Electrolux EBE3400, EBE3700, EBB2800, EBB3700, EBB3400 User Manual

0 (0)
Electrolux EBE3400, EBE3700, EBB2800, EBB3700, EBB3400 User Manual

User manual

Frost free refrigerator

EBB2800

EBE3400

 

 

EBB3400

EBE3700

 

 

EBB3700

 

 

 

 

 

2

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.

Welcome to Electrolux.

BEFORE USING YOUR APPLIANCE

Check for any damage or marks. If you find the appliance damaged or marked you must report it within 7 days to claim for damages under the manufacturer’s warranty.

Before you use the appliance, we recommend that you read through the whole user manual which provides the description of the product and its functions. To avoid the risks that are always present when you use a gas appliance, it is important that the product is installed

correctly and that you read the safety instructions carefully to avoid misuse and hazards.

For future reference, please store this booklet in a safe place.

CONDITIONS OF USE

This appliance is designed and intended to be used in normal domestic applications only.

BEFORE YOU CALL

Please ensure you read the instruction manual fully before you call for service, or a full service fee could be applicable.

RECORD MODEL AND SERIAL

NUMBER HERE:

Model:

Serial No:

CONTENTS

3Important safety information

4General warnings

5Installation

5 Initial start up

5 Cleaning

6-7 Components

8Temperature control

9Door alarm

9Light bulb change

10Features

10 Door storage bins

10Crisper bin

Storing vegetables

Storing fruits and small items

10NutriLight

11Quick freeze function

11 Deodoriser

11Multi-flow air delivery with side cooling

11Slide-away glass shelf

12Troubleshooting

13-14 Notes

15 Warranty

SYMBOLS

The symbols you see in this manual have the following meanings:

WARNING!

This symbol indicates information concerning your personal safety.

CAUTION!

This symbol indicates information on how to avoid damaging the appliance.

IMPORTANT!

This symbol indicates tips and information about use of the appliance.

ENVIRONMENT!

This symbol indicates tips and information about economical and ecological use of the appliance.

IMPORTANT SAFETY INSTRUCTIONS

Please read the user manual carefully and store in a handy place for later reference. Pass the user manual on to new owners of the refrigerator.

TIPS AND INFORMATION

Important – check for any damages or marks

If you find the refrigerator is damaged or marked, you must report it within 7 days if you wish to claim for damage/ marks under the manufacturers warranty. This does not affect your statutory rights.

ENVIRONMENT!

Information on disposal for users

Most of the packing materials are recyclable. Please dispose of those materials through your local recycling depot or by placing them in appropriate collection containers.

If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

WARNING!

When you dispose of your old refrigerators and freezers, remove any doors. Children can suffocate if they get trapped inside.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Do not use a steam cleaner. If live components come into contact with condensing steam, they may short-circuit or cause an electric shock.

Do not use mechanical devices or other means to accelerate the defrosting process other than those recommended by the manufacturer.

This appliance contains insulation formed with flammable blowing gases. Avoid safety hazards by carefully disposing of this appliance.

If pressurised aerosol containers bear the word ‘flammable’ and/or a small flame

symbol, do not store them inside any refrigerator or freezer. If you do so you may cause an explosion.

3

R600a refrigerant warning

This appliance contains flammable R600a refrigerant. Avoid safety hazards by carefully installing, handling, servicing and disposing of this appliance. If your appliance contains R600a it will be indicated on the rating plate inside the appliance.

Ensure that the tubing of the refrigerant circuit is not damaged during transportation and installation.

In the event any damage accidentally occurs, keep the appliance away from open fires and any devices that produce sparks or arcs and luminaries during normal or abnormal operation, and unplug the appliance at the power point. Call authorised service for necessary action and advice.

Leaking refrigerant may ignite vent area if leak occurs.

The room for installing appliance must be at least 1m3 per 8g of refrigerant. The amount and type of refrigerant in the appliance can be found on the rating plate inside the appliance.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

WARNING!

It is hazardous for anyone other than an authorised service person to service this appliance. In Queensland the authorised service person MUST hold a gas work authorisation for hydrocarbon refrigerants to carry out servicing or repairs which involve the removal of covers.

WARNING!

Stable Footing

When your refrigerator is in place, you need to stabilise it. Lift the front of the refrigerator to take the weight off each stability foot and make small quarter turns to each foot until it is in firm contact with the floor. If you intend to move the refrigerator, remember to wind up each foot so

that you can move it freely. Repeat the process of the foot adjustment once you have settled on the new location of the refrigerator.

Side View

Stabilising foot wound down

4

GENERAL WARNINGS

Read the following carefully to avoid damage or injury.

This symbol indicates never to do this This symbol indicates always do this

It is important to use your refrigerator safely. Check these safety points before using your refrigerator.

The appliance must be plugged into its own dedicated 220-240V, 50Hz AC electrical outlet.

The plug must be accessible when the refrigerator is in position.

It is essential the powerpoint is properly earthed to ground. Consult a qualified electrician if you

are unsure.

