Dynon Avionics EMS-D10 User Manual
EMS-D10
Engine Monitoring System
Pilot’s User Guide
P/N 100438-000, Revision H
For use with firmware version 5.4
August, 2010
Dynon Avionics
This product is not approved for
installation in type certificated aircraft
Contact Information
Dynon Avionics, Inc.
19825 141
Woodinville, WA 98072
Phone: (425) 402-0433 - 7:00 AM – 5:00 PM (Pacific Time) Monday - Friday
Fax: (425) 984-1751
Dynon Avionics offers online sales, extensive support, and continually-updated information on its products via its Internet sites:
st
Place NE
www.dynonavionics.com
docs.dynonavionics.com
downloads.dynonavionics.com
support.dynonavionics.com
store.dynonavionics.com
wiki.dynonavionics.com
contributed by Dynon employees and customers.
forum.dynonavionics.com
outside of telephone support hours. A key feature of the forum is that it allows the exchange of diagrams, photos, and other types of files.
newsletter.dynonavionics.com
blog.dynonavionics.com
–Dynon Avionics primary web site; including:
– Current and archival documentation.
– Software downloads.
– Support resources.
– Dynon’s secure online store for purchasing all Dynon products 24 hours a day.
– Dynon Avionics’ Documentation Wiki provides enhanced, extended, continuously-updated online documentation
– Dynon Avionics’ Internet forum where Dynon customers can interact and receive Dynon technical support
– Dynon’s email newsletter.
– Dynon’s blog where you can find new and interesting Dynon-related content.
Copyright
2003-2009 Dynon Avionics, Inc. All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated or stored in any
storage medium, for any purpose without the express written permission of Dynon Avionics. Dynon Avionics hereby grants permission to download a
single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed for personal use,
provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further
that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Introduction
Information in this document is subject to change without notice. Dynon Avionics reserves the right to change or improve its products and to make
changes in the content without obligation to notify any person or organization of such changes. Visit the Dynon Avionics website
(www.dynonavionics.com
) for updates and supplemental information concerning the use and operation of this and other Dynon Avionics products.
Limited Warranty
Dynon Avionics warrants this product to be free from defects in materials and workmanship for three years from date of shipment. Dynon Avionics
will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer
for parts or labor. The customer is, however, responsible for any transportation cost. This warranty does not cover failures due to abuse, misuse,
accident, improper installation or unauthorized alteration or repairs.
THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE, AND IN LIEU OF ALL OTHER WARRANTIES
EXPRESSED OR IMPLIED, INCLUDING ANY LIABILITY ARISING UNDER WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY
VARY FROM STATE TO STATE.
IN NO EVENT SHALL DYNON AVIONICS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES,
WHETHER RESULTING FROM THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT.
SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS
MAY NOT APPLY TO YOU.
Dynon Avionics retains the exclusive right to repair or replace the instrument or firmware or offer a full refund of the purchase price at its sole
discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.
These instruments are not intended for use in type certificated aircraft at this time. Dynon Avionics makes no claim as to the suitability of its products
in connection with FAR 91.205.
Dynon Avionics’ products incorporate a variety of precise, calibrated electronics. Except for replacing the optional internal backup battery in EFISbased products per the installation guide, our products do not contain any field/user-serviceable parts. Units that have been found to have been taken
apart may not be eligible for repair under warranty. Additionally, once a Dynon Avionics unit is opened up, it will require calibration and verification
at our Woodinville, WA offices before it can be considered airworthy.
