Edgestar BR7000SSOD Owner’s Manual
Built-In Outdoor Kegerator
!
BR7000SSOD
Fridge for the KC7OOOSSOD Kegerator
Owner's Manual
For more information on other great EdgeStar products on the web, go to http://www, edgestar.com
Important Safety Information
Improper handling can cause serious damage to the EdgeStar kegerator and/or injury to the user. This kegerator is
designed for domestic use only. Do not use the unit for industrial or commercial use. Any other use may invalidate
the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other technical data
related to this unit. The unit must be used in a properly grounded wall outlet.
Please read and follow the safety information listed below to reduce the risk of fire, electric shock or injury.
A A
Electrical Safety
• Do not exceed the power outlet ratings.
• It is recommended the kegerator be connected on
its own circuit.
• The unit must be installed in accordance with
state and local electrical codes.
• A standard electrical supply (115 V, 60Hz), that is
properly grounded in accordance with the
National Electrical Code and local codes and
ordinances is required.
• Use outlets that cannot be turned off by a switch
or pull chain.
• Always turn the unit off and unplug it from the
outlet when cleaning.
• Unplug the unit if it is not going to be used for an
extended period of time.
• Do not operate the unit with a power plug missing
the ground plug, a damaged cord or a loose
socket.
• Be sure the kegerator is properly grounded.
• Never plug or unplug the unit with wet hands.
• Do not bypass, cut or remove the grounding plug.
• Do not use extension cords or power strips with
this unit. You may need to contact your electrician
if it is necessary to use a longer cord or if you do
not have a grounded outlet. Do not modify the
power cord's length or share the outlet with other
appliances.
• Do not start or stop the unit by switching the
circuit's power on and off.
• If the power cord is damaged, it must be replaced
by the manufacturer or a qualified technician.
• Never repair the unit while it is plugged in.
• Immediately unplug the unit if it makes strange
sounds, emits smells or smoke comes out of it,
and contact customer service.
• Do not remove any part of the casing unless
instructed by an authorized technician.
• You should never attempt to repair the unit
yourself.
• Contact customer service for service options if the
unit needs service.
General Safety
• To prevent back and other types of injuries, use at
least two people to move and install the kegerator.
• This unit is not intended for use by persons,
including children, with reduced physical, sensory or
mental capabilities, unless they have been given
supervision or instruction concerning the use of the
appliance by the person(s) responsible for their
safety.
• Install the unit in a well-ventilated area where the
ambient temperature is above 50°F and below 95°F.
• The temperature range for this kegerator is
optimized for beverage storage. Perishable food
items may require a different storage environment.
• Do not place hot or warm items into the kegerator
before they cool down to room temperature.
• This unit is designed to be installed outdoors but
must be protected from rain, sleet, snow, and/or
moisture.
• This unit is not intended to be used by children.
• Children should be supervised to ensure that they
do not play with this product.
• Never allow children to crawl inside the kegerator.
If disposing the unit, remove the door.
• Do not use this unit near flammable gas or
combustibles, such as gasoline, benzene, thinner,
etc.
• Do not place the unit near heat sources such as
ovens, grills, or direct sunlight.
• Only use in an upright position on a flat, level
surface and provide proper ventilation.
• Do not pinch or kink the power supply line between
the unit and cabinet.
• Do not leave any cleaning solutions in the unit
• Do not use solvent-based cleaning agents or
abrasive solutions to clean the unit as they may
damage the interior and exterior.
• Do not place any other appliances on top of the unit.
• Do not turn the unit upside down, on its side, or at
an angle off level.
• If your model is equipped with a lock, take care to
keep the keys away from children.
• Do not move the unit without emptying the contents
and securing the door in a closed position.
