Electrolux PDST60 Installation Guide

Pedestal with drawer

EN

Installation InstructionAccessories

2

Safety Information Product & Accessories

WARNING!

Information

Do not stack a dryer on top of washing
machine if using a pedestal.

WARNING! Do not install it alone.

Dimension

1000 mm

Accessories

(A)

(B)

(E)

1x

(F)

305 mm

(C)

2x

595 mm

535 mm

(D)

10x2x 2x 2x

WARNING! Before proceeding
with installation, make sure there
is enough room.

(A)

2 front metal brackets.

(B)

2 rear brackets for washing machine.

(C)

2 rear brackets for tumble dryer.

(D)

10 screws. (For tumble dryer
8 screws will be sufficient.)

(E)

1 spanner to adjust the levelling feet.

(F)

2 additional containers
(where included)

Installation Procedure

Remove the pedestal and all

1.

accessories form the box.

Make sure that the rear rubber

2.

feet are mounted.

Adjust the front adjustable feet to

3.

make the pedestal stable.

-

For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.

Screw the front brackets on the

6.

pedestal.

3

If you install the pedestal under a

4.

brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.

If the appliance is already

5.

connected:

-

Disconnect the mains plug from
the mains socket.

-

For washing machine. Close the
water tap .

-

For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.

For washing machine. Gently lay

7.

the washing machine on its
detergent dispenser side.

Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.