Edgestar IWR280SZ User Manual

Fully Integrated Wine Refrigerator
IWR280SZ
Owner’s Manual
For more information on other great EdgeStar products on the web, go to http://www.edgestar.com
Important Safety Information
Improper handling can cause serious damage to the EdgeStar wine cooler and/or injury to the user. This wine cooler is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet.
Please read and follow the safety information listed below to reduce the risk of fire, electric shock or injury.
Electrical Safety
Do not exceed the power outlet ratings. It is recommended the wine refrigerator be
connected on its own circuit.
The unit must be installed in accordance with
state and local electrical codes.
A standard electrical supply (115 V, 60Hz), that is
properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.
Use outlets that cannot be turned off by a switch
or pull chain.
Always turn the unit off and unplug it from the
outlet when cleaning.
Unplug the unit if it is not going to be used for an
extended period of time.
Do not operate the unit with a power plug missing
the ground plug, a damaged cord or a loose socket.
Be sure the wine refrigerator is properly
grounded.
Never plug or unplug the unit with wet hands. Do not bypass, cut or remove the grounding plug. Do not use extension cords or power strips with
this unit. You may need to contact your electrician if it is necessary to use a longer cord or if you do not have a grounded outlet. Do not modify the power cord’s length or share the outlet with other appliances.
Do not start or stop the unit by switching the
circuit’s power on and off.
If the power cord is damaged, it must be replaced
by the manufacturer or a qualified technician.
Never repair the unit while it is plugged in. Immediately unplug the unit if it makes strange
sounds, emits smells or smoke comes out of it, and contact customer service.
Do not remove any part of the casing unless
instructed by an authorized technician.
You should never attempt to repair the unit
yourself.
Contact customer service for service options if the
unit needs service.
General Safety
To prevent back and other types of injuries, use at
least two people to move and install the wine cooler.
This appliance is not intended for use by persons,
including children, with reduced physical, sensory or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
Install the wine refrigerator in a well-ventilated area
where the ambient temperature is above 50°F and below 90°F.
The temperature range for this cooler is optimized
for wine and beverage storage. Perishable food items may require a different storage environment.
Do not place hot or warm items into the cooler
before they cool down to room temperature.
This unit is designed to be installed indoors, and
protected from rain, sleet, snow, and/or moisture.
This unit is not intended to be used by children. Children should be supervised to ensure that they
do not play with this product.
Never allow children to crawl inside the wine
refrigerator. If disposing the unit, remove the door.
Do not use this appliance near flammable gas or
combustibles, such as gasoline, benzene, thinner, etc.
Do not place the unit near heat sources such as
ovens, grills, or direct sunlight.
Only use in an upright position on a flat, level
surface and provide proper ventilation.
Do not pinch or kink the power supply line between
the unit and cabinet.
Do not leave any cleaning solutions in the unit Do not use solvent-based cleaning agents or
abrasive solutions to clean the unit as they may damage the interior and exterior.
Do not place any other appliances on top of the unit. Do not turn the unit upside down, on its side, or at
an angle off level.
If your model wine cooler is equipped with a lock,
take care to keep the keys away from children.
Do not move the unit without emptying the contents
and securing the door in a closed position.
i
Important Safety Information (Continued)
R600a
This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a), which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it contribute to greenhouse gases. Care must be taken during transportation and set up of the appliance. Make sure to check that no parts of the cooling system are damaged. Leaking coolant can ignite and may cause personal injury. In the event of any damage:
Avoid open flames and anything that may create a spark.  Disconnect from the main power supply.  Vent the room in which the appliance is located for several minutes.  Contact the EdgeStar Customer Service Department for advice.  The more coolant there is in an appliance, the larger the room it should be installed in. In the
event of a leak, if the appliance is in a small room, there is the danger of combustible gases building up. For every ounce of coolant at least 325 cubic feet of room space is required. The amount of coolant in the appliance is stated on the rating label in the lower left side of the inner cabinet of the appliance. It is hazardous for anyone other than an Authorized Service Person to carry out servicing or repairs to this appliance.
Take serious care when handling, moving and using the appliance to avoid eithe r damaging
the refrigerant tubing, or increasing the risk of a leak.
Replacing component parts and servicing must be done by manufacturer auth orized service
personnel, so as to minimize the risk of possible ignition due to incorrect parts or improper service.
Risk of child entrapment!
Before discarding your old appliance:
Take off the door(s).  Leave the shelves in place so that children cannot easily crawl into the unit.
