Dynex DX-TCADPT Quick Setup Manual
DX-TCADPT 1875-Watt
International Converter Set
Important safety instructions
Read and review these instructions before using the adapter/converter.
1 Check the product you intend to connect the adapter or converter to
use for the manufacturer’s voltage and wattage rating, which should
be located on the product.
CAUTION: Adapters alone do not convert voltage. To avoid
damaging your appliance, do not use without a voltage converter.
2 Do not leave the converter in the power outlet when not in use. Do
not continue to use the adapter/converter combo if it is not working
properly, has been damaged, or dropped in water.
3 Some appliances may operate a little more slowly when used in
foreign countries operating on 50 cycles (U.S. operates on 60 cycles).
4 At times there may be a very low humming sound in the converter,
appliance, or both. This is normal.
5 Due to unstable voltage in most foreign countries, if your appliance
has a built-in thermostat, it may shut o your appliance prematurely.
This does not mean your appliance or converter (or both) are not
working correctly. After your appliance cools down it should resume
operating correctly.
6 Make sure that the dual voltage selector switch on your appliance,
when provided, is in the correct voltage position before operating
SAVE THESE INSTRUCTIONS
WARNING! This product is intended for adult use. This
product is NOT intended for use by unsupervised children. Choose
proper settings and plug in this product before directly supervising
children using appliances connected to this product.
QUICK SETUP GUIDE
Package contents
• 1875 watt international converter set (includes converter & 5 plugs)
• Quick Setup Guide
Instructions for use
Warning: Indoor use only!
Appliances that operate on 110/120V will not work in most parts of the
world where the voltage is 220/240V. Your dual wattage converter
makes it possible to use your portable appliances almost anywhere in
the world. You simply set the LO/HI switch, plug the converter into the
power outlet, plug your appliance into the converter, then turn on your
appliance.
All appliances have a wattage rating marked on them and should be
checked before using.
Low watt setting
For use with battery chargers, electric shavers, radios, curling irons, and
other appliances that use less than 25 watts. The low setting can be
used for long periods of time on products with electronic circuitry that
are 0–25 watts, for example, battery chargers and radios.
High watt setting
For clothes irons, steamers, some hair dryers, and other appliances that
use from 26 to 1875 watts.
DO NOT use the HIGH setting for electronic circuitry products. The high
setting is designed to be used only for short periods of time
(approximately 10 minutes).
1 Select the correct watt setting.
Check the appliance’s rating plate for watts. If the wattage is not
indicated, multiply voltage by amps, for example,
120 V x 3 amps = 360 watts.
Then set the selector switch to the appropriate setting.
2 Insert the converter into a power outlet.
The converter pins on the converter will t most foreign power outlets.
Plug adapters for other countries are available. See the Adapter plugs
section.
3 Plug in your appliance.
Plug your 110V appliance into the outlet on the converter.
For outlet
types: To use in: Set selector at:
Parts of North America,
Caribbean, & Japan 120 V
Flat parallel Parts of South America,
blades Caribbean, & Japan 240 V
Parts of Middle East, Africa,
Asia, South America 120 V
Round thin pins
Europe, parts of Middle East,
Africa, Asia, South America 240 V
Australia, New Zealand, 240 V
Flat angled blades Fiji, and parts of China
Round thick pins Northern Europe 240 V
Great Britain, Ireland, 240 V
parts of Africa, Hong Kong,
3-prong blades and Singapore
In some countries, you may encounter a recessed outlet or other
shapes of power outlets. This set of adapter plugs will adapt to
most power outlets found worldwide
NOTES: Do not leave the adapter in the power outlet when not in use.
Do not use adapter plugs if they are not working correctly, have been
damaged, or dropped in water.
Adapter plugs
Ensure that the dual voltage selector switch on your appliance,
when provided, is in the correct voltage position before operating.
Conrm the voltage available at each overseas location before
using these adapters with an appliance.
For more information
For troubleshooting, specications, legal notices, and warranty, see
www.dynexproducts.com.
© 2010 BBY Solutions, Inc., All Rights Reserved.
ENGLISH 10-0651
Loading...