Emerson MWX 100, ST 30, Ultraseal 20, Ultrasplice 40, Ultraweld L20 Specification Sheet

ATP-2040e

Touch Screen Controller

Metal Welding

The Branson Touch Screen
Controller

Imagine if you could control sophisticated yet user-friendly
your production and profits at interface decreases setup time
the touch of a button. The while increasing your control
Branson Touch Screen Controller over weld parameters. The
allows you to do just that with result is reduced pressure on
many of our ultrasonic welding you and an impressively efficient
products. Designed with the production process that your
power and functionality of competitors will find hard to
upgradable computer software, touch.
the Touch Screen Controller’s

Metal Welding

ATP-2040e

Touch Screen Controller

Control Features:

• Sequential Welding Capability.

• RS232 Port.

• Printer Interface.

• Automatic weld parameter

calculations based on the
cross-sectional area of the
splice (wire splicing).

• Weld Quality: Weld

amplitude is automatically
maintained with line
voltage variations of ±10%
through Branson’s
proprietary closed loop
control.

• Weld Modes: 4 different

weld modes to suit your
particular application.

– Energy
– Time
– Height (compaction)
– Energy with Height

Compensation

– Amplitude Stepping

Quality Controls:

•

Text and Audible alarm messages.

• Two Level Password Protection.

• Lock on Alarm: Ensures

suspect part is clamped
until a password is entered.

• Q System Protection Monitor

(SPM) Three levels of power
protection are provided:

1) phasing

2) over voltage

3) over current

• Circuitry system helps avoid

equipment failures and
provides greater weld
accuracy and repeatability.

Operator Interface:

• Selectable Languages.

• Bar Code scanner capable:

Presets and Sequences can
be recalled through the use of
the Bar Code Scanner.

• Preset: All weld parameters are

saved so manual adjustment of
controls is not required.

• Teach Mode: The teach mode

automatically calculates your
weld quality windows for:

– Time
– Power
– Pre Height
– Height

Branson Ultrasonics Corporation
41 Eagle Road, Danbury, CT 06813-1961
[phone] • Fax: [phone]
www.bransonultrasonics.com

e-mail: [e-mail]

Touch Screen Controller © Branson Ultrasonics Corporation 2011

The Emerson logo is a trademark and service mark of Emerson

Electric Co.
Revised and printed in the U.S.A. 9/2011