HV1900
OPERATING INSTRUCTIONS
Thank you for purchasing the Earlex Spray System kit.
This is a highly versatile spray kit and can be used on a variety of applications.
BEFORE USE - PLEASE READ THESE SAFETY & OPERATING INSTRUCTIONS.
Please retain for future reference
INSTRUCTIONS D'UTILISATION
Nous vous remercions d'avoir acheté le système de peinture basse pression de Earlex.
Il s'agit d'un appareil HVLP (haut volume d'air, basse pression de peinture) extrêmement polyvalent dont
vous pouvez vous servir pour une grande variété d'applications.
AVANT UTILISATION - VEUILLEZ LIRE LES INSTRUCTIONS POUR L'EMPLOI ET LA SÉCURITÉ.
Veuillez conserver pour référence ultérieure
INSTRUCCIONES DE FUNCIONAMIENTO
Gracias por adquirir el kit Earlex Spray System.
Éste es un kit de pintado aerográfico altamente versátil que puede utilizarse en gran
variedad de aplicaciones.
ANTES DEL USO - LEA ESTAS INSTRUCCIONES DE SEGURIDAD Y FUNCIONAMIENTO.
Conserve estas instrucciones para su futura consulta
INSTRUCCIONES DE SEGURIDAD
¡ADVERTENCIA! RIESGO DE INCENDIO Y EXPLOSIÓN.
HVLP PAINT SPRAYING KIT
2
● CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK OR INJURY, DO NOT
EXPOSE TO RAIN. STORE INDOORS.
● The substances used with this spray applicator
(paint, thinners etc) may contain hazardous,
harmful, explosive or corrosive materials.
ALWAYS COMPLY WITH THE SAFETY
INSTRUCTIONS ISSUED WITH THIS PRODUCT
AND THE MATERIAL BEING USED.
● The spray applicator must only be used with paints
and solvents that have a suitable flash point for
spraying. If in doubt, consult the paint or solvent
manufacturer's data
● Always ensure there is adequate ventilation when
spraying.
● NEVER spray near an open flame, including an
appliance pilot flame.
● NEVER smoke when spraying.
● Always disconnect the unit from the power supply
when re-filling the paint container.
● Always disconnect the unit from the power supply
when cleaning the spray applicator.
● Always ensure the spray area is safe and free from
all debris that may present a fire or trip hazard.
● NEVER, under any circumstances, point the spray
gun at another person or animal. In the event of
injury occurring, seek expert medical advice
immediately.
● NEVER allow children or unauthorized users to
operate or play with the spray equipment.
● Always read the paint manufacturer's thinning
instructions before use.
● Always wear the correct protective face mask
when spraying. We also recommend wearing
gloves, goggles and overalls.
● After every use ensure that you clean the spray
gun thoroughly & grease the gland washer.
● Use only genuine Earlex replacement parts.
● Only use the spray equipment as detailed in these
instructions.
● Do not use the air hose or power cord to pull the
HVLP unit.
● Check the hoses, hose connectors & power cord
daily. Any worn or damaged parts should be
replaced immediately.
● This appliance is recommended for household
use only.
● This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
SAFETY INSTRUCTIONS
WARNING! FIRE AND EXPLOSION HAZARD.
IMPORTANT ELECTRICAL INFORMATION
EXTENSION CORDS
Your Earlex HVLP is supplied with a power cord that is 6 feet long. Make sure your extension cord is in good
condition. When using an extension cord, be sure to use one heavy enough to carry the current your product
will draw. For lengths between 0 feet and 50 feet, No 18 AWG extension cords should be used.
DOUBLE INSULATED APPLIANCE
This is a double insulated appliance and as such, does not require three-way grounding. This product is
equipped with a polarized alternating current line plug (a plug having one blade wider than the other) and does
not require a grounding adapter. This plug will fit into the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,
contact a qualified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
SERVICING OF A DOUBLE-INSULATED PRODUCT
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding
means is provided on a double-insulated product, nor should a means for grounding be added to the product.
Servicing of a double-insulated product requires extreme care and knowledge of the system, and should be
done only by qualified service personnel. Replacement parts for a double-insulated product must be identical
to those parts in the product.
A double-insulated product is marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED.”
The symbol may also be marked on the product.
2
3
4
5
6
7
8
9
10
12
13
17
1
11
15
14
16
18
3
EXPLODED PARTS VIEW
.oN traPnoitpircseD yeK
01. Air Cap Ring L0215
5020LpaC riA.20
03. Spray Direction Plate L0206
04. Fluid Tip (0.08”)(2mm) L0237
05. Fluid Tip Seal L0211
06. Fluid Needle (0.08”)(2mm) L0236
6120LgnirpS.70
08. Fluid Adjusting Screw L0210
8020LtuN dnalG.90
.oN traPnoitpircseD yeK
2720LlaeS dnalG.01
11. Paint Container Seal L0335
12. Paint Feed Tube L0214
13. Paint Container (Clear) L0201
2020LreggirT.41
9020LniP reggirT.51
16. Hose Assembly L0543
17. Viscosity Cup SG243
0920LretliF .81
PARTS LIST
Loading...