Electro-voice RE-2PRO DATASHEET
When applications like rentals, on location broad-
casts, or other tough environments call for a wireless microphone
with a mix of REV and RE-2 features, the answer is RE-2PRO.
The advanced features of the REV transmitter platforms allow
more systems in one location, longer range, more microphone
head choices, and high quality materials like the cast magnesium
bodypack. The RE-2 PRO system offers professional wireless at a
price point between the REV and RE-2.
WTU-2
All of the great features of the REV-WT bodypack transmitter with RE-2 compatibility:
Rechargeable AA battery operation.•
Cast Magnesium Case•
5 or 50mW transmit power•
Guitar optimization•
Compatible with referee mute •
RSB-2 switch
On/Off switch programmable•
No “RF” turn on•
detachable antenna•
Consumer alert: Most users do not need a license to operate this wireless microphone system.
Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not
in excess of 50 milliwatts); and it has no protection from interference received from any other
PHTU-2
All of the great features of the RE-2 HTU2
handheld transmitter with the addition of
interchangeable RC2 heads. Five different EV
microphone elements are available:
NDY/M 767a and 967 dynamics•
PL80a Premium Dynamic Vocal mic•
RE410 and RE510 concert condenser •
microphones
RE-2PRO Receiver
The RE-2 receiver is a rack mountable metal chassis with detachable
antennas. All rack mount hardware and front mount antenna cables are
included with every unit.
device. Purchasers should also be aware that the FCC is currently evaluating use of wireless
microphone systems, and these rules are subject to change. For more information, call the FCC at
1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at
www.fcc.gov/cgb/wirelessmicrophones
RE-2PRO Receiver
Receiver Type Synthesized PLL
Frequency Range (RF) G Band 614 – 642 MHz (TV Channels 38–42)
A Band 648 – 676 MHz (TV Channels 43-48)
Number of Channels 1112 possible channels (25 kHz steps)
Modulation +/- 40 kHz Diversity Digital Posi-Phase™ True Diversity
RF Sensitivity < 1.0 uV for 12 dB SINAD
Squelch Tone Code plus Amplitude
FCC Certification Approved under Part 15
Power Requirements 12 V AC/DC 300 mA
Antennas Detachable 1/4 wave
Rack Mount Hardware and front mount cables included
Dimensions 1.72” H x 7.50” W x 5.9” D
43.69 cm H x 190.50 mm W x 15
Audio parameters
Frequency Response 50 – 15 kHz +/- 2 dB
Balanced Output (max @ 40 kHz deviation) Mic Position -10 dBV
Line Position/unbalanced
Adjustable
10 mV-2V RMS
Distortion <1.0%, 0.5% typical (ref 1 kHz, 40 kHz deviation)
Signal-to-Noise Ratio >100 dB A
PHTU2 Handheld
Radiated Output 30mW typical
N/D 767a Supercardioid N/DYM Dynamic
N/D 967 Supercardioid N/DYM Concert Dynamic
Microphone Elements
PL80a Supercardioid Premium Concert Dynamic
RE410 Cardioid Condenser
RE510 Supercardioid Condenser
Audio Gain Adjustment 26dB
Power Requirements 9 Volt Alkaline Battery
Battery Life (Typical) > 8 hours with alkaline
Antenna Internal 1/2 wave
Dimensions 9.9 in. long (252mm)
WTU-2 Bodypack
Radiated Output 5 mW or 50mW selectable
TA4F Connector Pin 1 – Ground, Pin 2 – Mic Input
Pin 3 - +5V DC Bias, Pin 4 - +5V through 3 kOhm
Audio Gain Adjustment 42dB
Power Requirements Two AA Batteries (Alkaline or NiMH rechargeable)
Battery Life (Typical) > 8 hours with alkaline
Antenna External 1/4”wave detachable
Case Material Cast Magnesium
Dimensions 3.37 in. H x 2.6 W x 0.75 D
85 mm H x 66 W x 19 D
Optional BH-200
©2010 Bosch Security Systems, Inc. LIT000474000
Loading...