DYMO 1815990, 1756589, 1801611 User Manual

Prepared by

Approved by

Wei He

Xingqun Zhang

Date： Dec. 16，2014

Date： Dec. 16，2014

MATERIAL SAFETY DATA SHEET

Lithium Cylindrical Rechargeable Battery

Model: Lithium-ion Cylindrical Battery

The information and recommendations set forth are made in good faith and believed to be accurate as of the date of preparation.
SPRINGPOWER TECHOLOGY SHENZHEN CO.,LTD. makes no warranty, expressed or implied, with respect to this information and
disclaims all liabilities from reliance on it --- File No./Rev.: SP-MSDS-0004/E06

Page 1 of 10

Material Safety Data Sheet

Chemical

Composition

Molecular Formula

Weight%

CAS No

OSHA(PEL)

ACGIH(TLV)

Co

Co

<40%

7440-48-4

N/A

N/A

Polyvinylidene

fluoride

（CH2CF2）n

<2%

24937-79-9

N/A

N/A

Graphite powder

C

<30%

7782-42-5

N/A

N/A

Electrolyte

LiPF6 C3H4O3 C4H6O3 C3H10O3

<20%

21324-40-3

N/A

N/A

Polyethylene

（C2H4）n

0.5-5%

9002-88-4

N/A

N/A

Copper foil

Cu

<10%

7440-50-8

N/A

N/A

Nickel

Nickel

0.5-5%

7440-02-0

N/A

N/A

Aluninum foil

Al

0.5-5%

7429-90-5

N/A

N/A

PVC

(C2H3Cl)x

0.5-5%

9002-86-2

N/A

N/A

SSeeccttiioonn 22--CCoommppoossiittiioonn//IInnffoorrmmaattiioonn oonn IInnggrreeddiieenntts

s

SSeeccttiioonn 33--HHaazzaarrddss IIddeennttiiffiiccaattiioonn

SSeeccttiioonn 11--CChheemmiiccaall PPrroodduucctt aanndd CCoommppaannyy IIddeennttiiffiiccaattiioon

n

SSeeccttiioonn 11--CChheemmiiccaall PPrroodduucctt aanndd CCoommppaannyy IIddeennttiiffiiccaattiioon

n

PPrroodduucctt IIddeennttiiffiiccaattiioonn

Lithium-Ion Cylindrical battery

18500-1400 mAh

Norminal Voltage ： 3.7V
Equivalent Lithium content ： ≤20Wh

MMaannuuffaaccttuurreerr

SPRINGPOWER TECHOLOGY SHENZHEN CO.,LTD
Chaoshun Industrial Zone, Renmin Road, Fumin, Guanlan, Baoan, Shenzhen, Guangdong, China

Postcode ： 518110
Telephone ： [phone]-8919
Fax ： [phone]
E-mail ： [e-mail]

SSeeccttiioonn 22--CCoommppoossiittiioonn//IInnffoorrmmaattiioonn oonn IInnggrreeddiieennttss

Page 2 of 10

The information and recommendations set forth are made in good faith and believed to be accurate as of the date of preparation.
SPRINGPOWER TECHOLOGY SHENZHEN CO.,LTD. makes no warranty, expressed or implied, with respect to this information and
disclaims all liabilities from reliance on it --- File No./Rev.: SP-MSDS-0004/E06

Preparation
hazards and
classification

Not dangerous with normal use. Do not dismantle, open or shred Li-ion Battery.
Exposure to the ingredients contained within or their ingredients products could be harmful.

Appearance,
Color, and
Odor

Solid object with no odor, no color.

Primary
Route(s) of
Exposure

These chemicals are contained in a sealed stainless steel enclosure. Risk of exposure occurs
only if the cell is mechanically, thermally or electrically abused to the point of
compromising the enclosure. If this occurs, exposure to the electrolyte solution contained
within can occur by Inhalation, Ingestion, Eye contact and Skin contact.

