Dynex DX-VS201A User Manual

DX-VS201A

S-Video Audio/Video Selector Switch

Your S-Video Audio/Video Selector Switch lets you connect four video devices (such as a cable box, satellite receiver, DVD player, VCR, or game system) to a TV or home theater receiver that has only one S-Video jack or composite (RCA-type) video jack. Your selector switch acts as a signal splitter to send composite and S-Video signals and analog stereo audio to two destinations, such as a TV and VCR or two TVs.

Package contents

• S-Video Audio/Video Selector Switch

• Quick Setup Guide

Setting up your selector switch

INPUT 1 and INPUT 4 can be used for comp osite video dev ices only. INPUT 2 and INPUT 3 can be use d for either S-Video or composite video dev ices.

The jack s on your selec tor switch are co lor-coded. Mos t video and audio c ables are also color-coded. Plug connec tors into jacks with matching colors.

Note: Cables are not included. To connec t a video device to your select or switch: 1 Plug an S-Video cable into the S-VIDEO jack on INPUT 2 or INPUT 3 on your selecto r switch. Plug the other e nd of the cable in to the S-VIDEO

OUT jack on the S-Vide o device.

OR Plug the yellow (video) connector on an AV cable into the VIDEO jack o n INPUT 1, INPUT 2, INPUT3, or INPUT 4 on yo ur selector switch. Plug

the yellow connector on the other end of th e AV cable into the VIDEO OUT jack on the composi te video device.

2 Plug an analog (RCA) au dio cable into the R (red) and L (white) audi o jacks next to the S-VIDEO jack on your s elector sw itch. Plug the ot her ends

of the ca ble into the R and L AUDIO OUT jacks on the S-Vi deo device. OR Plug the r ed and white conn ectors on th e AV cable into the R (red) and L (white) audio j acks next to the VIDEO jack on yo ur selector switc h.

Plug the other ends of the cable int o the R and L AUDIO OUT jacks on the com posite video d evice.

To connec t a TV or home theater receiver to your selector switch: 1 Plug an S-Video cable into the S-VIDEO jack on OUTPUT 1 or OUTPUT 2 on the back of you r selector s witch. Plug the other end of the cable into

the S-VIDEO IN jack on the T V or home theater recei ver. OR Plug the yellow (video) connector on an AV cable into the VIDEO jack o n OUTPUT 1 or OUTPUT 2 on the back of yo ur selector switch. Plug the

yellow connec tor on the other end of the cable into the VIDEO IN jack on the TV or home theater recei ver. 2 Plug an analog (RCA) au dio cable into the R (red) and L (white) audi o jacks next to the S-VIDEO jack on the b ack of your selector s witch. Plug

the other ends of t he cable into the R and L AUDIO OUT jacks on the S-Video device. OR Plug the r ed and white conn ectors on th e AV cable into the R (red) and L (white) audio j acks next to the VIDEO jack on yo ur selector switc h.

Plug the other ends of the cable int o the R and L AUDIO OUT jacks on the com posite video d evice.

To play from the connected device: 1 On the T V or home theater r eceiver, selec t the video inpu t source for the v ideo jack you connec ted your selec tor switch to. For information about

selec ting a video input source, see the documentation th at came with the T V or home theater recei ver.

2 Press the input selec tor selector but ton on the fron t of your selec tor switch that corre sponds to the jac ks the device yo u want to use is connecte d

to. AV 1 corresponds to INPUT 1, AV 2 corresponds to INPUT 2, AV 3 corresponds to INPUT 3, and AV 4 corresponds to INPUT 4.

Input selector buttons Connect a composite video device

A/V Selector Switch

AUDIO

OUTPUT 2

VIDEO

S-VIDEO

AV1 AV2 AV3 AV4

AUDIO

OUTPUT 1

VIDEO

S-VIDEO

AUDIO

VIDEO

INPUT 4

INPUT 1

AUDIO

INPUT 3

AUDIO R

VIDEO

S-VIDEO

VIDEO

AUDIO

INPUT 2

VIDEO

S-VIDEO

Connect a TV or home theater receiver Connect S-Video or composite video devices Connect a composite video device

One-year limited warranty

For complete warranty, visit www.dynexproducts.com.

Contact Dynex:

For customer service call 1-800-305-2204 www.dynexproducts.com

QUICK SETUP GUIDE

ENGLISH 11-0308