EMS-D10 Pilot’s User Guide iii
Table of Contents
Contact Information..............................................................................................................................................................ii
Copyright.............................................................................................................................................................................. ii
Limited Warranty ................................................................................................................................................................iii
1. Introduction 1-1
Before You Fly ..................................................................................................................................................................1-1
OEM Installations..............................................................................................................................................................1-1
Warning .............................................................................................................................................................................1-2
About this Guide................................................................................................................................................................1-2
2. Product Overview 2-1
EMS-D10 Hardware..........................................................................................................................................................2-1
3. Product Operation 3-1
Front Panel Layout ............................................................................................................................................................3-1
Display...............................................................................................................................................................................3-2
Menus ................................................................................................................................................................................3-6
4. Available Pages 4-1
EMS Main Page.................................................................................................................................................................4-2
EMS Times/Auxiliary Page...............................................................................................................................................4-3
EMS Fuel Computer Page .................................................................................................................................................4-4
Lists Pages.........................................................................................................................................................................4-5
Menu Pages .......................................................................................................................................................................4-6
EMS-D10 Pilot’s User Guide v
Table of Contents
5. Alerts 5-1
Alarm Indicators ............................................................................................................................................................... 5-1
Multiple Alarms................................................................................................................................................................ 5-3
Latching and Self-clearing Alarms ................................................................................................................................... 5-4
DSAB Alerts..................................................................................................................................................................... 5-4
6. EMS Monitoring 6-1
Engine Leaning and Power............................................................................................................................................... 6-1
Data Logging .................................................................................................................................................................... 6-2
7. EMS Operation 7-1
ON/OFF............................................................................................................................................................................ 7-1
Display Brightness (DIM) ................................................................................................................................................ 7-1
Fuel Computer .................................................................................................................................................................. 7-2
Engine Leaning................................................................................................................................................................. 7-3
Clock Setup....................................................................................................................................................................... 7-3
Timers............................................................................................................................................................................... 7-4
Global Configuration Settings .......................................................................................................................................... 7-5
8. Appendix 8-1
Appendix A: Serial Data Output....................................................................................................................................... 8-1
Appendix B: PC Support Program.................................................................................................................................... 8-5
Appendix C: Troubleshooting .......................................................................................................................................... 8-5
Appendix D: EMS-D10 Specifications............................................................................................................................. 8-6
vi EMS-D10 Pilot’s User Guide
1. INTRODUCTION
Thank you for purchasing the Dynon Avionics EMS-D10. This section provides some important cautionary information
and general usage instructions for this manual.
Before You Fly
We strongly recommended that you read this entire guide before attempting to use the EMS-D10 in an actual flying
situation. Additionally, we encourage you to spend time on the ground familiarizing yourself with the operation of the
product. While first learning to use the instrument in the air, we recommend you have a backup pilot with you in the
aircraft. Finally, we encourage you to keep this manual in the aircraft with you at all times. This document is designed to
give you quick access to information that might be needed in flight. CAUTION: in a flying situation, it is the pilot’s
responsibility to use the product and the guide prudently.
OEM Installations
If your EMS-D10 is installed by an OEM distributor, you may find that you are unable to access some menus and
settings. Some Dynon distributors customize various areas of the EMS-D10 firmware to maintain a consistent pilot
experience and minimize integration issues across a large number of installations. Currently, OEMs can customize
access levels to the following settings on Dynon systems: EMS GLOBAL setup menu, EMS SENSOR setup menu, fuel
calibration, trim calibration, flaps calibration, GPS/NAV setup menu, screen configurations, data logging, and
checklists/data panels. OEM distributors have the option of customizing some or all of these areas. Please contact your
aircraft’s manufacturer if you have any questions about how your unit has been customized.
EMS-D10 Pilot’s User Guide 1-1
Introduction
Warning
Dynon Avionics’ products incorporate a variety of precise, calibrated electronics. Except for replacing the optional
internal backup battery in EFIS-based products per the installation guide, our products do not contain any field/userserviceable parts. Units that have been found to have been taken apart may not be eligible for repair under warranty.
Additionally, once a Dynon Avionics unit is opened up, it will require calibration and verification at our Woodinville,
WA offices before it can be considered airworthy.
About this Guide
This guide serves two purposes. The first is to help you configure and get acquainted with the EMS-D10‘s many
functions. The second is to give you quick access to vital information. For detailed technical and installation information,
please refer to the EMS-D10 Installation Guide.
In the electronic (.PDF) version of this manual, page and section references in the Table of Contents and elsewhere act as
hyperlinks taking you to the relevant location in the manual. The latest version of this manual may be downloaded from
our website at docs.dynonavionics.com
This guide discusses the most common operation scenarios. If you have an operational issue that is not discussed in this
guide, you can find additional operational information on Dynon’s Internet sites:
.
wiki.dynonavionics.com
documentation contributed by Dynon employees and customers.
forum.dynonavionics.com
discuss installation and operational issues relating to Dynon Avionics products. The Forum is especially useful for
pilots with uncommon aircraft or unusual installation issues. For customers that cannot call Dynon Technical
Support during our normal business hours, the Forum is a convenient way to interact with Dynon Avionics
Technical Support. The Forum allows online sharing of wiring diagrams, photos, and other types of electronic files.