- SAVE THESE INSTRUCTIONS -
EdgeStar Wine Refrigerator ii
Table of Contents
IMPORTANT SAFETY INFORMATION ................................................................. I
IMPORTANT SAFETY INFORMATION (CONTINUED) ....................................... II
INTRODUCTION ................................................................................................... 1
PARTS IDENTIFICATION ..................................................................................... 2
FRONT VIEW ........................................................................................................ 2
INSTALLING THE WINE COOLER ............................................................................. 2
UNPACKING THE WINE COOLER ............................................................................ 2
FULLY INTEGRATED BUILT-IN INSTALLATION ............................................... 3
ELECTRICAL REQUIREMENTS .......................................................................... 4
RECOMMENDED GROUNDING METHOD ................................................................... 4
LEVELING THE WINE COOLER ............................................................................... 4
INSTALLING THE DOOR HANDLE ............................................................................ 5
INSTALLING AND REMOVING THE SHELVES ............................................................ 5
REVERSING THE DOOR SWING .............................................................................. 6
OPERATION .......................................................................................................... 7
INSTALLATION CHECK LIST BEFORE OPERATION .................................................... 7
USING THE TEMPERATURE CONTROL PANEL ......................................................... 7
TEMPERATURE ALARM ......................................................................................... 8
DOOR ALARM ...................................................................................................... 8
INTERIOR LIGHT ................................................................................................... 8
DYNAMIC CLIMATE / SILENT MODE ........................................................................ 8
SABBATH MODE ................................................................................................... 9
NORMAL SOUNDS ................................................................................................ 9
DEFROSTING ....................................................................................................... 9
PREPARING THE WINE COOLER FOR STORAGE .................................................... 10
iii
CLEANING AND MAINTENANCE ...................................................................... 11
EXTERIOR CLEANING ......................................................................................... 11
INTERIOR CLEANING ........................................................................................... 11
TROUBLESHOOTING ........................................................................................ 11
TROUBLESHOOTING CONTINUED ......................................................................... 12
SPECIFICATIONS ............................................................................................... 13
First Time Operating Instructions Before use, make sure all packaging labels and materials are all removed
from the unit. Be sure to keep track of all included parts and pieces before discarding packaging materials. It is advised that you keep the original box and packaging materials in case you are ever to move or ship the appliance in the future.
Let the unit stand for at least 24 hours before you use it; this allows the cooling components time to settle from transit. The instruction manual should be read before use.
This owner’s manual is provided for reference use only. Specifications may change without prior notice. Refer to the product label on the back of your wine cooler for the latest technical information.
Introduction
Thank you for purchasing this EdgeStar wine cooler. We are glad you chose us. We believe that your purchase of this product opens a relationship between you and EdgeStar. We will provide the customer support needed to nurture that relationship.
This manual contains important information regarding the proper installation, use and maintenance of your wine cooler. Following this manual will ensure that your product will work at its peak performance and efficiency.
Please save the original product packaging in case you need to safely transport your wine cooler.
For Your Records:
Please write down the model number and serial number below for future reference. Both numbers are located on the ratings label on the back of your unit and are needed to obtain warranty service. You may also want to staple your receipt to this manual as it is the proof of your purchase, and is also needed for service under your warranty.
Model Number: Serial Number: Date of Purchase:
To better serve you, please do the following before contacting customer service:
If you received a damaged product, immediately contact the
retailer or dealer that sold you the product.
Read and follow this instruction manual carefully to help you
install, use and maintain your wine cooler.
Read the troubleshooting section of this manual as it will help you
diagnose and solve common issues.
Visit us on the web at http://www.edgestar.com to register your
product, download product guides, additional troubleshooting resources and up-to-date information.
If you need warranty service, our friendly customer service
representatives are available via email at service@edgestar.com or by telephone at 1 (866) 319-5473.
1
Front View
Handle
Tip: Gather the model and serial number from the product label and write them down before installing the wine refrigerator.
Parts Identification
Control Panel
Shelf
Installing the Wine Cooler
The wine cooler should be installed in accordance with local electrical code requirements. The wine cooler should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty.
Before you plug the wine cooler into a power supply, be sure to let it stand upright for at least 24 hours to allow the compressor’s oils to settle.
Unpacking the Wine Cooler
WARNING: Use two or more people to move and install the wine cooler. Failure to do so can result in back or other injury. Carefully remove the packaging materials. Remove any shipping tape and glue from your wine cooler before using. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your wine cooler.
IMPORTANT:
Do not remove any safety, warning, or product information labels
from your wine cooler.
Do not touch the power plug when your hands are wet. Never unplug the unit by pulling on the plug.
EdgeStar Wine Refrigerator 2
Loading...
+ 13 hidden pages