Don’t use extension cords or adapter plugs with this refrigerator.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Unplug the appliance before cleaning and before changing the light bulb (when fitted) to avoid electric shock.

Never unplug the refrigerator by pulling the electrical cord as this may damage it. Grip the plug firmly and pull straight out.

Choose a location for your refrigerator that isn’t too cold. The ambient room temperature should be above 10°C.

Stand your refrigerator in a dry place – avoid areas of high moisture or humidity.

Don’t put the refrigerator in frosty or unprotected areas like a garage or on the verandah.

Don’t plug your refrigerator into a timer fitted to the powerpoint.

Do not put the refrigerator in direct sunlight, near stoves, fires or heaters.

Do not put the refrigerator on an uneven surface.

Do not store flammable materials on or under the appliance, e.g. aerosols.

Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

Never store fizzy drinks in the freezer compartment.

Never try to repair the refrigerator yourself, only use a qualified or authorised service person for repairs.

Never use electric heaters or dryers to defrost the freezer because you can receive an electric shock.

When transporting and installing the refrigerator, care should be taken to ensure that no parts of the refrigerating circuit are damaged.

Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.

When installed correctly, your refrigerator should:

Have adequate space at the back and sides for air circulation (refer to page 5).

Be vertically aligned to the surrounding cupboards.

Have doors that will self-close from a partially open position.

NOTE: You must read these warnings carefully before installing or using the refrigerator. If you need assistance, contact your Customer Care Department. The manufacturer will not accept liability, should these

instructions or any other safety instructions incorporated in this book be ignored.

INSTALLING YOUR NEW APPLIANCE

Clean the refrigerator thoroughly according to instructions and wipe away any dust that has accumulated

during shipping.

Check that the floor is level. If it is not, adjust the stabilising foot so that the refrigerator is level and stable.

We recommend that the refrigerator be turned on and left to run for two to three hours before placing any food inside it. This will allow you to check that it is operating properly and there is adequate cool air in the freezer.

Installation clearances

Allow a minimum of 30mm clearance on both sides of the refrigerator.

Allow a minimum of 50mm clearance at the back of the refrigerator.

Allow a minimum of 50mm (X) clearance above the refrigerator.

If you do not have a cupboard above the fridge with a rear gap of minimum 100mm (Y), recommended clearance at the top of the refrigerator increases from 50mm to 90mm (x)

When positioned in a corner, the clearance must be at least 300mm on the hinge side to allow the door to open smoothly so that bins and shelves can

be removed easily. For easy removal of Crisper it is recommended to remove bottle door bin first if

minimum clearance in the corner on hinge side is less than 350mm.

30mm

50mm

30mm

 

 

300mm

airspace

X

Y

 

Recommended

 

 

 

 

 

CABINET

 

 

 

 

 

DOOR

 

 

 

 

NOTE: Refrigerator doors on all models are designed

to sit proud of cabinetry (not flush). The refrigerator should be placed against a wall of cabinetry and the clearance between the rear of the refrigerator and the wall should not be greater than 75mm.

Initial start up

Refrigerators work by transferring heat from the food inside to the outside air. This operation makes the back and sides of the refrigerator feel warm or even hot particularly at start-up and on warm days.

Your refrigeration uses energy efficient components that may produce differnet noises compared to older refrigerators. Please see troubleshooting guide for more information.

A light frosting will occasionally occur on the cold interior of the freezer if the door is opened frequently. This is normal and the frost will disappear after a few days in

most climates.

5

Operating tips

Avoid placing food against air outlets as this will impede air circulation.

Make sure that the freezer and fresh food doors are fully closed after you have loaded or removed food from these compartments. If the doors are left partly opened, a heavy frost will coat the inside of the freezer. If this occurs, remove the frost. Ensure that all doors are properly closed to prevent frost from reappearing.

Cleaning

Exterior

Clean the refrigerator with only lukewarm soapy water and a soft cloth. Rinse with clean water and then wipe the

surface with a soft clean cloth to remove any soap residue. Interior

Clean the refrigerator interior regularly. Turn power off. Wipe the interior with a soft cloth and lukewarm soapy water. Thoroughly dry all surfaces and removable parts. Avoid getting water on the refrigerator controls. If you have taken out any removable parts, replace them and switch on the power before re-stocking the refrigerator. Wipe away thoroughly any food spills.

Keep door seals clean

Ensure that the door seals are always clean. Sticky food and drinks can cause seals to adhere to the cabinet and may cause the seals to tear when opening the door.

Wash seals with lukewarm soapy water. Rinse thoroughly and dry.

CAUTION!

Never use hot water, solvents, commercial kitchen cleaners, aerosol cleaners, metal polishers, caustic or abrasive cleaners or scourers to clean the appliance as they will damage it. Many commercially available cleaning products and detergents contain solvents that will damage your refrigerator. When cleaning, use only a soft cloth and lukewarm soapy water.

WARNING!

EBE models are fitted with Long life LED lighting. In the unlikely event the LED lights should ever fail,

Then they should be serviced by the manufacture, it’s service agent or similar qualified person. Refer page 15 for contact details.

Loading...
+ 11 hidden pages