Electrolux EOG621W, EOG621B, EOG621K User Manual

Gas ovens
INSTRUCTION BOOKLET
Please read this instruction booklet before using the appliance
35674-3501
Mod. EOG 621
GB
Important Safety Information
Installation
This oven must be installed by qualified personnel to the
relevant British Standards.
Always use oven gloves to remove and replace food in the
oven.
This oven is heavy. Take care when moving it.
Remove all packaging, both inside and outside the oven,
before using the oven.
Do not attempt to modify the oven in any way.
The use of a gas cooking appliance results in the
production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).
Prolonged intensive use of the appliance may call for
additional ventilation, for example opening a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.
Child Safety
This oven is designed to be operated by adults. Do not
allow children to play near or with the oven.
The oven gets hot when it is in use. Children should be
kept away until it has cooled.
During Use
This oven is intended for domestic cooking only. It is not
designed for commercial or industrial purposes.
Do not block any of the oven vents. Never line any part
of the oven with aluminium foil.
Do not allow heatproof cooking material, e.g. roasting
bags, to come into contact with oven elements.
Ensure that all control knobs are in the OFF position
when not in use.
Do not leave cookware containing foodstuffs, e.g. fat or
oil in or on the oven in case it is inadvertently switched ON.
When using other electrical appliances, ensure the
cable does not come into contact with the hot surfaces of the oven.
Maintenance and Cleaning
Only clean this oven in accordance with the instructions.
The oven should be kept clean at all times. A build-up of
fats or other foodstuffs could result in a fire, especially in the grill pan.
Always allow the oven to cool down and switch off the
electrical supply before carrying out any cleaning or maintenance work.
Service
This oven should only be repaired or serviced by an
authorised Service Engineer and only genuine approved spare parts should be used.
Environmental Information
After installation, please dispose of the packaging with
due regard to safety and the environment.
When disposing of an old appliance, make it unusable,
by cutting off the cable. Remove any door catches, to prevent small children being trapped inside.
Never place plastic or any other material which may melt
in or on the oven.
Do not place sealed cans or aerosols inside the oven.
They may explode if they are heated.
Do not hang towels, dishcloths or clothes from the oven
or its handle.
Do not use this oven if it is in contact with water and never
operate it with wet hands.
Take great care when heating fats and oils as they will
ignite if they become too hot.
2
Keep this instruction book for future reference
and ensure it is passed on to any new owner.
Contents
For the User
Important Safety Information 2
Guide to Use the instructions 3
Description of the Appliance 4
Controls 4
Before the First Use 5
24 hour Clock and Timer 6
Using the Oven 8
Hints and Tips 8
Grilling with the turnspit 8
Gas Oven Cooking Charts 9
Cleaning the Oven 10
Something Not Working 11
Service and Spare Parts 12
Customer Care 12
Guarantee Conditions 13
For the Installer
Instructions for the Installer 14
Important Safety Requirements 14
Building in 15
Electrical Connection 16
Gas connection 17
Conversion from Natural to LPG Gas 18
Guide to Use the instructions
The following symbols will be found in the text to guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
F
Hints and Tips
Environmental information
This appliance complies with the following
E.E.C. Directives: * 73/23 - 90/683 (Low Voltage Directive); * 93/68 (General Directives); * 89/336 (Electromagnetical
Compatibility Directive) . and subsequent modifications
3
Description of the Appliance
2
3
7
56
4
1. Control panel
Controls
Oven Function Control Knob
1
8 9
10
2. Thermostat control knob
3. Gas stop Control Light
4. Oven function control knob
5. Thermostat control light
6. Mains on light
7. Electronic programmer
8. Grill
9. Oven lamp
10. Turnspit hole
Oven Light - The oven light will be on without any cooking function.
Grill - The heat comes from the top element only
Grill and Rotisserie - The turnspit can be used for either spit roasting meat or for
kebabs and smaller pieces of meat.
Bottom heating element - The heat comes from the bottom of the oven only
Gas oven operation
The oven cannot be switched on with the use of flames.
To switch on the oven:
F
- Turn the oven function control knob to (the oven lamp and the yellow light on the control panel will
come on)
- Turn the thermostat control knob to the required temperature (the red light on the control panel will come on).
- After 5 seconds, the oven will ignite. If the oven does not switch on, the gas stop control light on the control panel will come on.
To try to switch the oven again:
F
- turn the oven function and the thermostat control knobs to l (zero) and wait some seconds before trying to ignite the oven again.
