MICRO AUDIO SYSTEM
with CD PLAYER
OWNER'S MANUAL
MS7609
Visit our web site at www.emersonradio.com
MS7609_ib040303.p65 4/4/2003, 12:1324
CAUTION
!
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle is intented to
alert the user to the presence
of uninsulated ‘dangerous voltage’
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BAC K ), NO USE R
SERVICEABLE PARTS INSIDE
REFER SERVICING TO
Q U A L I F I E D S ER VI CE
PERSONNEL.
The exclamation point within
an equilateral triangle is intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions.
2.) Keep these instructions.
3.) Heed all warnings.
4.) Follow all instructions.
5.) Do not use this apparatus near water.
6.) Clean only with dry cloth.
7.) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8.) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.) Only use attachments / accessories specified by the manufacturer.
12.) Unplug this apparatus during lightning storms or when unused for long periods of time.
13.) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14.) Do not overload wall outlet. Use only power source as indicated.
15.) Use replacement parts as specified by the manufacturer.
16.) The product may be mounted to a wall only if recommended by the manufacturer.
17.) Upon completion of any service or repairs to this product, ask the service technician
to perform safety checks.
1
MS7609_ib040303.p65 4/4/2003, 12:131
18.) Power Sources - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operation instruction.
19.) Object and Liquid Entry - Never push object of any kind into this product through
openings as they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the product.
20.) Servicing - Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY
WITH SAME TYPE 2.5A, 250V FUSE.
BEFORE WE BEGIN
Thank you for purchasing this Emerson audio product. The Emerson brand
is your assurance of quality, performance and value.
Our engineers have included many useful and convenient features in this
product. Please be sure to read this Owner’s Manual completely to make
sure you are getting the maximum benefit from each feature.
This product was manufactured using the highest quality components and
standards of workmanship. It was tested by Emerson inspectors and found
to be in perfect working order before it left our factory. However, there is
always the chance that some problem may occur because of rough handling
during shipment to the retail store or to the final consumer.
If, after reading this Manual, you experience any problems with the operation
of this product, please refer to the instructions for obtaining service at the
end of this Manual. Emerson and Emerson retailers are committed to your
satisfaction.
Once again, thanks for purchasing this Emerson audio product.
For future reference, record the serial number in the space provided.
Model No: MS7609
Serial Number :
2
MS7609_ib040303.p65 4/4/2003, 12:132
IMPORTANT NOTES
• Avoid installing this unit in places
exposed to direct sunlight or close to
heat radiating appliances suc h as
electric heaters, on top of other stereo
equipment that radiates heat, places
lacking ventilation or dusty areas,
places subject to constant vibration
and/or humid or moist areas.
• Do not attempt to clean this unit with
chemical solvents as this might
damage the finish. Use a clean dry
cloth.
• Operate controls and switches as
described in the manual.
• Before turning on the power, make
certain that the connecting cords and
power cord are properly installed.
• Store your CDs in a cool area to avoid
damage from heat.
• When moving the set, be sure to first
dis connect the power cord and
remove cords connected to other
equipment.
CLASS 1 LASER PRODUCT
CAUTION
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This product contains a low power Laser Device.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection agains t harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
MS7609_ib040303.p65 4/4/2003, 12:133
3
PREPARATION FOR USE
RED
Black Wire
UNPACKING AND SET-UP
• Carefully remove the unit from the carton and remove all packing material
from the unit.
• Remove any labels or stickers which may be on the front or top of the set, but
do not remove any labels from the back or bottom.
• We suggest that you retain the original carton and packing materials in case it
ever becomes necessary to return your unit for service. This is the only sure
way to protect the unit from damage in transit.
• If you do dispose of the carton and pack ing materials, please do so properly.
Emerson cares about our environment.
• Pres s the CD DOOR OPEN button and remov e the dummy CD transit
protection card from the CD mechanism. Discard it.
SPEAKER CONNECTION
Connect each speaker to the corresponding speaker terminals on the back panel
of the main unit. Make sure that the left speaker is connected to the left (L) pair of
speaker terminals and the right speaker to the right (R) pair of speaker terminals.
Also make sure that the speaker wires are correctly connected: that the red wires
are connected to the red terminals and the black wires to the black terminals.
Depress the plastic lever to open the terminal, insert the bare end of the speaker
wire into the opening and release.
