYP03D

• Operating Instructions

• 1 quality certificate as ordered

• Cable as per order (optional)

• Case to store CYP03D and cable (optional)

• Certificate of calibration (optional)

8 Endress+Hauser

Memocheck CYP02D / Memocheck Sim CYP03D

Accessories

The following are the most important accessories available at the time this documentation was
issued.

For accessories not listed here, please contact your Service or Sales Center.

‣

Memosens data cable

Storage case

Order No. Memosens data cable CYK10 (optional)

71128718 CYK10-A032 + adapter, cable ends; Non-Ex

71128721 CYK10-G032 + adapter; only for CYP03D, Ex

For the Memocheck CYP02D, you can use the Memosens data cable CYK10 belonging to the
measuring point.

To connect the Memocheck Sim CYP03D to transmitters with M12 sockets and Pg couplings, you
require the Memosens data cable CYK10 provided. The cable is always supplied with an adapter
piece so that it fits both M12 sockets and Pg couplings. If you wish to simulate fixed cable sensors
(turbidity, nitrate, toroidal conductivity, oxygen optical) with the Memocheck Sim CYP03D, you need
this cable. When using sensors with an inductive Memosens plug-in head (pH/ORP, oxygen,
conductive conductivity, chlorine), the appropriate cable is already included in the measuring point.

Order No.

71183327 Ex

In the hazardous area, the Memocheck simulator case should only be opened to remove or put back
the Memocheck simulator. When opened, the case should never be exposed to process-related
intensive electrostatic charges.

Case for Memocheck Sim CYP03D

Endress+Hauser 9

www.addresses.endress.com