1-2 EMS-D10 Pilot’s User Guide
– Dynon’s Documentation Wiki provides enhanced, extended, frequently updated online
– Dynon’s Online Customer Forum is a resource for Dynon Avionics customers to
Introduction
The following icons are used in this guide:
Any text following this icon describes functionality available only with the HS34 HSI Expansion Module
connected to your system.
Any text following this icon describes functionality available only with the AP74 Autopilot Interface Module
connected to your system.
Any text following this icon describes functionality that is possible when multiple Dynon Avionics products are
networked together via the Dynon Smart Avionics Bus (DSAB).
Any text following this icon refers to a setting or situation which merits particularly close attention.
EMS-D10 Pilot’s User Guide 1-3
2. PRODUCT OVERVIEW
This EMS-D10 monitors your engine and other vital aircraft systems and displays information in an easy-to-read format.
This section provides a general overview of the various parts of the EMS-D10 as well as a theory of operation. The
information in this section serves as a reference only and helps familiarize you with the inner workings of the unit. It
should not be used for diagnostic or reparative work.
EMS-D10 Hardware
The EMS-D10’s versatile design accommodates a wide range of engines and sensors. You may configure the system to
meet your monitoring requirements covering both air- and water-cooled engines with up to six cylinders. Its warning
capabilities provide early notification of problems that might otherwise go unnoticed.
POWER
The EMS-D10 requires between 10 and 30 volts DC for operation. It is acceptable to have the EMS-D10 turned on
during engine start.
SENSORS AND INPUTS
When connected to the appropriate sensors, the EMS-D10 displays RPM, manifold pressure, oil temperature and
pressure, exhaust gas temperature (EGT), cylinder head temperature (CHT), fuel levels for up to 4 tanks, voltage,
current, fuel pressure, fuel flow, carburetor air temperature, coolant pressure and temperature, outside air temperature,
flaps, trim, and the status of up to two external contacts. Fuel endurance and economy information can be obtained when
a compatible GPS unit is connected to your system.
EMS-D10 Pilot’s User Guide 2-1
Product Overview
DYNON SMART AVIONICS BUS
If you have multiple Dynon Avionics products in your aircraft, they may be networked together via the Dynon Smart
Avionics Bus (DSAB). Units networked via DSAB have the ability to transmit information to each other. Any product's
data can then be viewed on any other screen in the DSAB network. For example, an EFIS has the ability to display
engine monitor information if it is connected to an EMS or FlightDEK-D180.
Note that the failure of a unit in a DSAB network may cause the loss of some or all data shared between units. In the
above example, if the connected EMS/FlightDEK-D180 were to fail, the EFIS would no longer be able to behave as an
engine monitor. For more information on DSAB-specific alerts, refer to the DSAB Alerts section on page 5-4.
OUTPUTS
The EMS-D10 has outputs to drive external customer-supplied audible and visual devices for engine, AOA (if installed)
and altitude alerts.
A connected HS34 or AP74 can output voice annunciations for many of the alerts generated by the EMS-D10.
DISPLAY
The display is a 4-inch, 320 by 240 pixel, 450-nit LCD screen.
BUTTONS
User interaction takes place via the six buttons along the bottom of the front panel of the unit.
2-2 EMS-D10 Pilot’s User Guide
3. PRODUCT OPERATION
After reading this section, you will be familiar with the basics of how to use your EMS-D10. For details regarding
specific procedures (e.g., adjusting display brightness, using the fuel computer, setting the clock, etc.) please refer to the
EMS Operation section.
Front Panel Layout
All normal operation of the EMS-D10 happens via the front panel. The
front panel contains buttons and a display.
Buttons – There are six buttons on the front panel of the EMS-
D10. Throughout this guide, these buttons are referred to as one
through six, with button one being the leftmost and button six
being the rightmost. EMS-D10 buttons are used to turn the
instrument on and off, cycle between screens, scroll through
menus, and adjust instrument parameters.
Display – The display shows engine parameters, menus, and data
obtained from other connected products.
2 3 4 5 6
1
User interaction takes place via the EMS-D120 main
display and the six buttons beneath. Note: buttons are
not labeled on actual product
EMS-D10 Pilot’s User Guide 3-1
Product Operation
Display
The EMS-D10 display is the most obvious and commonly used output of the device. It displays all EMS-related data
and, when connected to other data sources, can display EFIS and HSI data as well.
