Emerson Research ES299 Owner's Manual
OWNER'S MANUAL
E S299
Visit our web site at www.emersonradio.com
Multi-Media Audio System
with Digital Tuner,
CD-R/RW MP3 Player,
SD/MMC Flash Memory Card
Reader and USB Port
ES299_062905.p65 29/6/2005, 15:0748
1
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions.
2.) Keep these instructions.
3.) Heed all warnings.
4.) Follow all instructions.
5.) Do not use this apparatus near water.
6.) Clean only with dry cloth.
7.) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8.) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11.) Only use attachments / accessories specified by the manufacturer.
12.) Unplug this apparatus during lightning storms or when unused for long periods of time.
13.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
14.) This appliance shall not be exposed to dripping or splashing water and no object filled with
liquids such as vases shall be placed on the apparatus.
15.) Do not overload wall outlet. Use only power source as indicated.
16.) Use replacement parts as specified by the manufacturer.
17.) The product may be mounted to a wall only if recommended by the manufacturer.
18.) Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.
!
CAUTION
RISK OF ELECTRI C SHOCK
DO NOT OPE N
The li ghtning flash with arrowhead symbol, within an equilateral triangle is intended to
al ert the user to the presence
of uninsulated ‘dangerous voltage’
within the product’s enclosure
that may be of sufficient
magnitude to constitute a ri sk
of electric shock to persons.
The exclamation point wi thin
an equilateral triangl e is intended to alert the user to
the presence of important
operati ng and maintenance
(servicing) instructions in
the literature accompanying the appliance.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BAC K), NO USER
SERVICEABL E PARTS INSIDE
REFER S E R V I C I N G TO
Q U A L I F I E D S E R V I C E
PERSONNEL.
CAUTION
ES299_062905.p65 29/6/2005, 15:071
2
Thank You………………
for purchasing the Emerson Research Multi-Media Audio System. This is the world’s
first compact audio system to include a card slot for SD/MMC flash memory cards.
This allows you to play the MP3 music files which you have stored on SD or MMC
flash memory cards. Simply remove the card from your solid state MP3 player and
insert it into the convenient front panel card reader slot. Now you can enjoy your
MP3 files through the speakers of this system instead of using headphones, which
means you can share the music with all your friends.
We’ve also included a convenient USB port on the front panel as well. This allows
you to connect and play MP3 music files stored on portable USB storage devices.
Of course the built in CD player also plays CD-R, CD-RW, and MP3 encoded CDs
in addition to normal pre-recorded CDs. And the digital tuner will store up to 40 of
your favorite stations (30 FM / 10 AM) for easy and immediate recall.
Finally, all functions of this system can be operated from the comfort of your favorite
chair with the ultra-slim 22-key remote control.
Please be sure to read this manual carefully and completely to make sure you
understand all of the exciting features and functions included in your new system.
We have taken great care to make sure that this system was in perfect working
order when it left our factory. If you experience any problem with the set-up or
operation of this system please do not return it to the dealer. Please call the Emerson
Customer Service Hotline. toll-free, at 800-898-9020. One of our representatives
will try to diagnose and correct the problem for you. If that is not possible you will
be advised how to obtain a replacement.
Once again, all of us at Emerson Research thank you for your purchase.
ES299_062905.p65 29/6/2005, 15:072
3
• Operate control s and switches as
described in the manual.
• Before turning ‘On’ the power, make
certain that power cord is properly
installed.
• Stor e your CDs, Memory Cards in a cool
area to avoid damage from heat.
• When moving the set, be sure to first
disconnect the power cord.
•A void installing this unit in places
exposed to di rect sunlight or close to
heat radiating appli ances such as
electric heaters, on top of other stereo
equipment that radiates too much heat,
places lacking ventilation or dusty areas,
places subject to constant vibration and/
or humid or moist areas.
•Do not attempt to cl ean this unit with
chemical solvents as this might damage
the finish. Use a clean dry cloth.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This p roduct contains a low power Laser Device.
FCC Informatio n
This equipment has been tested and found to comply with the limits for a Class B digital
devi ce, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasona ble protection against harmful interference in a residential installation. This
equipment genera tes, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communicat ions. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
IMPORTANT NOTES
ES299_062905.p65 29/6/2005, 15:073
4
PREPARATION FOR USE
Unpacking and Set Up
• This carton contains the main unit, two speakers with removable front panels,
and the remote control handset.
Carefully remove all the components from the carton and remove all packing
materials form the components. Make sure nothing is accidentally discarded
with the packing materials.
