Echo Bear Cat CH6614, CH6614H User Manual

GETS THE JOB DONE!

Has a 360-degree rotating bed, you can feed the hopper from any direction. These towable chippers come standard with a torsion axle suspension.

6" Chippers!

Chipper is pre-wired for the optional (73244) digital programmable feed sensor and hour meter. This option is available only on the CH6614H (72620).

“We've always been very satised

with ECHO Bear Cat equip-

ment. It is very durable and we would recommend it to anyone.”

Ron Williams Orangeville, Ontario

Model CH6614H (72620)

Model Engine Size Chipper Feed Feed Start Weight Tires (LxWxH) Capacity System Opening (Lbs.) Base

CH6614 Honda 76"x80"x90" 6" Manual feed 9"x9" Electric 1445 5.30" x 12" (71620) 614cc pneumatic

CH6614H Honda 93"x80"x90" 6" Hydraulic 9"x9" Electric 1865 5.30" x 12" (72620) 614cc pneumatic

Option: 73244 Digital Programmable Feed Sensor and Hour Meter for Model 72620

Find a dealer near you!

Call us at 800.247.7335 or

Log onto www.BearCatProducts.com

237 12th St. NW • P.O. Box 849, West Fargo, ND 58078

Email: sales@bearcatproducts.com

Fax: 701.282.9522

6" Chipper Specs

76cm [30"] DIAMETER DISC

1.25" [76cm] diameter by 1.25" [3.2cm] thick rotor disc that weighs 275 lbs. [125kg]. Machined to balance. Disc turns at 1500 RPM. .75" [4.45cm] diameter rotor shaft.

FOUR CHIPPING BLADES

All have the same reversible chipper blades, heat

treated chipper steel with a chrome content

ENGINE

Honda 20 hp engine with electric start

6.6 gallon [25 liters] fuel tank Fuel consumption is 1.92 gal. [7.27 liters] pH at full load

MANUAL BELT ENGAGEMENT LEVER ON TOWABLE MODELS

FEED SYSTEM

45-Degree chipping blade edge angle pulls the logs and limbs into the 71620. The Hydraulic feed helps guide wood into the chipping mechanism on model 72620.

EASY ACCESS DISC

The rotor is accessible through the hinged disc cov-

er, which exposes one half of the disc for easy access

to the chipping blades and for easy clean out.

HEAVY-DUTY CONSTRUCTION

.375" [9.5mm] thick steel face plate on the disc housing .25" [6.35mm] thick steel on the wrap around with welded construction

FEED CHUTE

Has an opening size of 30.25" x 30.75" [76.8cm x 78.1cm], tray 28.31"

[71.9cm] off the ground. Feed table is 38" [96.5cm] long.

MAXIMUM FEED SIZE - 6"

ADJUSTABLE JACK (Towable Models Only)

Roller wheel with 850 lbs. [372 kg] rating. Adjustable jack alows one

person to easily maneuver the chipper around and hook up to a vehicle.

HIGHWAY TOWABLE

68" [172cm] tread width (center to center), 5.30" x 12" [13.5cm x 30.5 cm] tires, coupled with torsion axle suspension en-

ables the chipper to be easily towed down the highway. Light

kit, and safety chains are standard, with 2,250 lb. axle.

DIMENSIONS:

• CH6614 (71620) - Length 76" • Width 80" • Height 90"

• CH6614H (72620) - Length 93" • Width 80" • Height 90"

Weight

• CH6614 (71620) – 1445 lbs

• CH6614H (72620) – 1865 lbs

Safety

• Meets all ANSI safety standards.

• 12 Volt Safety and Directional Lighting

INTEGRATED DISCHARGE BLOWER

Put the chips where you want them with the dedicated blower. 360° rotatable, 8" [20cm] diameter steel tubing with adjustable spout cap allows you to put the chips where you want