Electrolux E39WD75GTT User Manual
Warmer Drawer
E30WD75GTT panel ready
Panel Ready
Match any decor with this Panel-Ready
Warmer Drawer, designed to accept customized
cabinetry drawer front panel and handle
(not included)
.
Designed for the well-lived home.
30" PANEL-READY* WARMER DRAWER
Capacity
FEATURES
Electronic Controls
Blue LED Display
Automatic Shutoff – 4 Hour
Humidity Control
Heating Element (Watts)
Smooth-Glide™ Full-Extension Drawer
Stainless Steel Drawer Interior
Second-Tier Rack
ACCESSORIES
ServeWare – 5304447729
SPECIFICATIONS
Drawer Interior Dimensions –
Height
Width
Depth
Overall Exterior Dimensions –
Height
Width
Depth (to Front Drawer CornerExcluding Custom Panel)
(Fully Extended Excluding Custom Paneland Handle)
Temperature Range
Power Supply Connection Location
Voltage Rating
Connected Load (kW Rating) @120 Volts
Amps@ 120 Volts
Minimum Circuit Required (Amps)
60" Electrical Cable
Approved for Under-Counter Installation
Product Weight
Shipping Weight (Approx.)
* Handle not included with panel-ready model.
‡ For use on adequately wired 120V, dedicated circuit having 2-wire service with
a separate ground wire. Appliance must be grounded for safe operation.
NOTE: Always consult local and/ or national electric codes. Refer to Product Installation
Guide for detailed installation instructions on the web at electroluxicon.com.
Specifications subject to change.
‡
1.6 Cu. Ft.
Yes
Yes
Yes
Yes
450
Yes
Yes
Yes
Optional
6-1/2"
20-15/16"
19-1/4"
10-3/4"
29"
23-3/8"
41-1/2"
80°F – 210° F
Right Center Rear
120V/ 60Hz /15A
0.45
3.75
15
Included
Yes
41 Lbs.
52 Lbs.
Smooth-Glide™Full-Extension
Warmer Drawer
Drawer slides in and out with ease, extending
completely and safely for convenient access to
prepared foods.
Flexible Temperature Control
The 450-watt heating element keeps food warm
at a preferred serving temperature of anywhere
from 80 to 210 degrees F.
Stainless Steel Interior Design
Entire inner drawer cavity is constructed of
smooth and durable, seamless stainless steel
for easy cleanup.
electroluxicon.com
Warmer Drawer
Full plywood
base required to
support 100 lbs.
41/2" min.
required
distance
to floor
9
7
/8" min.
10
1
/4"max.
281/2" min.
28
3
/4" max.
23
5
/8"min.
24"max.
9 7/8" min.
10
1
/4"max.
1
1
/
2
"
min.
*Critical dimension –
MUST be applied
**Electrical junction
box for Wall Oven
must be lower than
the Warmer Drawer
cutout
†
Maximum height
depends on critical
dimension (
11
5
/
8
")
3"
max.**
30"min.
4" x 4"
opening
to route
armoured
cable
281/2"
min.
28
7
/8"
max.
Electrical
junction box
location
281/2"min.
28
3
/4"max.
Bottom
of oven
cutout
115/8"
min.*
24"*
(critical
dimension)
Two 3" wide
x
3
/4" thick
planks must
be installed,
capable of
supporting
200 lbs.
1
3
/
4
"
min.
†
E30WD75GTT panel ready
Note: Refer to web for detailed custom
panel construction and installation instructions.
23 3/8" (not including
custom panel)
Mounting
panel
29"
Overall depth with
drawer fully extended
(excluding custom panel
and handle) – 411/2"
10 3/4"
Panel-Ready
Warmer Drawer
Stand-Alone
Installation
Power cord
location (right
center rear)
7
/8"
Panel Specifications
Height Width Thickness
1
/4" 30"1/2"min.
11
30" Panel-Ready Warmer Drawer Specifications
•
Product Weight – 41 Lbs.
•
Voltage Rating –120V / 450W/60 Hz / 15 Amps
•
Connected Load (kW Rating) @120 Volts = 0.45kW (For use on
adequately wired 120V, dedicated circuit having 2-wire service with a
separate ground wire. Appliance must be grounded for safe operation.)
•
Amps @120V = 3.75 Amps
•
Full plywood base required, capable of supporting 100 Lbs.
•
Base must be level and cabinet front must be square.
•
Warmer Drawer can be used alone, or is approved to be used in
combination with any Electrolux ICON™Wall Oven. (Refer to Combination
Installation Specifications and drawing on this page.)
Custom
Custom
panel
Mounting
panel
•
Warmer Drawer can be used alone, or is approved to be used in
combination with any Electrolux ICON™built-in product. (Refer to
Combination Installation Specifications pages on web.)
Custom Panel Specifications
•
Handle not included, match to custom cabinetry.
•
Panel Dimensions – 11-1/4"H x 30"W x 1/2" min. D
•
Refer to web for detailed custom panel construction and installation
instructions.
Optional Accessories
•
ServeWare – (5304447729).
Warmer Drawer/Single Wall Oven
Combination Installation
Warmer Drawer/ Wall Oven Combination Specifications
•
To support Wall Oven when using in combination with Warmer Drawer,
two 3"-wide x 3/4" thick planks must be installed as a base, capable of
supporting 200 Lbs. Do NOT use full base, since planks are necessary
USA
CANADA
E30WD75GTT 03/08 © 2008 Electrolux Home Products, Inc. Printed in the U.S.A.
to allow for proper air displacement.
•
250 Bobby Jones Expressway •Augusta, GA 30907 •1-877-4electrolux (1-877-435-3287)
•
5855 Terry Fox Way •Mississauga, ON L5V 3E4 •1-800-265-8352
Custom front panel
with custom handle
(not included)
•
electroluxicon.ca
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
•
electroluxicon.com
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Loading...