Table of Contents
IMPORTANT SAFETY INFORMATION ................................................................. I
INTRODUCTION ................................................................................................... 1
PARTS IDENTIFICATION ..................................................................................... 2
BACK VIEW .......................................................................................................... 2
FRONT VIEW ........................................................................................................ 2
ACCESSORIES ..................................................................................................... 3
INSTALLING THE KEGERATOR ......................................................................... 4
ELECTRICAL REQUIREMENTS ................................................................................ 4
Recommended grounding method ................................................................ 4
LEVELING THE KEGERATOR .................................................................................. 5
INSTALLING THE DOOR HANDLE ............................................................................ 5
INSTALLING THE CASTERS .................................................................................... 5
REVERSING THE DOOR SWING .............................................................................. 6
FREE-STANDING INSTALLATION ............................................................................ 7
Guard Rail ..................................................................................................... 7
Drip Tray........................................................................................................ 7
BUILT-IN INSTALLATION ........................................................................................ 8
Installation Requirements .............................................................................. 8
KEG LOADING ...................................................................................................... 9
OPERATION ........................................................................................................ 10
INSTALLATION CHECK LIST BEFORE OPERATION .................................................. 10
USING THE TEMPERATURE CONTROL PANEL ....................................................... 10
NORMAL SOUNDS .............................................................................................. 11
DEFROSTING ..................................................................................................... 11
PREPARING THE KEGERATOR FOR STORAGE ....................................................... 11
CLEANING AND MAINTENANCE ...................................................................... 12
EXTERIOR CLEANING ......................................................................................... 12
INTERIOR CLEANING ........................................................................................... 12
TROUBLESHOOTING ........................................................................................ 12
TROUBLESHOOTING CONTINUED ......................................................................... 13
SPECIFICATIONS ............................................................................................... 14
First Time Operating Instructions
Before use, make sure all packaging labels and materials are all removed from
the unit. Be sure to keep track of all included parts and pieces before discarding
packaging materials. It is advised that you keep the original box and packaging
materials in case you are ever to move or ship the appliance in the future.
Let the unit stand for at least 24 hours before you use it; this allows the cooling
components time to settle from transit. The instruction manual should be read
before use.
This owner's manual is provided for reference use only. Specifications may
change without prior notice. Refer to the product label on the back of your
kegerator for the latest technical information.
EdgeStar Built-in Kegerator ii
Introduction
Thank you for purchasing this EdgeStar kegerator. We are glad you chose us.
We believe that your purchase of this product opens a relationship between you
and EdgeStar. We will provide the customer support needed to nurture that
relationship.
This manual contains important information regarding the proper installation, use
and maintenance of your kegerator. Following this manual will ensure that your
product will work at its peak performance and efficiency.
Please save the original product packaging in case you need to safely transport
your kegerator.
For Your Records:
Please write down the model number and serial number
below for future reference. Both numbers are located on the
ratings label on the back of your unit and are needed to
obtain warranty service. You may also want to staple your
receipt to this manual as it is the proof of your purchase, and
is also needed for service under your warranty.
Model Number:
Serial Number:
Date of Purchase:
To better serve you, please do the following before contacting customer service:
• If you received a damaged product, immediately contact the retailer or
dealer that sold you the product.
• Read and follow this instruction manual carefully to help you install, use
and maintain your kegerator.
• Read the troubleshooting section of this manual as it will help you
diagnose and solve common issues.
• Visit us on the web at http://www.edgestar.com to register your
product, download product guides, additional troubleshooting resources
and up-to-date information.
• If you need warranty service, our friendly customer service
representatives are available via email at service@edgestar.com or by
telephone at 1 (866) 319-5473.
Parts Identification
Front View
LED Light Bar
Internal Fan with
Fan Pipe
For Cooling of
Dispense Tower
Front Vent
/
im....
/
Control Panel
Opening for
Dispense Tower
m
Compressor Step
i Lock
Leveling Foot
Can be replaced
with casters
Back View
Tip: Gather the model
and serial number
from the product label
and write them down
before installing the
kegerator.
Cabinet
Product Label
Power Plug
]
ii iiiii iiiiii iiiiii' • i_]
EdgeStar Built-in Kegerator 2
Accessories
Your kegerator will come with a set of standard accessories. These
include dispense tower screws, installation pegs, drip tray, guard
rail, handle and casters. The other accessories you receive for the
dispense kit and Co2 tank will be based upon the type of kegerator
you purchase.
Standard Accessories:
NOTE: The type of
kegerator you purchase
will determine the type of
accessories you will
receive for the dispense
kit. The most common
options include single,
dual, and triple taps.
4 - Dispense Tower
Screws
For attaching dispense
tower to cabinet
1 - Drip Tray
1 - Handle
4 - Installation
Pegs
1 - Guard Rail
lncludes 4 small
SCF_WS fOF
installation
4 - Casters
Includes" 16
screws for
installation
Loading...