• Save the carton and packing materials, if possible, in the unlikely event that
this unit ever needs to be returned for service. Using the original carton and
packing material is the only way to properly protect the unit from shipping
damage.
• Remove any descriptive stickers or labels from the front panel of the main unit.
Do not remove any labels or stickers that may be affixed to the back panel of
the main unit or the speakers.
• Unwind the AC power cord on the back of the main unit and extend it to its full
length.
• Unwind the FM lead wire antenna on the back of the main unit and extend it to
its full length.
• Unwind the speaker cables on the backs of the speakers and extend them to
their full length.
ES299_062905.p65 29/6/2005, 15:074
5
Connecting The Speakers
Note: Always connect the speakers before switching the power ‘On’, and
never operate the system without the speakers properly connected.
The speaker cables and the speaker terminals are color-coded.
Connect the Red wires to the Red terminals.
Connect the Black wires to the Black terminals.
If the wires are connected incorrectly the sound will be “muddy” or distorted.
To make the connection, completely depress the plastic levers to open the terminals,
insert the bare end of the speaker wire into the terminal openings, and release the
plastic levers to lock the wires in place.
+
R
L
+
RED
BLACK
ES299_062905.p65 29/6/2005, 15:075
6
LINE OUT (R/L) Jacks
This system includes a pair of LINE OUT (R/L) jacks for the connection to optional
external amplifier.
To External Amplifier
LINE-IN Jacks
ES299_062905.p65 29/6/2005, 15:076
7
Auxiliary Input Jacks
This system includes AUX IN R/L Jacks. These jacks allow you to connect external
audio equipment to this system and listen to the sound from the external equipment
through the speakers of this system.
Examples of the types of external equipment that may be connected are:
A cassette deck; the audio outputs from a VCR or DVD player; a personal cassette
player, MP3 player, MD player, or a personal hard-disc audio jukebox device such
as an iPod®.
Connect the audio output jack(s) or headphone jack of the external audio equipment
to the AUX IN R/L jacks on the back panel of this system.
CONNECTION CABLES ARE NOT INCLUDED.
You may leave your external device permanently connected to this system if you
wish. It is not necessary to disconnect the external device in order to listen to the
Tuner or CD player in this system.
Instructions for listening to your external device will be found at the end of this
Owner’s Manual.
From External
Audio Source
ES299_062905.p65 29/6/2005, 15:077
8
Power Source
This system is designed to operate on 120V AC 60Hz house current only.
Connecting this system to any other power source may cause damage to the
system and such damage is not covered by your warranty.
Not e: The system has polarized AC plug with one wide blade and one narrow
blade. The plug will onl y fit into matching polarized AC outlets.
This is a safety feature to reduce the possibility of electric shock. If th e plug will not
fit in your AC outlets, you probably have an outdated non-polar ized outlet. You
should have your outdated outlet changed by a qualified, licensed electricia n. Do
not file the wide blade on the plug, or use an adapter to make the plug fit into your
outlet. This defeats the safety feature and could expose you to electric shock.
AC Plug
AC Outlet
Placement Of The System
The system should be placed on a stable, level surface such as a table, shelf, or
stand, convenient to a 120V 60Hz AC outlet, out of direct sunlight, and away from
sources of excess heat, dust, moisture, or vibration.
The speakers may be separated from the main as far the wires allow for maximum
stereo separation, or the may be placed to the immediate left and right of the main
unit.
ES299_062905.p65 29/6/2005, 15:078
9
Protect Your Furniture
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. T hese 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certa in types of oil based furniture polishes, wood preservatives,
or c leaning sprays may cause the rubber 'feet' to soften, and leave marks or a
rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend th at you purchase small self-adhesive felt pads, available at hardware
stores and home improvement centers everywhere, and a pply these pads to the
bottom of the rubber 'feet' before you place the product on fine wooden furniture.
Stereo Headphone Jack
This system includes a stereo PHONES jack on the front panel of the main unit.
You may connect a set of stereo headphones, not included, to this jack for private
listening without disturbing others.
The main speakers are automatically shut off when headphones are connected to
the PHONES jack. Make sure that the plug from your headphones is fully inserted
into the headphone jack. If the plug is not fully inserted the sound may be intermittent,
or you may only hear sound from one side of the headphones.
IMPORTANT: To prevent hearing damage always set the volume control to a
low level before you connect the headphones. Then connect the headphones,
put them on, and very gradually increase the volume to a comfortable listening
level. Remember that CDs may contain both very soft and very loud passages.
Adjust the volume to a comfortable level using a louder passage, so that you
always know what the maximum level will be.