Potential
Health
Effects:

ACUTE (short term): see Section 8 for exposure controls In the event that this battery has
been ruptured, the electrolyte solution contained within the battery would be corrosive and
can cause burns.
Inhalation: Inhalation of materials from a sealed battery is not an expected route of
exposure. Vapors or mists from a ruptured battery may cause respiratory irritation.
Ingestion: Swallowing of materials from a sealed battery is not an expected route of
exposure. Swallowing the contents of an open battery can cause serious chemical burns of
mouth, esophagus, and gastrointestinal tract.
Skin: Contact between the battery and skin will not cause any harm. Skin contact with
contents of an open battery can cause severe irritation or burns to the skin.
Eye: Contact between the battery and the eye will not cause any harm. Eye contact with
contents of an open battery can cause severe irritation or burns to the eye.
CHRONIC (long term): see Section 11 for additional toxicological data

Medical
Conditions
Aggravated
by
Exposure

Not applicable

Reported as
carcinogen

Not applicable

Inhalation

If contents of an opened battery are inhaled, remove source of contamination or move victim
to fresh air. Obtain medical advice.

SSeeccttiioonn 44--FFiirrsstt--aaiidd MMeeaassuurreess

SSeeccttiioonn 33--HHaazzaarrddss IIddeennttiiffiiccaattiioonn

SSeeccttiioonn 44--FFiirrsstt--aaiidd MMeeaassuurreess

Page 3 of 10

The information and recommendations set forth are made in good faith and believed to be accurate as of the date of preparation.
SPRINGPOWER TECHOLOGY SHENZHEN CO.,LTD. makes no warranty, expressed or implied, with respect to this information and
disclaims all liabilities from reliance on it --- File No./Rev.: SP-MSDS-0004/E06

Skin contact

If skin contact with contents of an open battery occurs, as quickly as possible remove
contaminated clothing, shoes and leather goods. Immediately flush with lukewarm, gently
flowing water for at least 30 minutes. If irritation or pain persists, seek medical attention.
Completely decontaminate clothing, shoes and leather goods before reuse or discard.

Eye contact

If eye contact with contents of an open battery occurs, immediately flush the contaminated
eye(s) with lukewarm, gently flowing water for at least 30 minutes while holding the eyelids
open. Neutral saline solution may be used as soon as it is available. If necessary, continue
flushing during transport to emergency care facility. Take care not to rinse contaminated
water into the unaffected eye or onto face. Quickly transport victim to an emergency care
facility.

Ingestion

If ingestion of contents of an open battery occurs, never give anything by mouth if victim is
rapidly losing consciousness, or is unconscious or convulsing. Have victim rinse mouth
thoroughly with water. DO NOT INDUCE VOMITING. Have victim drink 60 to 240 mL
(2-8 oz.) of water. If vomiting occurs naturally, have victim lean forward to reduce risk of
aspiration. Have victim rinse mouth with water again. Quickly transport victim to an
emergency care facility.

Flammable
Properties

In the event that this battery has been ruptured, the electrolyte solution contain within the
battery would be flammable. Like any sealed container, battery cells may rupture when
exposed to excessive heat; this could result in the release of flammable or corrosive
materials.

Suitable
extinguishing
Media

Use extinguishing media suitable for the materials that are burning.

Unsuitable
extinguishing
Media

Not available
Explosion
Data

Sensitivity to Mechanical Impact: This may result in rupture in extreme cases
Sensitivity to Static Discharge: Not Applicable

Specific
Hazards
arising from
the chemical

Fires involving Li-ion Battery can be controlled with water. When water is used, however,
hydrogen gas may evolve. In a confined space, hydrogen gas can form an explosive mixture.
In this situation, smothering agents are recommended to extinguish the fire

Protective
Equipment
and
precautions
for firefighters

As for any fire, evacuate the area and fight the fire from a safe distance. Wear a
pressure-demand, self-contained breathing apparatus and full protective gear.
Fight fire from a protected location or a safe distance. Use NIOSH/MSHA approved
full-face self-contained breathing apparatus(SCBA) with full protective gear.

SSeeccttiioonn 55--FFiirree FFiigghhttiinngg MMeeaassuurreess

Page 4 of 10

The information and recommendations set forth are made in good faith and believed to be accurate as of the date of preparation.
SPRINGPOWER TECHOLOGY SHENZHEN CO.,LTD. makes no warranty, expressed or implied, with respect to this information and
disclaims all liabilities from reliance on it --- File No./Rev.: SP-MSDS-0004/E06

NFPA

Health: 0 Flammability: 0 Instability: 0

Personal Precautions, protective equipment, and
emergency procedures

Restrict access to area until completion of
clean-up. Do not touch the spilled material. Wear
adequate personal protective equipment as
indicated in Section 8.

