LZWSM8*, LZWSMD*, LZWSM8P*, LZWSMDP*, LZWSM8*-2, LZWSM8*-3, LZWSMD*-2, LZWSMD*-3, LZWSM8P*-2, LZWSM8P*-3, LZWSMDP*-2, LZWSMDP*-3
EZWSM8*, EZWSMD*, EZWSM8P*, EZWSMDP*, EZWSM8*-2, EZWSM8*-3, EZWSMD*-2, EZWSMD*-3, EZWSM8P*-2, EZWSM8P*-3, EZWSMDP*-2, EZWSMDP*-3
Installation/Care/Use Manual
EZH20 In Wall Bottle Filling S tation
LZWSM8* LZWSMD* LZWSM8P* LZWSMDP*
EZWSM8* EZWSMD* EZWSM8P* EZWSMDP*
Installer
T o assure you install this model easily and correctly ,
PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE ST ARTING THE
INST ALLATION. CHECK YOUR INST ALLATION FOR COMPLIANCE WITH
PLUMBING , ELECTRICAL AND OTHER APPLICABLE CODES. After installation, leave
these instructions inside the fountain for future reference.
IMPORTANT
ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON
IMPORTANT! INSTALLER PLEASE NOTE.
THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO
WA TER LINES IS A COMMON PROCEDURE. THIS GROUNDING MA Y BE IN THE BUILDING OR MA Y
OCCUR A WA Y FROM THE BUILDING . THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK
INTO A FOUNT AIN, CREA TING AN ELECTROL YSIS WHICH CAUSES A MET ALLIC T ASTE OR AN
INCREASE IN THE METAL CONTENT OF THE WATER. THIS CONDITION IS A VOIDABLE BY USING
THE PROPER MA TERIALS AS INDICA TED. ANY DRAIN FITTINGS PROVIDED BY THE INST ALLER
SHOULD BE MADE OF PLASTIC TO ELECTRICALL Y ISOLA TE THE FOUNT AIN FROM THE BUILDING
PLUMBING SYSTEM. WE SUGGEST THA T THE BOTTLE FILLER BE PROTECTED BY A GROUND
FAUL T CIRCUIT INTERRUPTER (GFCI)
1/4" O.D. TUBE
WATER INLET
TO COOLER
3/8" O.D. UNPLATED
COPPER TUBE CONNECT
COLD WATER SUPPLY
NOTE: WATER FLOW
DIRECTION
BUILDING WATER
INLET
SERVICE STOP
(NOT FURNISHED)
PAGE 1
FIG. 2FIG. 1
98557C (Rev. E - 5/2011)
LZWSM8*, LZWSMD*, LZWSM8P*, LZWSMDP*, LZWSM8*-2, LZWSM8*-3, LZWSMD*-2, LZWSMD*-3, LZWSM8P*-2, LZWSM8P*-3, LZWSMDP*-2, LZWSMDP*-3
EZWSM8*, EZWSMD*, EZWSM8P*, EZWSMDP*, EZWSM8*-2, EZWSM8*-3, EZWSMD*-2, EZWSMD*-3, EZWSM8P*-2, EZWSM8P*-3, EZWSMDP*-2, EZWSMDP*-3
LZWSM8P*, LZWSMDP* EZWSM8P*, EZWSMDP* ROUGH-IN
98557C (Rev. E - 5/2011)
FIG. 3
PAGE 2
LZWSM8*, LZWSMD*, LZWSM8P*, LZWSMDP*, LZWSM8*-2, LZWSM8*-3, LZWSMD*-2, LZWSMD*-3, LZWSM8P*-2, LZWSM8P*-3, LZWSMDP*-2, LZWSMDP*-3
EZWSM8*, EZWSMD*, EZWSM8P*, EZWSMDP*, EZWSM8*-2, EZWSM8*-3, EZWSMD*-2, EZWSMD*-3, EZWSM8P*-2, EZWSM8P*-3, EZWSMDP*-2, EZWSMDP*-3
LZWSM8*, LZWSMD* EZWSM8*, EZWSMD* ROUGH-IN
FIG. 4
PAGE 2
98557C (Rev. E - 5/2011)