Instruction Manual
MCK-2134
July 2014
Special Service Product
Special Service Product Instruction Manual
WARNING
!
Failure to follow these instructions or
to properly install and maintain this
equipment could result in an explosion,
re and/or chemical contamination
causing property damage and personal
injury or death.
Fisher® equipment must be installed,
operated and maintained in accordance
with federal, state and local codes and
Fisher instructions.
Only personnel trained in the proper
procedures, codes, standards and
regulations of the applicable industrial
service should install and service
this equipment.
Introduction
Scope of the Manual
This manual directs the user to the applicable
instruction manual for Fisher products used in “Special
Service” applications, typically liqueed compressed
gases other than Anhydrous Ammonia or Liqueed
Petroleum Gases.
Refer to Table 1 for Special Service Type numbers
referenced in this manual and for a cross-reference
to the Instruction Manual to be used for Special
Service products.
Use, install and maintain the Special Service type
number per MCK 2134 and the applicable instruction
manual referenced in Table 1.
Note
Reference to the specic Special Service
type number may or may not appear in
the applicable Instruction Manual, but
the Description, Principle of Operation,
Installation, Maintenance and Repair and
other information will be applicable to
the Special Service type number. Special
Service type numbers typically differ only
in the markings and seal materials.
These products are serialized for the service specied
with the order. The valves can be used on other
compressed gases, but the user should check with the
factory to make sure the valve materials are suitable
for the intended service.
Documentation On-Line
Instruction Manuals in the desired language will soon
be available for most products on the Internet for
immediate viewing and download. Until then, contact
local Sales Ofce and we will provide the Instruction
Manuals in pdf format. (To view a .pdf le Acrobat
Reader software must be loaded on your computer.
Acrobat Reader software latest version is available
free on the www.adobe.com website.)
www.fisherregulators.com
D450129T012
Special Service Product
Table 1. Special Service Type Number Instruction Manual Cross Reference
SPECIAL SERVICE TYPE NUMBER
C801-16 and -24 MCK 1104 D450022T012
C802-16 and -24 MCK 1104 D450022T012
C803-24 MCK 1136 D450034T012
C804-24 MCK 1136 D450034T012
C804T32, C804V32 and C804H32 MCK 1171 D450053T012
C807-10 MCK 1172 D450057T012
C807S-10 MCK 1172 D450057T012
C807-16 and -24 MCK 1104 D450022T012
C807C-16 and -24 MCK 1104 D450022T012
C807S-16 and -24 MCK 1104 D450022T012
C821-16 and -24 MCK 1104 D450022T012
C827-16 and -24 MCK 1104 D450022T012
C831-16 and -24 MCK 1185 D450090T012
C831S-16 and -24 MCK 1185 D450090T012
H822 MCK 2104 D450126T012
H832A MCK 2104 D450126T012
H882 MCK 2104 D450126T012
H8112 MCK 2104 D450126T012
N801T-04, -06 and -08 MCK 1100 D450019T012
N810T-10, -12, 16, -24 and -24F MCK 1100 D450019T012
N901T-04, -06 and -08 MCK 1100 D450019T012
N910T-10, -12, 16, -24 and -24F MCK 1100 D450019T012
N851-10, 16 and -24 - - - - D450343T012
N862 MCK 1151 D450041T012
1. Special service type numbers also include sufxes indicating trim material, setpoint or excess ow rates.
(1)
USE INSTRUCTION MANUAL INSTRUCTION MANUAL PART NUMBER
Internal Valves
Relief Valves
Globe and Angle Valves
Emergency Shutoff Valves
LP-Gas Equipment
Emerson Process Management
Regulator Technologies, Inc.
USA - Headquarters
McKinney, Texas 75070 USA
Tel: +1 800 558 5853
Outside U.S.: +1 972 548 3574
For further information visit www.fisherregulators.com
The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners. Fisher® is a mark owned by Fisher Controls International LLC,
a business of Emerson Process Management.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or
guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specications of such
products at any time without notice.
Emerson Process Management Regulator Technologies, Inc. does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and
maintenance of any Emerson Process Management Regulator Technologies, Inc. product remains solely with the purchaser.
©Emerson Process Management Regulator Technologies, Inc., 2002, 2014; All Rights Reserved