Environmental Precautions

Prevent material from contaminating soil and
from entering sewers or waterways.

Methods and materials for Containment

Stop the leak if safe to do so. Contain the spilled
liquid with dry sand or earth. Clean up spills
immediately.

Methods and materials for cleaning up

Absorb spilled material with an inert absorbent (dry
sand or earth). Scoop contaminated absorbent into an
acceptable waste container.
Collect all contaminated absorbent and dispose of
according to directions in Section 13. Scrub the area
with detergent and water; collect all contaminated
wash water for proper disposal.

Handling

Don’t handling Li-ion Battery with metalwork. Do not
open, dissemble, crush or burn battery.
Ensure good ventilation/ exhaustion at the workplace.
Prevent formation of dust. Information about
protection against explosions and fires: Keep ignition
sources away- Do not smoke.

Storage

If the Li-ion Battery are subject to storage for such a
long term as more than 3 months, it is recommended
to recharge the Li-ion Battery periodically.
3 months: -10 ℃ ~+40 ℃ , 45 to 85%RH And
recommended at 0℃~+35℃ for long period storage.
The capacity recovery rate in the delivery state (50%
capacity of fully charged) after storage is assumed to

SSeeccttiioonn 77--HHaannddlliinngg aanndd SSttoorraaggee

SSeeccttiioonn 66--AAcccciiddeennttaall RReelleeaassee MMeeaassuurreess

SSeeccttiioonn 66--AAcccciiddeennttaall RReelleeaassee MMeeaassuurreess

The information and recommendations set forth are made in good faith and believed to be accurate as of the date of preparation.
SPRINGPOWER TECHOLOGY SHENZHEN CO.,LTD. makes no warranty, expressed or implied, with respect to this information and
disclaims all liabilities from reliance on it --- File No./Rev.: SP-MSDS-0004/E06

Page 5 of 10

be 80% or more. The voltage for a long time storage
shall be 3.7V~4.2V range.

Do not storage Li-ion Battery haphazardly in a box or
drawer where they may short-circuit each other or be
short-circuited by other metal objects.
Keep out of reach of children.
Do not expose Li-ion Battery to heat or fire.
Avoid storage in direct sunlight.
Do not store together with oxidizing and acidic
materials.

Engineering Controls

Use local exhaust ventilation or other engineering
controls to control sources of dust, mist, fumes and
vapor. Keep away from heat and open flame. Store in
a cool, dry place.

Personal Protective Equipment

Respiratory Protection: Not necessary under
normal conditions.
Skin and body Protection: Not necessary under
normal conditions, Wear neoprene or nitrile rubber
gloves if handling an open or leaking battery.
Hand protection: Wear neoprene or natural rubber
material gloves if handling an open or leaking
battery.
Eye Protection: Not necessary under normal
conditions, Wear safety glasses if handling an open or
leaking battery.

Other Protective Equipment

Have a safety shower and eye wash fountain readily
available in the immediate work area.

Hygiene Measures

Do not eat, drink, or smoke in work area.
Maintain good housekeeping.

SSeeccttiioonn 88--EExxppoossuurree CCoonnttrroollss//PPeerrssoonnaall PPrrootteeccttiioonn

SSeeccttiioonn 99--PPhhyyssiiccaall aanndd CChheemmiiccaall PPrrooppeerrttiieess

SSeeccttiioonn 88--EExxppoossuurree CCoonnttrroollss//PPeerrssoonnaall PPrrootteeccttiioonn

SSeeccttiioonn 99--PPhhyyssiiccaall aanndd CChheemmiiccaall PPrrooppeerrttiieess

The information and recommendations set forth are made in good faith and believed to be accurate as of the date of preparation.
SPRINGPOWER TECHOLOGY SHENZHEN CO.,LTD. makes no warranty, expressed or implied, with respect to this information and
disclaims all liabilities from reliance on it --- File No./Rev.: SP-MSDS-0004/E06

Page 6 of 10