ES299_062905.p65 29/6/2005, 15:079
10
LOCATION OF CONTROLS AND INDICATORS
Front Panel
22
20
19
1
2
3
4
5
6
18
17
16
15
14
13
12
11
10
8
7
21
9
ES299_062905.p65 29/6/2005, 15:0710
11
Back Panel
26
25
24
23
27
ES299_062905.p65 29/6/2005, 15:0711
12
Front Panel
1.)PHONES Jack.
2.)CD Tray.
3.)ALBUM/MEMORY CH. – Button.
4.)ALBUM/MEMORY CH. + Button.
5.)FUNCTION Button.
6.)TUNER/BAND Button.
7.)SD/MMC FLASH MEMORY Card Slot.
8.)Remote Sensor.
9.)EQ Button.
10.) STANDBY LED Indicator.
11.) STANDBY ON/Off Button.
12.) CD Tray OPEN / CLOSE Button.
13.) Multi Function Display.
14.) DBBS Button.
15.) VOLUME + Button.
16.) VOLUME – Button.
17.) USB Port.
18.) SD/MMC Memory Card /USB LED Indicator.
19.) PLAY/PAUSE Button.
20.) STOP Button.
21.) SKIP/TUNING + Button.
22.) SKIP/TUNING – Button.
Back Panel
23.) AUX IN R/L Jacks.
24.) FM Lead Wire ANTENNA.
25.) LINE OUT R/L Jacks.
26.) SPEAKER Terminals.
27.) AC Power Cord.
ES299_062905.p65 29/6/2005, 15:0712
13
Remote Control
1.) DBBS Button.
2.) EQ Button.
3.) ALBUM/MEM CH. – Button.
4.) MODE Button.
5.) ALBUM/MEM CH. + Button.
6.) INTRO Button.
7.) REPEAT Button.
8.) STOP Button.
9.) FUNCTION Button.
10.) AUX Button.
11.) TIMER Button.
12.) IR (Infrared) Transmitter.
13.) STANDBY ON/Off Button.
14.) SLEEP Button.
15.) PLAY/PAUSE Button.
16.) SKIP/TUNING + Button.
17.) SKIP/TUNING – Button.
18.) RANDOM Button.
19.) PROGRAM/CLOCK Button.
20.) TUNER/BAND Button.
21.) MUTE Button.
22.) VOLUME + Button.
23.) VOLUME – Button.
24.) Battery Compartment.
24
1
2
3
4
5
6
8
9
10
11
14
15
16
18
20
21
22
23
12
19
13
7
17
INTRO
SKIP/TUNING
MODE
TUNER/BAND
DBBS
MUTE
AUX
RANDOM
REPEAT
STANDBY/ON
TIMER
SLEEP
FUNCTION STOP
PLAY/PAUSE
EQ
ES299_062905.p65 29/6/2005, 15:0713
14
Remote Control Battery
The remote control requires one “button-type” 3-volt Lithium
battery, included. To extend the life of the or iginal battery
we have inserted a small clear plastic spacer tab between
the Lithium battery and the battery terminal.
You must remove this battery spacer tab before you can
use the remote control.
To remove the tab, pull it in the direction of the arrow in the
illustration as shown.
When the oper ation of the remote control becomes
intermittent or unsatisfactory, repl ace the original battery with
a new 3-volt Lithium battery.
The battery number is CR2025 or equivalent.
1.)To replace the battery, slide the battery holder out of the
remote control in the direction of “arrow”.
2.)Remove the original battery from the holder and in stall a
new CR2025 battery with the “+” side facing up as shown
in the illustration. Then slide the battery holder back into
the remote control.
Dispose of the original battery properly. It should not be thrown into a
fire as the battery may exp lode if incinerated. It should not be left around
where small children or pets migh t play with, or swallow it. If the battery
is accidentally swallow ed, contact a physician immediately.
Remove
before use
Remueva
antes de
usar
INTRO
SKIP/TUNING
MODE TUNER/BAND
DBBS
MUTE
AUX
RANDOM
REPEAT
STANDBY/ON
TIMER
SLEEP
FUNCTION STOP
PLAY/PAUSE
EQ
INTRO
SKIP/TUNING
MODE
TUNER/BAND
DBBS
MUTE
AUX
RANDOM
REPEAT
STANDBY/ON
TIMER
SLEEP
FUNCTION STOP
PLAY/PAUSE
EQ
CR2025
1
2
3V
ES299_062905.p65 29/6/2005, 15:0714
Loading...