R66C and R66E Series
Unprotected and Protected
Outside Plant for
Business-Critical Continuity™
Key Features
nCommon clip configuration allows for termination of up to three extensions for each network cable pair
nCompact size requires minimum mounting space
nNotched fanning strips for ease of wire tracing, identification, and good housekeeping
nChoice of protected or non-protected
configuration for flexible deployment applications
nOptional rugged aluminum housings for indoor use provide long life; low maintenance costs
nUL Listed to meet or exceed documented performance levels
Designed to provide excellent transient protection on residential and commercial telecommunication lines.
Description
R66 series quick-clip blocks are designed to easily terminate solid insulated copper wire for distribution to multiple extensions. Terminate unstripped solid 20to 26-gauge (.4 to .8 mm) conductors using an industry standard 714-type punch-down tool (Emerson R714B). Integral fanning strips are molded on each side of the base, notched every five rows to simplify pair identification.
R66CB16 R66EB112
R66C 6-pair blocks are configured as 4 x 12, with all four clips in each row being common. Network cable
is terminated on column A. Up to three pairs can be terminated on columns B through D for distribution. Row connections follow the tip/ring alternating sequence. Available in protected or unprotected configuration.
The R66C312VSR incorporates two 6-pair protected blocks housed in a rugged aluminum housing for added security. These blocks are protected with gas arresters.
The R66EB112 is configured as 2 x 24 clips. For 6-pair applications, the network cable is terminated on column A and customer premise cable is terminated on column D. Close the circuit by installing bridging clips over or jumper wires between columns B and C.
Application
R66C series blocks are used in equipment rooms or satellite closets with common communications component features. The R66C1 and R66C3 series provide station termination and protection in 6-pair increments. These blocks fill the need for an R66 block smaller than 25-pairs.
Non-connectorized R66E series blocks can be used in equipment rooms or satellites as a straight 12-pair in/out block or 6-pair block for cross-connect applications.
R66C16 VSR/JZ |
R66C312VSR |
OSPDS-072500 / 0512 |
1 |
Loading...