L0199 09-04.qxd 14/2/05 10:13 am Page 1
THE COMPLETE PAINT SPRAYING SYSTEM
OPERATING INSTRUCTIONS
Thank you for purchasing the Earlex HVLP Spray Kit. This is a highly versatile spray kit and can be used on a variety of applications.
BEFORE USE - PLEASE READ THE SAFETY &
OPERATING INSTRUCTIONS.
Please retain for future reference
L0199 09-04.qxd 14/2/05 10:13 am Page 2
SAFETY OPERATING INSTRUCTIONS
PLEASE READ BEFORE USE
●NEVER under any circumstances aim the nozzle at another person or animal. In the event of injury occurring seek expert medical advice immediately.
●The spray gun must only be used with paints and solvents that have a suitable flash point for spraying. If in doubt consult paint or solvent manufacturer’s data.
●Always ensure there is adequate ventilation when spraying.
●NEVER spray near a naked flame, including appliance pilot flame.
●NEVER use this spray gun outside when its raining.
●NEVER smoke whilst spraying.
●NEVER allow children to operate or play with the spray gun.
●Always read the paint manufacturer’s thinning instructions before using.
●Always disconnect unit from mains supply when refilling the paint container.
●Before cleaning, always disconnect unit from the mains supply.
●Always wear the correct protective face mask when spraying. We would also recommend the use of gloves, goggles and overalls.
●After every use ensure that you clean your spray gun thoroughly and grease the fluid needle packing.
●Use only genuine Earlex replacement parts.
WARNING: The substances used with this spray gun (paint, thinners etc) may contain hazardous, harmful, explosive or corrosive materials. ALWAYS COMPLY WITH THE SAFETY INSTRUCTIONS ISSUED WITH THIS PRODUCT AND THE MATERIAL BEING USED.
Only use the unit as detailed in these instructions.
TECHNICAL SPECIFICATION
Supply Voltage |
230V (50Hz) |
Output control |
690g/min (water) |
Rated Input |
800 Watts |
Spray Gun Weight (empty) |
1100gms |
Airflow (motor) |
1550 ltr/min |
Container Capacity |
1 Litre |
Cable Length |
1.7m |
Appliance Class |
Class 2, |
Hose Length |
4m |
|
double insulated |
2
L0199 09-04.qxd 14/2/05 10:13 am Page 3
SPARE PARTS DRAWING
The following parts are available from Earlex. Please phone our Helpline on 01483 454666.
|
|
SPARE PARTS LIST |
|
||
Key Description |
Part No. |
Key Description |
Part No. |
||
1. |
Air Cap Ring |
L0151 |
15. |
Gland Nut |
L0173 |
2. |
Air Cap |
L0152 |
16. |
Gland Washer (2 pcs) |
L0168 |
3. |
Air Distributor Plate Assy |
L0162 |
17. |
Paint Container |
L0190 |
4. |
Fluid Tip, 2.0mm |
L0157 |
18. |
Centre Bolt Nut |
L0189 |
5. |
Fluid Tip Seal |
L0159 |
19. |
Gasket |
L0188 |
6. |
Pivot Screw |
L0179 |
20. |
Lid Assy |
L0187 |
7. |
Washer |
L0195 |
21. |
Shim |
L0186 |
8. |
Main Body Assy |
L0180 |
22. |
Clamp Lever |
L0185 |
9. |
Fluid Needle 2.0mm |
L0166 |
23. |
Yoke |
L0184 |
10. |
Adaptor |
L0174 |
24. |
Centre Bolt & Pick Up Tube Assy |
L0183 |
11. |
Spring |
L0175 |
25. |
Operating Lever |
L0177 |
12. |
Adjusting Screw |
L0176 |
26. |
Viscosity Cup |
SG243 |
13. |
Pivot |
L0178 |
27. |
Spanner |
L0191 |
14. |
Air Feed Tube |
L0182 |
28. |
Motor Unit (not available) |
L0228 |
OPTIONAL EXTRAS
Needles & Fluid Tips of different sizes can be obtained as sets under the following accessory numbers. Please call our helpline to order these on 01483 454666.
1.0mm dia Fluid Tip, needle & seal |
L0224 |
2.0mm dia Fluid Tip, needle & seal |
L0226 |
1.5mm dia Fluid Tip, needle & seal |
L0225 |
2.5mm dia Fluid Tip, needle & seal |
L0227 |
3