Elkay EZSTL8WS, EZSTLDDWS User Manual

SPECIFICATIONS

EZH2O® Bottle Filling Station

Versatile Bi-Level EZ Cooler

Models EZSTL8WS & EZSTLDDWS

PRODUCT SPECIFICATION

Unit shall include electric water cooler with bottle lling station. EZSTL8WS shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet water. EZSTLDDWS shall deliver non-chilled drinking water. Cooler units shall have pushbar activation. Bottle lling unit shall include an electronic sensor for touchless activation with auto 20-second shut-off timer. Shall include Green Ticker™ displaying count of plastic bottles saved from waste. Bottle ller shall provide 1.1-1.5 gpm ow rate with laminar ow to minimize splashing. Shall include integrated silver ion anti-microbial protection in key areas. Unit shall meet ADA guidelines. Unit shall be lead-free design which is certied to NSF/ANSI 61 and 372 and meets Federal and State low-lead requirements. Unit shall be certied to UL399 and CAN/CSA 22.2 No. 120.

STANDARD FEATURES

• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)

• Easy-Touch front and side pushbar controls (Cooler)

• Integrated Silver Ion Anti-microbial Protection in key areas

• Quick Fill Rate: 1.1 gpm (EZSTL8WS); 1.5 gpm (EZSTLDDWS)

• Laminar Flow provides minimal splash

• Real Drain System eliminates standing water

• Visual User Interface display includes:

• Innovative Green Ticker™ counts bottles saved from waste

• Available with Flexi-Guard® bubbler or Vandal-resistantt bubbler

(tincludes “VR” code in model no. see chart below)

• Versatile cooler design allows units to be installed either left-hand high and right-hand low or left-low and right high

• Cooler panel nishes: Light Gray Granite Vinyl Clad Steel or Stainless

Steel

COOLING SYSTEM (Models EZSTL8WS & EZSTL8WSVR only)

• Compressor: hermetically-sealed, reciprocating type, single phase. Sealed-in lifetime lubrication.

• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is permanently lubricated.

• Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous copper tubing with stainless steel tank. Fully insulated with EPS foam which meets UL requirements for self-extinguishing material.

• Refrigerant Control: Refrigerant R134a is controlled by accurately calibrated capillary tube.

• Temperature Control: Easily accessible enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.

RATED FOR INDOOR USE ONLY

*Versatile cooler conguration

CONSTRUCTION

• Stainless Steel basin with integral drain

• Galvanized structural steel cooler chassis provides structural

integrity

• Stainless steel bottle ller wrapper with ABS plastic alcove

• Cooler cabinet available as Light Gray Granite Vinyl Clad Steel

or Stainless Steel (additional cost) construction

• Flexi-Guard® Safety Bubbler (option) utilizes an infused anti-microbial pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact.

• Vandal-resistantt bubbler (option) is one-piece heavy-duty

construction

Warranty: 5 year limited warranty on the unit’s refrigeration system. Electrical components and water system are warranted for 12 months from date of installation or 18 months from factory shipment, whichever date falls rst.

as shipped

*Versatile cooler conguration

alternate installation

CAPACITIES CHART

Model

EZSTL8WS(VR)*K 115V / 60Hz 8.0 GPH 5.0 370 89 lbs

EZSTL8WS(VR)*2K 220V / 50Hz 6.7 GPH 2.5 370 89 lbs

EZSTL8WS(VR)*3K 220V / 60Hz 8.0 GPH 2.5 370 89 lbs

EZSTLDDWS(VR)*K 115V/60 Hz

EZSTLDDWS(VR)*2K 220V/50Hz

EZSTLDDWS(VR)*3K 220V/60Hz

*Color code of (L) Light Gray Granite or (S) Stainless Steel cooler panels. **Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water. ++Complies; not third party certied.

In keeping with our policy of continuing product improvement, Elkay reserves the right to change specication without notice. Please visit elkay.com for the most current version.

Voltage /

Hertz

Chilling**

Capacity

–

F.L.

