EMERSON ADN2.5-24-1PM, ADN4-24-1PP, ADN4-24-1PM, ADN5-24-1PM, ADN10-24-1PM User Manual

rev 09.08.05

Technical Support: (888) 41ASTEC or [phone]

Americas: [phone] Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662

190

Special Features

60-480 Watts

ADN Series

Electrical Specs

• Power Factor Correction

• Auto Select 115/230 VAC, 50/60 Hz Input

• All Single Phase models meet SEMI F47
Sag Immunity

• Class 1, Div 2 Hazardous Locations

• DC OK Signal

• Adjusable Voltage

• Industrial grade design (no derating to 60°C)

• User-friendly front panel

• Single and three phase inputs available

• Highly efficent >90% switching technology

• High MTBF and reliability

• Peak current capability 2x rated current
for 2 seconds

• Three year warranty

• NEC Class 2 on models <100W

Input

Nominal voltage 115/230 VAC auto select
Power factor (PFC) EN61000-3-2
AC Input range 85-123 / 176-264VAC
DC Input range 210-375VDC
Frequency 47-63 Hz, 500 Hz

Output

Nominal voltage 24V (22.5-28.5VDC Adj.)
Holdup time > 20ms at full load (25°C)
Tolerance < ±2 % overall

(combination line/load/time/temp)
Tolerance < ±2 % overall
Line regulation <0.5%
Load regulation <0.5%
Time & temp. drift <1%
Initial voltage setting 24.5V ± 1%
Ripple < 50mVpp
Power back immunity > 35V
Parallel Operation

ADN20-24-1PM Switch selectable
All others Jumper selectable via front panel

Over voltage protection < 33VDC

Storage/Shipment -25°C to +85°C
Operating (convection) -10° C to +60° C (derate

to 50% at +70° C)

Humidity <90% RH noncondensing per

IEC 68-2-2, 68-2-3
IP20 (EN60529), protection
from moisture & condensation

EMC
Emissions EN 61000-6-3, Class B EN55011, EN55022 Radiated

Conducted including Annex A

Immunity EN 61000-6-2, EN61000-4-2 Level 4, EN61000-4-3

Level 3, EN61000-4-6 Level 3, EN61000-4-4 Level 4
input and level 3 output. EN61000-4-5 Isolation class
4, EN61000-4-11, Transient protection according to
VDE 0160/W2 over entire load range.

Approvals EN60950, UL508 Listed, cULus, UL 60950, cURus, CE

(LVD 73/23 & 93/68/EEC), (EMC 89/336 & 93/68/EEC).
EN61000-3-2, EN60079-15 (Class 1, Division 2
hazardous location, Groups A, B, C, D w/ T3 temp
class up to 60°C Ambient.) SEMIF47 Sag Immunity.
For models <100W, UL60950 testing to include
approval as NEC Class 2 power supply acc. To NFPA 70
art. 725-41 (a)(2).

Protection Class 1 (IEC536), degree of protection

SELV rated per EN60950

Environmental

Safety

Total Power: 60 - 480 Watts
Input Voltage: 115/230 VAC
# of Outputs: One

EUROPE

Astec House, Waterfront Business Park

Merry Hill, Dudley

West Midlands, DY5 1LX, UK

Telephone: [phone]

Facsimile: 44 (1384) 843-355

AMERICAS

5810 Van Allen Way
Carlsbad, CA 92008

Telephone: [phone]

Facsimile: 760-930-0698

191

www.astecpower.com

Ordering Information

ASIA

Units 2111-2116, Level 21

Tower1, Metroplaza

223, Hing Fong Road

Kwai Fong, New Territories

Hong Kong

Telephone: [phone]

Facsimile: 852-2402-4426

Model Weight Power Voltage Current Case Type

ADN2.5-24-1PM 1.6 lbs. (725g) 60W 85-264VAC 2.5A metal

90-375VDC

ADN4-24-1PP 0.7 lbs. (320g) 93W 85-132 / 176-264VAC 3.8A plastic

210-375VDC

ADN4-24-1PM 2.4 lbs. (1055g) 100W 85-132 / 176-264VAC 4A metal

210-375VDC

ADN5-24-1PM 2.4 lbs. (1055g) 120W 85-132 / 176-264VAC 5A metal

210-375VDC

ADN10-24-1PM 3.3 lbs. (1480g) 240W 85-132 / 176-264VAC 10A metal

210-375VDC

ADN20-24-1PM 3.4 lbs. (1520g) 480W 85-132 / 176-264VAC 20A metal

DIMENSIONS(inches)

Height Width Depth

ADN2.5-24-1PM 4.88 1.97 4.55

ADN4-24-1PP 2.95 2.85 3.80

ADN4-24-1PM 4.88 2.56 4.55

ADN5-24-1PM 4.88 2.56 4.55

ADN10-24-1PM 4.88 3.26 4.55

ADN20-24-1PM 4.88 6.88 4.66

ADN2.5 thru ADN10

ADN20