Emerson MS9904TTC User Manual

Home Audio System
with 3 CD Changer,
Belt-Drive Turntable,
Dual Cassette deck
and Remote Control
OWNER'S MANUAL
MS9904TTC
Visit our web site at www.emersonelectronics.ca
MS9903TT_ib080503.p65 5/8/2003, 11:4430
C A U TI O N
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAU TI ON
RI SK OF ELE CTRIC S HOC K
DO NOT OP EN
The lightning fla sh with arr ow­head symbol, withi n an equi­la ter al tri ang le i s inte nde d to alert the user t o the presence of uninsulated dangerous voltage wit hin the product s enclos ure th at may be of suf fi ci ent magnit ude to const itute a risk of elect ric shock to per sons.
WARNING: TO REDUCE THE RISK OF ELECTRI C SHOCK DO NO T RE MOVE COVER ( OR B A CK ) , N O U SE R SERVICEABLE PARTS INSIDE R E F E R S ER V I C I NG T O Q U A L I F I E D S E R V I C E PE RS ON NE L.
The exclamation point withi n an equilateral tria ngle is in­te nded to ale rt th e user to th e p re se nc e of i mp or ta nt operatin g and m ainte nan ce (s ervi ci ng) inst ru ction s i n th e li ter ature a cc ompan y­in g th e appli an ce .
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warning.
2.) Do not use this apparatus near water.
3.) Clean only with dry cloth.
4.) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
7.)
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
8.)
Only use attachments / accessories specified by the manufacturer.
9.)
Unplug this apparatus during lightning storms or when unused for long periods of time.
10.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
11.) This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus.
12.) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13.) Do not overload wall outlet. Use only power source as indicated.
14.) Use replacement parts as specified by the manufacturer.
15.) The product may be mounted to a wall only if recommended by the manufacturer.
16.) Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.
1
MS9903TT_ib080503.p65 5/8/2003, 11:441
Thank you............
For purchasing this Emerson complete home audio system including a stereo
radio, 3 disc changer, dual cassette deck, stereo phonograph, matching speakers,
and remote control.
Please read this Owner's
Manual carefully and completely to make sure that you
get the maximum benefit out of all the outstanding features we’ve included in this
compact system. It’s designed to give you many years of trouble free operation
with an absolute minimum of care and maintenance.
Every component in this system was in perfect working order when it left our factory.
If you experience any problems with the set up or operation of this system please
do not return it to the retail store. Please call the Emerson Customer Service
Hotline toll free at 1-800-663-5954 and one of our service technicians will attempt
to diagnose and correct the problem for you.
Once again, thanks for purchasing this Emerson audio product.
The serial number of your system is located on a label on the back panel. Please
take a moment to locate the serial number and write the number in the space
provided below. You may need this number for insurance purposes in the event
your set is damaged or lost. You may also be asked to provide this number when
requesting service.
Model Number: MS9904TTC
Serial Number:
MS9903TT_ib080503.p65 5/8/2003, 11:442
2
IMPORTANT NOTES
• Avoid installing this unit in p lac es
exposed to direct sunlight or close to heat radiating applian ce s suc h as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to constant vibration and/ or humid or moist areas.
• Do not attempt to clean this unit with
chemical solvents as this might damage
• Operate controls and switches as described in the manual.
• Before turning ‘On’ the power, make certain that power cord is pro perly installed.
• Store your CDs, cassettes in a cool area to avoid damage from heat.
• When moving the set, be sure to first disconnect the power cord.
the finish. Use a clean dry cloth.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
This product contains a low power Laser Device.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
MS9903TT_ib080503.p65 5/8/2003, 11:443
3
IMPORTANT
Since CD circuitry may cause interference to other radio tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner.
NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television (which can be determined by turning the equipment off), the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
MS9903TT_ib080503.p65 5/8/2003, 11:443
4
PREPARATION FOR USE
SPEAKER CONNECTION
Connect each speaker to the corresponding speaker terminals on the back panel
of the main unit. Make sure that the left speaker is connected to the left (L) speaker
jack and the right speaker to the right (R) speaker jack.
Right Speaker
SPEAKER
R L
Left Speaker
CONNECTING THE AC POWER CORD
After connecting the speakers unwind the AC power cord fully and connect it to any
convenient household AC outlet.
NOTE:
This product is designed to operate on normal 120V 60Hz AC only. Connecting
this system to any other power supply could result in damage to the unit which is
not covered by your warranty. You will note that this system is equipped with a
polarized AC power plug having one blade wider than the other. This is a safety
feature.
If this plug does not fit into your existing AC outlet,
do not try to defeat this safety feature by filing the
wide blade to make it fit into your outlet. If this plug
will not fit into your outlet, you probably have an out-
dated non-polarized AC outlet. You should have your
outlet changed by a qualified licensed electrician.
AC Plug
AC Outlet
MS9903TT_ib080503.p65 5/8/2003, 11:444
5
PROTECT YOUR FURNITURE !!
This model is equi pped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the product on fine wooden furniture.
MS9903TT_ib080503.p65 5/8/2003, 11:445
6
LOCATION OF CONTROLS AND INDICATORS
FRONT VIEW
101112
8
7
9
13
1
2 3
4
14
15 16
5
18
19
24
6
17
20
21
22
23
MS9903TT_ib080503.p65 5/8/2003, 11:446
7
1) STANDBY/ON Button
.
2) REPEAT Button
3) PRESET EQ Button
4) PHONES (Headphone) Jack
5) FUNCTION (PHONO/TUNER/TAPE/CD) Selector Switch
6) BAND (FM/AM) Selector Switch
7) Dial Scale
8) LCD Display
9) PLAY/PAUSE Button
10) STOP Button
11) PROGRAM Button
12) SKIP/SEARCH Reverse Button
13) SKIP/SEARCH Forward Button
14) TUNING Control
15) BALANCE Control
16) VOLUME Control
17) HI-SPEED DUBBING / FM MONO (ON /OFF ) Button
18) Cassette DECK A Door
19) Cassette DECK A Control Keys
20) Cassette DECK B Door
21) Cassette DECK B Control Keys
22) CD Tray Open/Close Button
23) Disc 1, 2, 3 Select Button
24) CD Tray
MS9903TT_ib080503.p65 5/8/2003, 11:447
8
Loading...
+ 21 hidden pages