Amps

Rated Watts

1.0 15 63 lbs

0.5 15 63 lbs

2222 Camden Court Oak Brook, IL 60523

Approx.

Ship Wt.

630-572-3192

elkay.com

UL399

and CAN/

CSA 22.2

No. 120

Certied

ADA

COMPLIANT

ANSI/NSF

61 and 372

Certied

GreenSpec®

Listed

• • • •

++ • • •

• • • •

++ • • •

This specication describes an Elkay product with design, quality and functional benets to the user. When making a comparison of other producer’s offerings, be certain these features are not overlooked.

SPEC14-72 (04/2015)

EZH2O® Bottle Filling Station Versatile Bi-Level EZ Cooler Models EZSTL8WS & EZSTLDDWS

IMPORTANT! INSTALLER PLEASE NOTE:

These units are designed and built to provide water to the user which has not been altered by materials in the cooler waterway. The grounding of electrical equipment such as telephone, computers, etc. to water lines is a common procedure. This grounding may be in the building but may also occur away from the building. This grounding can cause electrical feedback into a water cooler creating an electrolysis which results in a metallic taste or an increase in the metal content of the water. This condition is avoidable by installing the cooler using the proper materials as shown.

Model shown with Flexi-Guard® bubbler.

ROUGH-IN FOR LEFT-HAND HIGH SIDE MODELS

17 7/8"

454mm

178mm

‰

18 3/8"

467mm

51 9/16"

1310mm

51mm

34 5/16" 872mm

(ALT. LOCATION)

24 1/2"

622mm

22 15/16"

583mm

9/32" Ø 7mm Ø HOLES 12

19 7/16" 494mm

6 3/8"

162mm

PREFERRED

LOCATION

‰

17 7/16"

443mm

6 3/8"

162mm

51mm

7/8"

22mm

(ALT. LOCATION)

13 15/16" 354mm

6 3/8"

162mm

3 7/8"

98mm

5 3/4"

146mm

178mm

FINISHED FLOOR

178mm

6 3/8"

162mm

PREFERRED

LOCATION

51mm

178mm

ROUGH-IN DIMENSIONS

NOTICE

This water cooler must be connected to the water supply using a dielectric coupling. The cooler is furnished with a non- metallic strainer which meets this requirement. The drain trap which is provided by the installer should also be plastic to completely isolate the cooler from the building plumbing system.

Bottle Filler unit will mount on bracket attached to wall by 6 holes (as shown). Water and electrical will connect through pre-punched hole in basin.

7/16" X 3/4" 11mm X 19mm OBROUND HOLES (6)

15"

381mm

2 7/8"

73mm

51mm

38 3/8"

975mm

ORIFICE HEIGHT

36 13/16"

936mm

RIM

HEIGHT

32 7/8"

835mm

ORIFICE HEIGHT

31 5/16" 796mm

RIM

HEIGHT

REQUIREMENT

27"

686mm

ADA

19"

483mm

21 7/8"

556mm

28 13/16" 732mm

RATED FOR INDOOR USE ONLY

19"

483mm

3 9/16" 90mm

HANGER BRACKET

8 1/16"

205mm

1 7/16" 37mm

12 1/2"

77mm

318mm

18 7/8"

479mm

REDUCE HEIGHT BY 3 INCHES FOR INSTALLATION OF CHILDRENS ADA COOLER

LEGEND: A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept 3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall. B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain. Drain stub 2” (51mm) out from wall. C = 1-1/2” Trap (not furnished). D = Electrical Supply (3) Wire Recessed Box Duplex Outlet. E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet

Job Name: ____________________________________ Model: _______________________ Qty. ____________ Contact: ______________________________________ Approval Signature: _____________________________ Notes:

louvers to wall. F = 7/16” (11mm) Bolt Holes for fastening to wall. NOTE: Installations Must Use Ground Fault Circuit Interrupter (GFCI).

Page 2

2222 Camden Court

Oak Brook, IL 60523

630-572-3192

Printed in U.S.A.

elkay.com

+ 1 hidden pages