Elkay EZWS-ERFP8-RF User Manual

SPECIFICATIONS

PRODUCT SPECIFICATION

In-wall EZWS-ERFP8-RF Retro-t system will update existing
refrigerated Bi-Level Soft Sides® installations with an integrated
Bottle Filler system. Units shall be stainless steel construction
with plastic ABS alcove. Sensor activation with an auto 20-second
shut-off timer. Shall include GreenTicker™ displaying count of
plastic bottles saved from waste. Bottle ller shall provide 1.1 gpm
ow rate with laminar ow to minimize splashing. Shall include
integrated silver ion anti-microbial protection in key areas. Bottle
ller meets ADA guidelines for reach range; fountain meets ADA
guidelines for wheelchair access. Unit shall be lead-free design
which is certied to NSF/ANSI 61 and 372 and meets Federal and
State low-lead requirements. Unit shall be certied to UL399 and
CAN/CSA 22.2 No. 120.

STANDARD FEATURES

Bottle Filler

• No-touch, sensor-activated operation.

• Auto 20-second shut-off.

• Integrated Silver Ion Anti-microbial Protection in key areas.

• Quick Fill Rate: 1.1 gpm.

• Laminar Flow provides minimal splash.

• Real Drain System eliminates standing water.

• Visual User Interface display includes:

• Innovative Green Ticker™ counts bottles saved from waste.

FOUNTAINS / COOLING SYSTEM

One fountain, one mounting frame (for lower fountain installation)
and the cooling system are reused from the current existing
installation.

CAPACITIES CHART

Model

Voltage /

Hertz

Chilling

Capacity

F.L.

Amps

Rated
Watts

Approx.

Ship

Weight.

EZH2O® In Wall Bottle Filling Station

Retro-t Model for

Soft Sides® Refrigerated Fountain

Model EZWS-ERFP8-RF

RATED FOR INDOOR USE ONLY

Model

EZWS-ERFP8-RF

CONSTRUCTION

• Stainless steel bottle ller construction with ABS plastic alcove.

• Includes ventilating louvered grille with fountain.

• Furnished with open wall frame mounting box constructed of
galvanized steel.

Each EZWS-ERFP8-RF is shipped in one carton containing:

• Upper panel with installed bottle ller

• Lower panel with ventilation louvers

• Mounting frame for bottle ller

• Misc. hardware

Warranty: Electrical components and water system are warranted
for 12 months from date of installation or 18 months from factory
shipment, whichever date falls rst.

EZWS-ERFP8-RF

The above ratings apply only to the EZWS-ERFP8-RF unit.
Ratings for cooler not included.

In keeping with our policy of continuing product
improvement, Elkay reserves the right to change

specication without notice. Please visit elkayusa.com

115V /

60Hz

Based on

Existing

Cooler

Rating

1.0 15 50

CERTIFICATIONS / STANDARDS

• ADA Compliant

• UL399 and CAN/CSA 22.2 No. 120 Certied

• ANSI/NSF 61 and 372 Certied

• GreenSpec® Listed

This specication describes an Elkay product with design, quality
and functional benets to the user. When making a comparison of
other producer’s offerings, be certain these features are not over­looked.

2222 Camden Court
OakBrook, IL 60523

630-572-3192

SPEC00058 (Rev 09/2014)

2013 Elkay

EZH2O® In Wall Bottle Filling Station

Retro-t Model for
Soft Sides® Refrigerated Fountain
Model EZWS-ERFP8-RF

ROUGH-IN

Job Name: ____________________________________
Date: ________________________ Qty. ____________
Contact Info (Name, Phone, Email): ________________
_____________________________________________
_____________________________________________
Approval: _____________________________________

INSTALLATION STEPS

Disassemble current Bi-Level Refrigerated
fountain installation

Remove left hand mounting frame, replace
with new open frame (included)

IMPORTANT!

*Rated for indoor use only

EZWS-ERFP8-RF Retro-t is designed to t on an existing Soft Sides® refrig­erated style fountain which is properly installed per the Spec Sheet rough-in
information.

ELECTRICAL

EZWS-ERFP8-RF equipped with electrical cord and three-prong molded rubber

plug for use with 15-amp minimum receptacle. Rated at 115V/60Hz, single phase.

Reassemble installation with new upper panel / Bottle Filler as­sembly, original fountain, original lower mounting frame, chiller
shelf, chiller unit and new lower panel assembly

Typical current installation with fountains
and panels removed

BOTTLE FILLER / FOUNTAIN INSTALLATION AFTER RETRO-FIT CONVERSION

38 1/2"
978mm

ACTIVATION
SENSOR

22 15/16"
583mm

17 7/8"
455mm

9 13/16"
249mm

18 13/16"
478mm

12 1/8"
308mm

3 13/16"
97mm

30 1/16"
764mm

33 7/16"
849mm

1 5/8"
41mm

27"
686mm

ADA

REQUIREMENT

A

18 5/8"
473mm

5/8"
16mm

23 5/16"
592mm

31 1/4"
794mm

FINISHED FLOOR

2014Elkay
SPEC00058 (Rev 09/2014)

2222 Camden Court
Oak Brook, IL 60523

elkay.com

4 1/2"
114mm

Printed in U.S.A.

©2014 Elkay