Red Wire
BLACKRED
R
L
4
MS7609_ib040303.p65 4/4/2003, 12:134
RIGHT SPEAKER LEFT SPEAKER
BLACK WIRE
RED WIRE
BLACK WIRE
RED WIRE
PROTECT YOUR FURNITURE !!
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood preservatives,
or c leaning sprays may cause the rubber 'feet' to soften, and leave marks or a
rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware
stores and home improvement centers everywhere, and apply these pads to the
bottom of the rubber 'feet' before you place the product on fine wooden furniture.
5
MS7609_ib040303.p65 4/4/2003, 12:135
POWER SOURCE
AC Outlet
This system is designed to operate on 120V 60Hz AC house current . Connecting
this system to any other power supply could result in damage to the unit which is
not covered by your warranty.You will note that this system is equipped with a
polarized AC power plug having one blade wider than the other. This is a safety
feature. If this plug does not fit into your existing AC outlet, do not try to defeat this
safety feature by filing the wide blade to make it fit into your outlet. If this plug will
not fit into your outlet, you probably have an out-dated non-polarized AC outlet.
You should have your outlet changed by a qualified licensed electrician.
AC Plug
AC OPERATION
1.) Unwind the AC Power Cord completely.
2.) Insert the plug into any convenient 120V 60Hz AC outlet.
6
MS7609_ib040303.p65 4/4/2003, 12:136
LOCATION OF CONTROLS AND INDICATORS
TOP PANEL
9
8
7
6
5
4
3
2
1
19
BACK PANEL
21
20
1.) Remote Control SENSOR.
2.) Reverse SKIP/SEARCH Button.
3.) PROGRAM Button.
4.) REPEAT Button.
5.) POWER On/Off Button.
7.) PHONES Jack.
6.) STANDBY LED Indicator.
8.) CD Compartment.
9.) TUNING Control.
10.) AM/FM/FM ST. Selector.
10
11
12
13
14
15
16
17
18
22
11.) CD/RADIO Selector.
12.) BASS BOOST ON/OFF Selector.
13.) CD DOOR OPEN Button.
14.) PLAY/PAUSE Button.
15.) VOLUME UP Button.
16.) VOLUME DOWN Button.
17.) STOP Button.
18.) Multi Function LCD Display.
19.) Forward SKIP/SEARCH Button.
20.) FM Wire Antenna.
21.) Speaker Terminals.
22.) AC Power Cord.
MS7609_ib040303.p65 4/4/2003, 12:137
7
REMOTE CONTROL
1.) POWER Button.
2.) PLAY/PAUSE Button.
3.) RANDOM Button.
4.) REPEAT Button.
5.) Reverse SKIP/SEARCH Button.
6.) VOLUME Button.
7.) Battery Compartment (Back cabinet)
8.) VOLUME Button.
9.) Forward SKIP/SEARCH Button.
10.) MUTE Button.
11.) STOP Button.
1
2
3
4
5
6
11
10
9
8
7
BATTERY INSTALLATION
Insert 2 pcs ‘AA’ size (Alkaline) batteries (not included) into the battery compartment
of the remote controller. Be sure to observe the polarity markings which are
engraved inside the battery compartment, then close the cover.
BATTERY REPLACEMENT
When the batteries become too weak , the operating distance of the remote
controller is greatly reduced and you will need to replace the batteries.
8
MS7609_ib040303.p65 4/4/2003, 12:138
NOTES:
• To maintain the accuracy and long life of the transmitter, do not press two or
more buttons simultaneously.
• If the remote control is not to be used for a long time, remove the batteries to
prevent possible damage through leaking batteries.
• Do not mix different types of batteries, or old batteries with new ones.
USING THE REMOTE CONTROLLER CORRECTLY
• Point the remote controller at the Remote Sensor.
• The functions of the buttons on the remote c ontrol are the same as the
corresponding controls on the main unit.
• When there is a strong ambient light source, the performance of the infrared
Remote Sensor may be degraded, causing unreliable operation.