FO 2478
When using the oven for the first time, it may be necessary to try the ignition several times: this is due to the air inside the gas pipes.
If there is a black out during the operation of the oven, this will automatically switch on as soon as power is restored.
Electric grill
- Turn the oven function control knob to and the thermostat control knob to MAX; To use the rotisserie and the electric grill:
F
- Turn the oven function control knob to and the thermostat control knob to 200°.
4
Thermostat Control Knob
Turn the thermostat control knob clockwise to select temperatures between 50°C and 250°C (MAX).
Mains on Light
The oven function control light will come on when the oven function control knob is set.
Thermostat Control Light
The thermostat control light will come on when the thermostat control knob is turned. The light will remain on until the correct temperature is reached. It will then cycle on and off to show the temperature is being maintained.
Gas stop Control Light
The gas stop control light will come on when the oven burner switches off. To switch on, turn the control knob to zero and wait some seconds, then ignite again.
Cooling fan
The cooling fan operates during cooking. Air is expelled through vents between the oven door and the control panel, as shown in the diagram.
The cooling fan may run on after the oven is switched off to keep the controls cool. This is quite normal.
50
MAX
100
200
150
FO 2482
The Safety Thermostat (Electric Grill)
This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequent over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Service Force Centre. Under no circumstances should you attempt to repair the appliance yourself.
Before the First Use
Remove all packaging, both inside and outside the oven, before using the appliance.
Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal.
1. Switch the gas oven function control
F
knob to and the thermostat control knob to maximum position.
2. Open a window for ventilation.
3. Allow the oven to run empty for approximately 45 minutes.
5
24 hour Clock and Timer
Minute minder
Cooking duration
End of cooking time
Manual function
Cookpot
symbol
A
A U
U T
T
O
O
Auto symbol
Cookpot symbol - This will be displayed when a program is in operation.
A
Auto symbol - This will be displayed when the
U
oven has been programmed for automatic
T
operation.
O
- + Time setting knob
The electronic timer can indicate the time of day, opera­te as a minute minder and automatically operate the oven. Before the oven can be operated, the time of day must be set on the electronic timer. Please note that this is a 24 hour clock. For example, 2pm is shown as 14:00.
In case of loss of power, all the settings (time of day, set program or program in operation), will be cancelled. When the power is restored, the numbers on the display will flash, and the timer has to be reset.
Programming
controls
- +
Time setting
TO SET THE TIME OF DAY
F
Press buttons and , and at the same time turn
the time setting knob until the correct time of day is displayed.
TO SET THE MINUTE MINDER
F
Press button and at the same time turn the setting
time knob until the duration time is displayed (maximum 23 hours, 59 minutes). Our diagram shows the timer set for 35 minutes. After a few seconds the time of day will show in the display. To check the number of minutes remaining, press the
button. At the end of the timed period an alarm will
sound. To switch off the alarm press button .
- +
- +
6
MANUAL FUNCTION
F
Press button to set the oven for manual function.
TO SET THE TIMER TO
F
SWITCH OFF ONLY
This is useful if you want to begin cooking immediately but have the oven switch off automatically.
1. Set the oven function control knob and the thermostat control knob on the required settings.
2. Place food in the oven.
3. Press button and, at the same time, turn the time setting knob until the required cooking duration
is displayed.
Our diagram shows the timer set for 1 hour 10 minutes. At the end of the cooking time the oven will switch off, an alarm will sound. Turn the oven function and thermostat control knob to zero. To switch off the alarm press button
.
TO SET THE TIMER TO SWITCH
F
THE OVEN ON AND OFF
- +
A
A U
U T
T O
O
- +
1. Ensure the clock is showing the right time of day.
2. Carry out steps 1, 2 and 3 as explained in "To set the timer to switch off only".
3. Press button and at the same time turn the time setting knob until the end cooking time is displayed.
Our diagram shows the end cooking time set for 7:35 pm.
At the end of the cooking time the oven will switch off, an alarm will sound. Turn the oven function and thermostat control knob to zero. To switch off the alarm
press button .
TO CANCEL A PROGRAMME
F
1. Press button and, at the same time, turn the time setting knob until the cooking duration is set on
"zero".
2. If the end cooking time has been set too, press button
and at the same time turn the time setting knob
until the end cooking time is set on "zero".
A
A U
U T
T O
O
- +
7
Loading...
+ 14 hidden pages