Elektra Beckum WIG 200 DCi User Manual

Specifications and Main Features

Main Power Supply: 3 ~ 400 V
Supply Frequency: 50 - 60 Hz
Voltage: Open Circuit 90 V
For Welding Arc or TIG Welding: 5-200 A DC
Consumption Power (TIG): 5.3 kVA
Consumption Power (manual arc): 8.0 kVA
For TIG Welding: Working Voltage: 10.2-18 V AC/DC
For Manual Arc: Working Voltage: 20.2-28 V
For Manual Use: Maximum Current Draw: 12 A
Operating for TIG: Duty Cycle : 100%
Operating for manual arc: Duty Cycle : 80%
Power Supply: cos φ = 0.95
Designation: IP 23
Type of Cooling: Incorporates fans whilst operating (F)
Outfitted class: F
Mains Prepare A Requires: T16A
Celsius Operating With: -10 to 40
Celsius Storage With: -15 to 40
Dimensions (LxWxH): 500 x 245 x 285 mm
Weight: 21.5 kg

Frequently Asked Questions

Welding with WIG 200 DCi is done on metals only and not aluminium materials, is that true?

It is true for WIG 200 DCi and in fact it can weld all metals not just aluminium materials.

WIG 200 DCi Requirement of input to attach to varies1040?
A device of WIG 200 DCi requires a4700 volts 3-phase supply connection and use to attach.

Is it possible to weld aluminum using the WIG 200 DCi?

Unfortunately Alu welding is not what the WIG 200 DCi was originally designed for.

What Is the Maximum amperage WIG 200 Dci can produce?

For WIG 200 Dci the maximum amperage can go up to 200 A.

How to operate a WIG 200 Series?

This machine requires protective clothing, gloves and an appropriate welding helmet in order to to shield the operator from ultraviolet light and welding sparks.

What is the protocol for switching welding modes?

There is a mode selector switch on the machine which allows the user to easily change the welding mode.

What Methane can be used as a shielding gas for this device?

Methane with an argon percentage of 99.996% is effective as a shielding gas during Tig welding activities.

In the case of an overload condition what is the solution?

An overload condition will turn the machine off automatically if the allowed duty cycle is moved past the threshold, to indicate this the overload light will turn on.