• The maximum effective distance for remote control operation is about 15 feet.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
MS7609_ib040303.p65 4/4/2003, 12:139
9
OPERATING INSTRUCTIONS
LISTENING TO RADIO
TUNER INFORMATION
This system features a normal AM/FM analog tuning system. Unlike a digital tuner
it does not automatically lock in on the exact frequency of a station. However
instead of a dial scale and a moving dial pointer we have included a digital frequency
display to help you tune more accurately. Do not be concerned if you cannot easily
tune the display to the exact frequency of your favorite stations, especially on the
AM band. Slowly rotate the TUNING control until the display approaches the
frequenc y of the desired station and stop when get the strongest, noise free
reception - even if the display is not indicating the exact frequency of desired station.
VOLUME AND BASS BOOST CONTROLS
This model features electronic UP/DOWN volume controls on both the
main unit and the remote handset. Press the VOLUME UP or DOWN
button to raise or lower the volume.
Slide the BASS BOOST switch on the main unit to the 'ON' position to
provide increased bass response, especially at lower v olume levels. If you
are listening to music with heavy bass at high volume lev els slide the BASS
BOOST switch to the 'OFF' position to prevent distortion.
10
MS7609_ib040303.p65 4/4/2003, 12:1310
OPERATION
412
3
5
5
1.) Press the POWER button on the main unit or the remote control. The main
display lighting comes ‘On’ and the STANDBY LED indicator goes ‘Off’.
2.) Select the Radio function by switching the CD/RADIO selector to RADIO
position.
3.) Select the desired band (AM, FM or FM ST.) with the Band selector switch.
4.) Rotate the TUNING control until the exact
frequency of the desired station appears on
the dis play. If you have tuned to an FM
Stereo station and the Band selector is set to
FM
FM ST, the stereo indicator will appear in the
display.
Note: If you are listening to a weak or distant FM Stereo station and
reception fades or is noisy, setting the Band selector to the FM position
will normally provide some improv ement. However the sound will no
longer be in s tereo.
5.) Adjust VOLUME level and BASS BOOST control as desired.
6.) When you are finished listening press the POWER button on the main unit
or the remote control to turn the power 'Off'. The main display lighting goes 'Off'
and the STANDBY LED indicator comes 'On' again.
11
MS7609_ib040303.p65 4/4/2003, 12:1311
ANTENNA
FM
For FM reception there is a built-in FM antenna wire at the rear of the unit. Unravel
the wire and move it around to obtain the best reception.
AM
The AM bar antenna is inside the cabinet. To improve AM reception, you may have
to move or slightly rotate the main unit until you obtain the best reception.
MS7609_ib040303.p65 4/4/2003, 12:1312
12
PLAYING COMPACT DISCS
D
C
NORMAL PLAYBACK
1.) Press the POWER button on the main unit or the remote control. The main
display lighting comes 'On' and the STANDBY LED indicator goes 'Off'.
2.) Set the CD/RADIO selector to the CD position.
Two bars "– –" will flash in the display for a few
seconds while the player tries to read the disc
and then "00" will appear, indicating that there is
no disc in the player.
3.) Press the CD door OPEN button to open
the CD door. Place a CD on the center
spindle with the printed label side facing up.
Gently press down on the disc near the
center hole to make sure that the disc is
properly 'seated' on the spindle.
S
M
U
S
I
I
C
4.) Press down on the CD door until it closes
completely and locks. The disc will begin to spin
for a few seconds while the player reads the table
of contents, then the disc will stop and the display
will show the total number of tracks on the disc.
5.) Press the PLAY/PAUSE button to begin
PLAY
playback. The PLAY indicator appears in the
display and playback begins on track 1.
6.) Adjust the VOLUME and BASS BOOST controls as desired.
7.) When the last track has played the disc stops automatically. To stop playback
at any time before the disc ends press the STOP button. The display again
shows the total number of tracks on the disc.
13
MS7609_ib040303.p65 4/4/2003, 12:1313
PAUSE CONTROL
To pause temporarily during playback press the
PLAY/PAUSE button again. The sound stops
and the PLAY indicator flashes, but the disc continues
PLAY
to spin. Press the PLAY/PAUSE button once
more to cancel pause and resume normal playback.
The PLAY indicator stops flashing.
SKIP/SEARCH ( / ) CONTROLS
To start playback from a specific track insert
your disc and wait for the display to show the
total number of tracks. Press either the or
SKIP/SEARCH button until the desired
track number appears on the display, then
press the PLAY/PAUSE button to begin
playback on that track.
To skip tracks during playback press either the or SKIP/SEARCH buttons
until the desired track number appears on the display. Playback will begin on the
desired track.
