Echo Bear Cat CH8540, CH9540H User Manual
GETTING THE MOST FROM YOUR TRACTOR!
8 & 9" PTO CHIPPERS!
Model CH9540H (72854) has the capacity
you need with a powerful hydraulic feeding
system. The hydraulic feed system makes
chipping much easier by helping guide
branches into the chipper housing.
Four reversible chipper blades mounted
on a dynamically balanced disc weigh in at
275 lbs. [125kg] Maintenance and service
is quick and easy with a hinged disc cover.
Model CH8540 (71854)
Model Engine Size Chipper Feed Feed Weight 3 Point PTO
(LxWxH) Capacity System Opening (Lbs.) Hitch
CH8540 PTO 52"x47"x93" 8" manual feed 9"x9" 885 Cat. 1 540 rpm
(71854)
CH9540H PTO 69"x50"x93" 9" hydraulic 9"x9" 1300 Cat. 1 540 rpm
(72854)
Option:
74898-00 Auto-Feed Kit for Model 72854
* For Use on Tractors with Engine Horsepower Ratings from 25 to 60 hp
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O. Box 849, West Fargo, ND 58078
Email: sales@BearCatProducts.com
Fax: 701.282.9522
8 & 9" PTO Chipper Specs
Models CH8540 (71854), CH9540H (72854)
76cm [30"] DIAMETER DISC
1.25" [76cm] diameter by 1.25" [3.2cm] thick rotor disc
that weighs 275 lbs. [125kg]. Machined to balance. Disc
turns at 1500 RPM. .75" [4.45cm] diameter rotor shaft.
FOUR CHIPPING BLADES
4 - Reversible Chipper Blades, heat treated chipper steal with a chrome content
HYDRAULIC FEED SYSTEM
Standard only on model CH9540H (72854)
White 45 cu. in. [737cc] hyd motor, 10-micron spin on lter. Self-contained system with innite speed settings, dedicated neutral and full
reverse, pump output. 25 liters/min [6.6 gal per min.] and 4HP with
maximum pressure and maximum ow. Feed system operates under
[1750 PSI [119atm], 3 gal. [11.4 liter] tank capacity.
Single 15" [38cm] diameter top feed roller. Feed rate is
0 - 150 FPM [0-45 meters/min.].
FEED SYSTEM
15" diameter
45 degree chipping blade edge angle pulls the logs and limbs.
Infeed hopper opening is 9"x9" [23cm x 23cm].
Drop-down feed tray with locking safety pin.
EASY ACCESS
The rotor is accessible through the hinged disc cover, which exposes one half of the disc for easy access
to the chipping blades and for easy clean out.
TRIPLE-BANDED BELT DRIVE FOR
BETTER TRANSFER OF POWER
TELESCOPING TONGUE
Adjustable length and height. The length may be adjusted
up to 45 cm [18"] with 4 pin settings on the pintle hitch.
5cm [2"] coupler hitch available as an accessory.
DIMENSIONS:
Model 71854 – Length 52" • Width 47" • Height 93"
Model 72854 – Length69" • Width 50" • Height 93"
360 DEGREE ROTATIONAL BED
The 360 Degree, 8" discharge chute gives
accurate control over the ow of chips
WEIGHTS
Model CH8540 (71854) – 885 lbs
Model CH9540H (72854) – 1300 lbs
SAFETY
• Safety chains standard
• Meets all applicable ISO and CE safety standards.
HEAVY-DUTY CONSTRUCTION
9"x9" [.95cm] thick steel face plate on the disc housing; .25"
[6.35mm] thick steel on the wrap around with welded construction.
INTEGRATED BLOWER
Put the chips where you want them with the dedicated blower. 360°
rotatable, 8" [20cm] diameter steel tubing with adjustable spout
cap allows you to put the chips where you want them the rst time.
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O. Box 849, West Fargo, ND 58078
Email: sales@BearCatProducts.com
Fax: 701.282.9522
Loading...