SCREENS AND PAGES
The terms in the following bulleted list are used in this section and are defined as follows:
Screen/Screen Configuration – Screens consist of one or two pages
from the EMS-D10 or from another DSAB-connected Dynon
Avionics product.
Page – A page is a section of the screen that contains a collection of
related data. Pages may occupy the total area of the screen (i.e.,
100%) or share the screen with other pages (i.e., 1/2 split).
Screen Rotation – The rotation is the list of screen configurations
which can be cycled to via the hotkeys. Your rotation is usually
smaller than the total list of available screen configurations.
Screens contain one or two pages and pages
contain groups of similar information.
3-2 EMS-D10 Pilot’s User Guide
Product Operation
The EMS-D10 has several pre-defined screen configurations. The
basic layout of a screen configuration is represented by one of two
icons on D10-series product. The table below shows the two icons
and their meaning.
The predefined screen configurations with their respective icons
are as follows:
EMS (default EMS-D10 boot-up screen; in default rotation)
TIMES/AUX (in default screen rotation)
FUEL (in default screen rotation)
EFIS
HSI
Icon Left Page Area Right Page Area
The SCREEN LIST Menu uses icons to illustrate the
layout for each screen configuration.
1/2 1/2
One page that occupies all of the screen
area
EMS-D10 Pilot’s User Guide 3-3
Product Operation
CYCLING BETWEEN SCREENS
There are two methods for cycling between pre-defined screens: via the
menu and via hotkeys.
Screen Cycling Using the SCREEN LIST
Hold for two seconds
Navigate to the SCREEN LIST menu by holding button six for at least
two seconds when no menu is present (see the figure to the right). Note
that if you only press button six momentarily, the display cycles to the
next screen in your screen rotation. Use the DOWN▼/UP▲ buttons to
move the caret (>). The caret denotes the selected screen. Press
GOTO► to remove the SCREEN LIST and display the selected screen.
If you wish to stay on the same screen, you may either select your
currently displayed screen with the caret and press GOTO►, or press
CANCEL.
Screen Cycling Using Hotkeys
With no menu displayed, press button one to cycle to the previous screen
in your rotation. Likewise, press button six to cycle to the next screen
in your rotation (see the figure on the next page). Cycling via hotkeys
only allows you to display screens that are in your screen rotation. They
are meant to give you quick access to the screen configurations that are
With no menus displayed, pressing button six
for two seconds displays the SCREEN LIST
menu, from which you may switch to, and set
up, various screen configurations.
most important to you. If you wish to access screens that are not in your
rotation, use the SCREEN LIST as described above.
3-4 EMS-D10 Pilot’s User Guide
Product Operation
Changing the Screen Rotation
You may use the out-of-the-box screen rotation or define your own. If you desire to use the initial rotation, no user
configuration is required. If you desire to use a custom cycling order, then user configuration is necessary.
To configure a custom rotation, navigate to the SCREEN LIST menu
page by pressing button six for approximately two seconds when no
menu is present. Press SETUP, then press ROTATN to display the
menu used to change the boot and rotation screen. Scroll through the
pre-defined screens using the DOWN▼/UP▲ buttons.
Press the BOOT* button on any selected screen configuration to make it
the screen that is shown immediately after the instrument is turned on.
Only one screen may be designated as the boot screen. Next, press the
TOGGL↕ button on any selected screen to toggle the “↕” icon. All
screens that show the “↕” icon are included in the rotation. Any screen
in the rotation may be accessed via the button one and six hotkeys.
Cycles to
previous
screen
Cycles
to next
screen
Press BACK to save any settings.
Changing the Screen List Order
You may wish to change the order in which screen configurations are
Buttons one and six cycle to the previous
and next screens, respectively.
displayed in the SCREEN LIST, thus changing the order they are cycled
to via hotkeys. To do this, navigate to the SCREEN LIST menu page by pressing button six for approximately two
seconds when no menu is present. Press SETUP, then press ORDER to display the menu used to change the screen
order. Scroll through the pre-defined screens using the DOWN▼/UP▲ buttons. Press the MV DN▼ button to move the
selected screen down in the screen list. Likewise, press the MV UP▲ button to move the selected screen up in the screen
list.
EMS-D10 Pilot’s User Guide 3-5
Loading...