During playback, to quickly search within a track for a specific musical passage
depress and hold either the or SKIP/SEARCH buttons. The player will move
forward or backward at high speed. When you hear the desired passage release the
or buttons. Normal playback will resume at that point.
14
MS7609_ib040303.p65 4/4/2003, 12:1314
REPEAT PLAYBACK
REPEAT
REPEAT
You can repeat either a single track or the entire disc continuously. Repeat function
can be activated while the disc is playing or while the disc is stopped, but there must
be a disc in the player.
To Repeat A Single Track:
• Press the or button to select the desired track.
• Press the REPEAT button once. The REPEAT
indicator flashes.
• Press the PLAY/PAUSE button to begin
playback . The selected track will be repeated
continuously.
To Repeat The Entire Disc
• Press the REPEAT button twice. The REPEAT
indicator remains 'On'.
• Press the PLAY/PAUSE button to begin
playback . The entire disc will be repeated
continuously.
PLAY
PLAY
To Cancel Repeat Playback
Press the REPEAT button until the REPEAT indicator disappears, or press the
STOP button. Repeat function will also be canceled if you open the CD door or
switch to the RADIO function.
15
MS7609_ib040303.p65 4/4/2003, 12:1315
RANDOM PLAYBACK (On Remote Control Only)
RANDOM
The Random function can be activated while the disc is playing or while the disc is
stopped, but there must be a disc in the player.
• Load your disc and wait until the total tracks appear on the display.
• Press the RANDOM button on the remote control. The RANDOM indicator
appears in the display.
• Press the PLAY/PAUSE button. The PLAY
indicator also appears. The player will s elect a
track at random and begin playback. After all
tracks have played in random order the player
stops automatically and the display again shows
the total tracks.
To cancel Random playback press the RANDOM button until the RANDOM
indicator disappears. You may also cancel the Random function by pressing the
STOP button twice, or by switching from CD to RADIO function.
PLAY
16
MS7609_ib040303.p65 4/4/2003, 12:1316
PROGRAMMED PLAYBACK
PROGRAM
PROGRAM
PROGRAM
Notes:
• You can program up to 20 tracks on a disc to playback in any desired
order. The same track number can be programmed to play several
times if desired.
• There is no PROGRAM button on the remote control. The PROGRAM
button is located on the main unit only.
• The player mus t be in the Stop mode to enter a program. You cannot
enter a program while a disc is play ing.
1.) Load your disc and wait for the total tracks to appear. If the disc is playing press
the STOP button and wait for the total tracks to appear.
2.) Press the PROGRAM button on the main unit.
The PROGRAM indicator and program number
"01" begin flashing in the display.
3.) Press the SKIP/SEARCH ( / ) buttons to
select the first track to be programmed.
(Example: Track Number 7).
4.) When the desired track number appears in the
display press the PROGRAM button again. The
track number disappears and the program
number advances to "02".
5.) Press the / buttons to select the next track to be programmed. When the
desired track number appears in the display press the PROGRAM button to
enter that track in the program memory and advance the display to the next
program number.
6.) Repeat Step 5 until you have entered up to 20 tracks in the memory.
17
MS7609_ib040303.p65 4/4/2003, 12:1317
7.) Press the PLAY/PAUSE button to begin
PROGRAM
PROGRAM
REPEAT
programmed playback. The PLAY indicator
PLAY
appears together with the PROGRAM indicator.
Playback will begin on the first programmed
track and continue until all of the programmed
tracks have been played.
Note: If the / SKIP/SEARCH button are pressed during programmed
playback the player will skip forward or back to the next track in the
programmed sequence, not the next track on the disc.
After all of the programmed tracks have been played the player stops and the PLAY
indicator disappears. But the PROGRAM indicator remains in the display and the
programmed sequence remains in the memory. If you press the PLAY/PAUSE
button the programmed sequenc e will play again. To cancel the program from
memory press the STOP button again. The PROGRAM indicator disappears.
PROGRAMMED REPEAT PLAYBACK
To repeat a programmed sequence continuously, first enter the desired tracks in the
program memory as described above, then press the
REPEAT button twice so that the PROGRAM and
REPEAT indicators both appear in the display, and
press the PLAY/PAUSE button to begin playback.
