|
|
ITEM # _______________________________________________ |
||
|
|
MODEL # _____________________________________________ |
||
|
Modular Cooking Range Line |
PROJECT NAME # ______________________________________ |
||
|
|
|
||
S90 Full Surface Two Zone Induction |
SIS # _________________________________________________ |
|||
|
|
|||
|
Range on Open Base, C-Board |
AIA # _________________________________________________ |
||
|
|
|
|
|
|
|
|
|
|
|
|
Main features |
||
|
|
|||
|
|
• Glass ceramic cooking surface with 2 independently controlled induction |
||
|
|
zones with a power of 5 kW per zone. |
||
|
|
• The large surface induction top offers a substantial increase in pan or pot |
||
|
|
capacity with a seamless transition between individual heating zones, ideal |
||
|
|
for à la carte operation. |
||
|
|
• Each cooking zone is composed of one induction coil. |
||
|
|
• Almost the entire surface of the ceramic plate can be used without “dead” |
||
|
|
spots. |
||
|
|
• On indicating lamp for each zone located on control console. |
||
|
|
• Fast deployment with full heating power immediately. |
||
|
|
• Low heat dissipation to the kitchen. |
||
|
|
• Power to the individual zones can be set with progressive output i.e. fine |
||
|
|
regulation at the lower and larger progress at the upper levels. |
||
|
|
• The smooth, glass ceramic plate is not directly heated, so there is no |
||
|
|
burning on cooking surface. |
||
|
|
• Heavy duty internal frame 304 type Stainless steel with reinforcement on |
||
|
|
top of 0.157″ (4 mm). |
||
|
|
• 0.118″ (3 mm) top in 305 type Stainless steel. |
||
|
|
• “Lasertec connection system” creates seamless work top when units are |
||
Modular Cooking Range Line |
connected to each other. |
|||
• Raised rear C-Board permits unit to be connected up against the wall for |
||||
S90 Full Surface Two Zone Induction |
||||
better hygiene. |
||||
Range on Open Base, C-Board |
||||
• Unit delivered with four 7-7/8″ (200 mm) legs as standard (all round |
||||
|
|
|||
584126 |
Full surface two zone induction range 19-11/16″, |
stainless steel kick plates as option). |
||
|
open base, C-Board, wall or back to back |
Optional Accessories |
||
|
installation – 208 V |
|||
|
• Set 4 Castors (2 with brake) |
|||
584127 |
Full surface two zone induction range 19-11/16″, |
|||
|
|
|||
|
open base, C-Board, wall or back to back |
• Left side Stainless steel 0.118″ (3 mm) panel |
||
|
installation – 240 V |
• Right side Stainless steel 0.118″ (3 mm) panel |
||
|
|
• 5″ (130 mm) Portioning Shelf |
||
|
|
|||
Short Form Specification |
• 7.8″ (200 mm) Portioning Shelf |
|||
• All round Stainless steel kick plates. |
||||
|
|
|||
|
|
• Shelf for open base |
||
Item No. ___________________________________ |
||||
• Shelf fixation kit for open base |
||||
|
|
|||
Unit to be Electrolux S90 Full Surface Two Zone Induction Range |
• Scraper for induction ranges. |
|||
on open base. Electric characteristics to be ___ 208 V or ___ 240 V |
||||
|
|
|||
three phase. Unit to have glass ceramic cooking surface with 2 in- |
|
|
||
dependently controlled 5 kW induction zones. Unit to feature large |
|
|
||
surface induction top with seamless transition between individual |
|
|
||
heating zones. Unit to have raised rear c-board for against the wall |
|
|
||
or back to back unit installation. Body and open base of unit entirely |
|
|
||
in 304 Stainless steel. Unit shall have heavy duty 304 Stainless |
|
|
||
steel internal frame with reinforcement on the top of 0.157″ (4 mm). |
|
|
||
Extra strength work top in heavy duty 0.118″ (3 mm) Stainless steel. |
|
|
||
“Lasertec” connection system permits units to be connected to each |
|
|
||
other creating a seamless work top. |
|
|
||
Covered by Electrolux Platinum Star™ Service Program two-year |
|
|
||
parts and one-year labor warranty, installation start-up and perfor- |
|
|
||
mance check-up after one year from installation. |
|
|
||
|
|
|
|
Approval: ___________________________________________
Electrolux Professional, Inc. www.electroluxusa.com/professional
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
<![if ! IE]> <![endif]>on Range Induction Zone Two Surface Full S90 |
<![if ! IE]> <![endif]>Modular |
<![if ! IE]> <![endif]>Board-C Base, Open |
<![if ! IE]> <![endif]>Line Range Cooking |
|
|
Modular Cooking Range Line
S90 Full Surface Two Zone Induction
Range on Open Base, C-Board
Front View
Top View
Electric
Supply voltage: |
|
584126 |
208 V/3p/60Hz - 27.8A |
584127 |
240 V/3p/60Hz - 24.1A |
Total Watts: |
10 kW |
Key Information
Induction Top Dimensions |
|
(width): |
13-3/8″ (340 mm) |
Induction Top Dimensions |
|
(depth): |
29.13″ (740 mm) |
Storage Cavity Dimensions |
|
(width): |
13-3/8″ (340 mm) |
Storage Cavity Dimensions |
|
(height): |
14-1/16″ (358 mm) |
Storage Cavity Dimensions |
|
(depth): |
29-1/16″ (738 mm) |
Net weight: |
220 lb (100 kg) |
Shipping weight: |
265 lb (120 kg) |
Shipping width: |
27-9/16″ (700 mm) |
Shipping height: |
43-5/16″ (1100 mm) |
Shipping depth: |
43-5/16″ (1100 mm) |
Shipping volume: |
30.01 cu.ft (0.85 m³ ) |
If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap off approximately 6″ (150 mm) should be maintained or some form of heat insulation fitted.
Induction compatible pots & pans must be used.
Side View
Modular Cooking Range Line
S90 Full Surface Two Zone Induction Range on Open Base, C-Board
The company reserves the right to make modifications to the products without proir notice. All information correct at time of printing.
5-14-06