Dyna-Glo IR12 Series, IR18 Series, IR30 Series, BF10 Series, BF20 Series User Manual
...
Wall Heater Fan
MODEL #: WHF100
This fan is a CSA approved component compatible
with these GHP Group wall heaters only
IR12 Series
IR18 Series
IR30 Series
BF10 Series
BF20 Series
MAN AUTO
BF30 Series
:
IMPORTANT INSTRUCTIONS
PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE
WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING
PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
WARNING: THIS PRODUCT IS ONLY FOR USE WITH MODELS SPECIFIED IN THIS MANUAL BY THE MANFACTURER. ANY OTHER USAGE OR
INSTALLATION NOT SPECIFIED IN THIS MANUAL IS PROHIBITED.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
Questions, problems, missing parts? Before returning to your retail-
er, call our customer service department at 1-877-447-4768, 8:30 a.m.
– 4:30 p.m. CST, Monday – Friday or email us at customerservice@
ghpgroupinc.com.
IMWHF - 2014-10-20
1
SAFETY INFORMATION SAVE THESE INSTRUCTIONS
IMPORTANT: Read this owner’s manual carefully and completely before trying to
assemble, operate,or service this heater. Improper use of this heater can cause
serious injury or death from burns, re,explosion, electrical shock, and carbon
monoxide poisoning.
WARNING: Electrical Grounding Instructions
This appliance is equipped with a three-prong (grounding) plug for your protec-
tion against shock hazard and must be plugged directly into a properly grounded
three-prong receptacle.
WARNING: Any change to this heater or its controls can be dangerous.
WARNING: Make sure any panel, safety screen or guard removed for
servicing an appliancemust be replaced prior to operating the heater.
WARNING: Do not use any accessories not approved for use with this heater.
1. Read all instructions before using this appliance.
2. If possible always unplug this appliance when not in use.
3. Do not operate any heater with a damaged cord or plug or after the appli-
ance malfunctions, has been dropped or damaged in any manner.
4. Under no circumstances should this appliance be modied. Parts having to
be removed for servicing must be replaced prior to operating this appliance
again.
5. Do not use outdoors.
6. This heater is not intended for use in bathrooms, laundry areas and similar
indoor locations. Never locate this appliance where it may fall into a bathtub or other water container.
7. Do not run cord under carpeting. Do not cover cord with throw rugs, run-
ners or the like. Arrange cord away from trafc areas and where it will not
be tripped over.
8. To disconnect this appliance, turn controls to the off position, then remove
plug from outlet.
9. Connect to properly grounded outlets only.
10. This appliance, when installed must be electrically grounded in accordance
with local codes, with the current USA installations, or in the absence of local codes, the National Electric Code, ANSI/NFPA No. 70.
11. Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock, re or damage the appliance.
12. To prevent possible re, do not block air intakes or exhaust in any manner.
13. Use this appliance only as described in this manual. Any other use not
recommended by the manufacturer may cause re, electric shock or injury
to persons.
14. Installation and repair should be done by a qualied service person. The
appliance should be inspected before use and at least annually by a professional service person. More frequent cleaning may be required due to
excessive lint from carpeting, bedding material, etc. It is imperative that
control compartments, burners and circulating air passageways of the appliance be kept clean.
2
Loading...