PLAY
18
MS7609_ib040303.p65 4/4/2003, 12:1318
MUTE CONTROL (On Remote Control Only)
To shut off the sound of the radio or the CD temporarily press the MUTE button on
the remote control. The speakers shut off and the STANDBY LED indicator flashes.
Press the MUTE button again to cancel mute and restore the sound. The STANDBY
LED indicator goes 'Off'.
STANDBY LED Indicator
STEREO HEADPHONE JACK
For private listening without disturbing others connect a set of stereo headphones
(not included) to the PHONES Jack on the left side panel. The built-in speakers
automatically shut off when stereo headphones are connected to the headphone
jack. When using stereo headphones always start with the volume control set to a
low level and gradually increase until you find the desired level.
MS7609_ib040303.p65 4/4/2003, 12:1319
19
CARE AND MAINTENANCE
COMPACT DISC CARE
• To remove a disc from its storage case, press down on the centre of the case
and lift the disc outs, holding it carefully by the edges.
• Fingerprints and dust should be carefully wiped off the disc’s recorded surface
with a soft cloth.Unlike conventional records, compact discs have no grooves
to collect dust and microscopic debris, so gently wiping with a soft cloth should
remove most particles. Wipe in a straight line from the inside to the outside of
the disc. Small dust particles and light stains will have absolutely no effect on
reproduction quality.
• Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents
or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
• Never write on or affix labels to the surface of compact discs.
CARE OF THE CABINETS
• If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use
any wax or polish sprays on the cabinets.
• If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never
use abrasive cloths or polishes as these will mar the finish of your unit.
CAUTION:
Never allow any water or other liquids to get inside the unit while cleaning.
20
MS7609_ib040303.p65 4/4/2003, 12:1320
TROUBLESHOOTING GUIDE
R
Should this unit exhibit a problem, check the following before seeking service.
Symptom Possible Cause Solution
Radio
Noise or sound Station not tuned properly for Retune the AM or FM
distorted on AM or AM or FM. broadcast station.
FM broadcasts. FM : Wire antenna is not Extend FM Wire antenna.
extended.
AM: The unit is not positioned Reposition the unit until
correctly. best reception is obtained.
FM Sereo indicator FM station is mono or station Extend FM Wire antenna.
does not light. signal is weak. Try other strong stations.
AM or FM, no sound. Function is not set to RADIO. Switch CD/RADIO selector
to RADIO position.
Volume at minimum. Increase Volume.
Compact Disc Player
CD Player will not Function is not set to CD. Switch CD/RADIO selector
play. to CD position.
CD is not installed or Insert CD with Iabel side
installed incorrectly. up.
CD skips while playing. Disc is dirty or scratched. Wipe disc with cloth or use
another disc.
SERVICE
CALL TOLL FREE: 1-800-695-0098
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE
FOR CUSTOMER SERVICE,PLEASE WRITE TO:
MS7609_ib040303.p65 4/4/2003, 12:1321
TO FIND THE LOCATION AND PHONE
NUMBER OF YOUR NEAREST SERVICE
CENTER PERMITTED TO PERFORM
WARRANTY...
PLEASE CALL:
1-800-898-9020
Emerson Radio Corp.,
Consumer Affairs Dept.,
1901 Diplomat Drive,
Farmers Branch, TX 75234.
21
LIMITED WARRANTY
Emerson Radio Corp. warrants manufacturing defects in original material, including
original parts and workmanship, under normal use and conditions, for a period of
ninety (90) days from the date of original purchase in the U.S. With your dated
proof of purchase, we will provide repair service at no charge for labor and parts
at an authorized Depot Repair Facility, or replace the product in our discretion.
For repair or replacement, pack your unit in a padded box, enclose your check or
money order payable to Emerson Radio Corp. in the amount of $9.00 (not required
by California residents) to cover shipping and handling costs, and enclose a copy
of your proof of purchase. Send your unit to:
Emerson Radio Corp.
1901 Diplomat Drive.
Farmers Branch, TX 75234.
This warranty does not cover damage from negligence, misuse, abuse, accident,
failure to follow operating instructions, commercial use, rental, repairs by an
unauthorized facility, or products purchased, used, serviced or damaged outside
of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
AU898M
22
MS7609_ib040303.p65 4/4/2003, 12:1322
EMERSON
Part No. : 16-2901
303-01
EMERSON RADIO CORP.
Printed in China
MS7609_ib040303.p65 4/4/2003, 12:1323
Loading...